No video :(

AutoCAD House Design (3D)- Part 2- AutoCAD 2D to 3D conversion (2021)

Подписаться 29 тыс.

Просмотров 265 тыс.

50% 1

#civil #autocad #3dhouse #caddmaniac #3Dhome #construction #engineering #civilengineering #engenhariacivil #engineer #architecture #civilengineer #design #building #civilconstruction #civilengineers
This tutorial is all about creating a complete 3D house in AutoCAD in easiest of steps.This video in particular is about converting the 2D plan into 3D building using autocad 2016.
Best laptops for AutoCAD:
AVITA LIBER
amzn.to/2GZpfSG
Acer Aspire 3
amzn.to/2Irytax
ASUS TUF Gaming
amzn.to/376x3fX
HP 14
amzn.to/37aGw5Y
ASUS TUF Gaming
amzn.to/2SSjLeV
AutoCAD 3D House tutorial 2018- Part 1- Creating the 2D plan:
• [ COMPLETE ] APARTMENT...
AutoCAD 3D House tutorial 2018- Part 3- Staircase design:
• AutoCAD House Design (...
AutoCAD 3D Mechanical Modelling • AutoCAD 2025 3D Tutori...
Must Watch: AutoCAD 3D House Tutorial • [ COMPLETE ] AutoCAD 3...
Making a simple floor plan in AutoCAD (In English): Part 1 (2019) • AutoCAD 2023 || Making...
AutoCAD 3D House tutorial Playlist 1 • AutoCAD House Design
AutoCAD 3D House tutorial Playlist 2 • AUTOCAD HOUSE DESIGN |...
AutoCAD complete tutorial for beginners playlist • Autodesk AutoCAD 2016 ...
To subscribe:
/ caddmaniac
................................................................................................................
Leaf by KV / kvmusicprod Creative Commons - Attribution 4.0 International - CC BY 4.0 www.creativecommons.org/licenses/by/4.0/ Music promoted by Audio Library • Leaf - KV (No Copyrigh...

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 148

@CADDMANIAC 2 года назад

If interested in learning 𝗔𝘂𝘁𝗼𝗖𝗔𝗗 𝗦𝘂𝗯𝗺𝗶𝘀𝘀𝗶𝗼𝗻 𝗦𝗵𝗲𝗲𝘁 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻 course, Install 𝗖𝗔𝗗𝗗 𝗠𝗮𝗻𝗶𝗮𝗰 app from Google Play Store. • 𝗗𝗲𝗺𝗼 𝘃𝗶𝗱𝗲𝗼𝘀 available • 𝟮 𝗠𝘂𝗻𝗶𝗰𝗶𝗽𝗮𝗹𝗶𝘁𝘆 approved 𝗗𝗪𝗚 𝗳𝗶𝗹𝗲𝘀 will be provided • 𝗔𝗽𝗽 𝗟𝗶𝗻𝗸- edushield.page.link/QVgK • 𝗪𝗲𝗯 𝗟𝗶𝗻𝗸- pyucm.courses.store

@itmakesense888 8 месяцев назад

Bro I just finished my project in minutes because of you thanks man

@CADDMANIAC 8 месяцев назад

You're welcome

@Itskitty72 4 месяца назад

hey can you help me to make my 2d house plan into 3d plan

@harshvardhankhengar1785 Год назад

Thank you sir ...had a doubt where to start 3d drawing of a plan and this video is perfect❤

@CADDMANIAC Год назад

You're welcome

@patagraouuuu 4 года назад

Well done sir! Great job, just what I needed. You explain also everything, something not everyone does that. Also a question: seems I can’t find part 1 of this video series. Any link? Keep up the good job of yours!! Thanks in advance!🎈🎈

@CADDMANIAC 4 года назад

AutoCAD 3D- House Design (2019): ru-vid.com/group/PLckueuGWNoTtR81BsasCOKg7a4TeSLhjZ Go to the channel page and check the playlist, I hope you will get everything you want

@jilujilukshan5847 Год назад

Superb, your better then my teacher 👍

@CADDMANIAC Год назад

Thanks

@hsn5553 Год назад

One word from my depth of heart ❤️ 😘 love you

@CADDMANIAC Год назад

Thank you so much

@itsanewday5219 4 года назад

THANK U A LOT.I HV LEARNT MANY THINGS FROM YOUR TUTORIAL

@CADDMANIAC 4 года назад

You're welcome

@itsanewday5219 4 года назад

@@CADDMANIAC sir my window cutout is not showing.Its showing like a wall.what to do?

@CADDMANIAC 4 года назад

@@itsanewday5219 use presspull command to presspull cut the window cutout then

@monahossein9935 3 года назад

thanks

@abubakarahmed7997 2 года назад

I have followed all tour video and rally enjoyed it. You really know to explain. On my side i would like to ask you if you can talk a bit slowly. Thank you

@CADDMANIAC 2 года назад

Yes of course Check the videos uploaded lately, I have spoken slowly

@worldcolors444 4 года назад

Sir bcoz of ur video we now know how can go to 3d mode , but how we can go to 2d interface from 3d interface

@CADDMANIAC 4 года назад

If you mean how to extract 2d drawing from 3d model, then I'll soon be making video on that, stay connected

@monjurulhaque_ 4 года назад

When i make it conceptual it forms a entire block, its not forming only walls, what to do, i followed your every step

@CADDMANIAC 4 года назад

First change the visual style to conceptual, then select the walls and try to extrude or presspull; WhatsApp me if it doesn't get rectified

@brananolachristinejewel328 2 месяца назад

Oh my gosh thank you so much

@CADDMANIAC 2 месяца назад

You're welcome

@chinenyelucia1766 5 лет назад

Hi please my drawing refuse to pull up I don't know way ,please what can I do

@CADDMANIAC 5 лет назад

Send me the .dwg file I'll see what's the problem

@mohammadfarhankhan2841 2 года назад

While drawing a rectangle for window cutout osnsp not picking end point of window. Only picking for first window

@CADDMANIAC 2 года назад

Sorry for replying late I hope your problem is solved

@muktarhussein6323 9 месяцев назад

Thanks for your tutorial course

@CADDMANIAC 8 месяцев назад

You are welcome

@rocky8004 10 месяцев назад

Awesome teaching Sir Ji

@CADDMANIAC 10 месяцев назад

Thanks

@prasadambre24 2 года назад

Thank you ❤️🌟

@CADDMANIAC 2 года назад

You are welcome

@rajatbhattacharya976 5 лет назад

Nice sir

@CADDMANIAC 5 лет назад

Thanks Rajat

@rajatbhattacharya976 5 лет назад

@@CADDMANIAC thanks et ki a6e sir

@isaacbissah3035 Год назад

Well taught but please can you elaborate on how to change the workspace to 3D modelling in autocad 2021?

@CADDMANIAC Год назад

There is a settings kind of symbol in the lower right corner of the screen (status bar), click on that and change the workspace

@akeshagarwal794 4 года назад

Sir, some window got subtracted from wall And some din it's just showing outcut mark of window

@CADDMANIAC 4 года назад

Use presspull command for creating the remaining window cutouts

@Sudash_ 5 лет назад

Sir make a video for mechanical engineering also .

@CADDMANIAC 5 лет назад

Check the mechanical modelling playlist m.ru-vid.com/group/PLckueuGWNoTslCNzzheoNJpuJIRpbvVoU

@Kmh547 4 года назад

Best understanding searching sir thanks

@CADDMANIAC 4 года назад

You're welcome

@rahuldey6248 3 года назад

Thank you so much sir I can done it..

@CADDMANIAC 3 года назад

You're welcome

@rahuldey6248 3 года назад

Bt sir I have a doubts civil engineer's 3d autocad design need ?

@CADDMANIAC 3 года назад

@@rahuldey6248 edushield.page.link/QVgK Install this app, this has best civil engineering courses

@narinder7043 3 месяца назад

How do we house drawings from own measurements? thanks

@CADDMANIAC 3 месяца назад

You have to learn planning and of course with practice you will get better

@humangoodness 2 года назад

When I click on Join, it says 0 objects joined, ## discarded. I have checked every possible lines that are not crossing. Can you help on this?

@CADDMANIAC 2 года назад

Send me the file

@stonenet8155 4 года назад

Sir, Please Can I send you my ground floor drawing and if you can convert it into 3D..?

@CADDMANIAC 4 года назад

I hope you will be able do it yourself after watching the complete series

@ghassanjenainaty4212 2 года назад

@@CADDMANIAC what is the name of the part where we draw the complete ground floor which includes adding furnitures ? I guess it proceeds this video. i need to see it please to continue the series

@livingninja9664 2 года назад

Sorry to say bro, you're too fast . I am a beginner and didn't understand you. make this video for beginner

@CADDMANIAC 2 года назад

Sorry for that but check the other playlists, I hope that will be helpful for you

@joyahabib4535 Год назад

Take my heart

@CADDMANIAC Год назад

Thank you so much

@mulgova7294 2 года назад

I’d love to take your assistance to convert my 2D floor plan to 3D floor plan. Is there a way I could contact you to discuss details and pricing?

@CADDMANIAC 2 года назад

caddmaniac18@gmail.com

@amosjallah4643 4 месяца назад

Where's the link to the floor plan?

@CADDMANIAC 4 месяца назад

drive.google.com/open?id=1V8NLvBc-XuwZYozwKbnyG3eO6pAAlFX7

@nikhilareddyvanga 4 года назад

While using the extrude command I am getting lines ,how can it get avoid sir,and one more doubt join the lines is not getting through the join command

@CADDMANIAC 4 года назад

No replacement of join command, if you know boundary function, use that n try; properly join and then extrude to make a solid object; you might be extruding to surface, that's why it's showing too many lines

@LardoIII Год назад

Hi it's me again from the previous video. Quick question; my rectangles aren't working properly, like it would not snap and sometimes it won't rotate or i dont know what to call it but it just won't come out like yours. :(

@CADDMANIAC Год назад

Make a video and whatsapp it

@LardoIII Год назад

nvm I got it awesome vid!

@CADDMANIAC Год назад

Thanks

@shruti7748 2 года назад

how did you extrude that im unable to do that 😢

@CADDMANIAC 2 года назад

Pls recheck, you will be able to do it for sure

@prudhvi5211 5 лет назад

Sir while i am practicing in the 3d modelining buliding,at starting video U said join, after over kill and i was also a draw the polylines only but extruding time the buildings was coming "on the top view full completed not it was in gap in the walls

@CADDMANIAC 5 лет назад

Sorry I didn't get you Join my FB page and ask me there, link given below: facebook.com/caddshelter

@prudhvi5211 5 лет назад

@@CADDMANIAC i draw the plan with polylines ,after extruding 9'6" It was came but ,in the walls are there know the walls are gap is coming in above the vedio the while extruding the walls are came with rectangle with finish,i hope u understand

@CADDMANIAC 5 лет назад

Make sure the lines doesn't overlap at the corners, neither there should be any gap at the corners, then join and try again, if it doesn't work then try presspull command to extrude the walls, make sure you click in between the lines not on the lines while presspulling

@ccl4436 Год назад

Really very helpful

@CADDMANIAC Год назад

Thanks

@Siphala-group 3 года назад

Thank you sir.

@CADDMANIAC 3 года назад

You're welcome 😊

@Sambit_Swain 4 года назад

while drawing a rectangle for door cutouts, it gets created on random plane .what to do?

@CADDMANIAC 4 года назад

I think your dynamic ucs is on, if so, then press f6 to turn it off & make sure the ucs is set to 'top' or 'world'

@mujtabasamejo9299 4 года назад

sir I have a prolem in wireframe it shows lots of lines/wires in wireframe instead of single lines like yours please help

@CADDMANIAC 4 года назад

Then you have not extruded it properly, you have extruded it into surface, try again, convert the lines into polylines first by using join command then extrude it properly to make it solid not surface

@mujtabasamejo9299 4 года назад

@@CADDMANIAC ok thanks sir solved..

@androidbd2703 4 года назад

Thanks

@CADDMANIAC 4 года назад

You're welcome 😊

@siddhantshekhar6279 4 года назад

Sir I can't justify the correct position of door and window by rectangle tool in 3d i.e.end to end point connection How can I rectify???

@CADDMANIAC 4 года назад

Mention the "time" in the video where you are facing difficulty

@siddhantshekhar6279 4 года назад

Sir 1:03 to 1:36

@CADDMANIAC 4 года назад

Make sure the dynamic ucs is turned off, function key f6 is the shorcut, and also make sure the ucs is set to 'world' or 'top' and object snap must be turned on as well (shorcut key- f3).

@mahendrasinghbhakuni524 3 года назад

Full help full

@cadtechnology9889 4 года назад

Sir please send the link of part-2 2d

@CADDMANIAC 4 года назад

This is the 2nd part only There are total 14 videos in this series, go to channel home page, click on playlist and access the playlist you want

@umerjaan8460 3 года назад

Sir plz i also need a plan... In 2d and 3d also

@PATHMINDER 4 года назад

Thanks a lot.

@CADDMANIAC 4 года назад

You're welcome

@anubhutiagrawal7016 4 года назад

Isolate option is not showing do there any way to select polyline

@CADDMANIAC 4 года назад

You have to select the wall first then right click to get the "isolate" option; or otherwise select the polyline by using blue window selection; still if you face any issues then send snapshot or short clip to the WhatsApp number provided in the about section of the channel