Autodesk Inventor - Surface Modeling Canadian Canoe

Подписаться 15 тыс.

Просмотров 384 тыс.

50% 1

In this video I show several surface modeling techniques in Autodesk Inventor. In fact most of the normal commands in Autodesk Inventor support solid modeling as well as surface modeling, which makes Autodesk Inventor not just a very powerful solid modeler, but a great surface modeling tool as well.
The canoe modeled in this Autodesk Inventor video is fairly easy to do for most Autodesk Inventor users. Autodesk Inventor commands used are mostly Loft, Stitch, Splines, Extrude Sweep Trim, Patch & Thicken.
When I create more complex parts in Autodesk Inventor, I like to use some surface modeling tools in Autodesk Inventor. It's good to try and learn some of them if you want to start modeling complex parts in Autodesk Inventor.
To reduce video time, I've speeded up the video about 20%, if you would like a slower version, let me know and I'll upload it.

Хобби

Опубликовано:

14 ноя 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@ClayClaim 8 лет назад

Your video is so great!! I know how complicated it can be… Looking forward to see more videos :)

@dirkkanters2453 8 лет назад

Hey there, Been using inventor for some years now, this was very usefull!! thanks

@Aksh_tremist 3 года назад

Great work 😃 Looking forward for many more videos like this!!! Thanks 👏👏👏

@wesco123 Год назад

Stunning work. Magnificent design intent.

@mohsengerdakaneh5495 5 лет назад

That was great Nima, tnx a million

@perrycharles247 9 лет назад

You should add audio to this clip for bginners to instruct them how you created the tangent curve and other dimensions. It will be helpful.

@RcWorldLive 4 года назад

i mean this contruct is not fot beginners :(

@bubblesbroken7969 4 года назад

Fly more recording ur an idiot

@Thestripper1 4 года назад

@@bubblesbroken7969 Please don't be rude to others.

@bubblesbroken7969 4 года назад

Thestripper shut up nerd

@kemalsworkshop Год назад

This tutorial was so helpful for me, especially it has proper way for 3D sketching.. Thanks..

@juanjosesanchezcuervo942 3 года назад

Nice job! Thanks for sharing.

@mehrdadfarimani1832 8 лет назад

very well done man

@OpenFOAMbasic 5 лет назад

good tutorial! thanks!

@christopherpalmer7250 9 лет назад

I thought this was an excellent and quite fun challenge to work with. My only suggestion, slow it down a bit. My problem wasn't re-creating this canoe. It was keeping up with the creator of the canoe. But props, overall fantastic tutorial.

@penguin0123 9 лет назад

You can change velocity to 0.25. That works

@atulimakvana1092 4 года назад

Good guidance for surface modeling,....

@ronaldimus 10 лет назад

Very helpful..Can you have a demo doing a dagger? I'm having problems doing "loft"command. By the way, having audio would be great. Cheers.

@patrickmallon7392 3 года назад

Many thanks! top stuff!

@maxpower9393 10 лет назад

Love your vids! :D

@gebbe 10 лет назад

thanx!

@Sans9259997540 10 лет назад

nice designing and it is very helping

@gebbe 10 лет назад

thanx!

@TheQade 9 лет назад

Hey, im trying to make a bit simpler model, consisting of straight, rectangular-ish faces. no curves. Is there a way to cut the hull in couple pieces and unfold it like a sheet metal piece?

@VonSonnig 8 лет назад

This is how you do it. Thanks

@6969SpAcE6969 8 лет назад

Wondering how one can predict the behaviour of the intersection curve option when not using faces but lines, as you do in your first use of that option..

@cyrusIIIII 7 лет назад

How do you bring the fast menu options while working? Is that a button on the mouse?

@juaneduardomunguiagonzalez4810 3 года назад

Esa curva interceptada en el plano oblicuo me voló la cabeza

@cadcaetutorial2039 Год назад

Very nice sir

@martinvanecek90 10 лет назад

Nice.. :) Autodesk is the best :)

@gebbe 10 лет назад

haha, true

@jimmydryhands9288 10 лет назад

Hi NiMa - this is a very helpful tutorial I am glad I found it...I reached 7:50 mins with no issues but when it comes to trimming the top workplanes I am stuck. I realise that the problem is that the outer-top edges of the canoe are not selectable when for e.g. I try to fillet them. This is probably why the workplanes get trimmed by the whole top surface of the boat and not the "overboard" parts only....Any tips how to overcome this, i.e. the stiched canoe surface to have "active" (for lack of better term) edges? I hope I explained the problem properly and thanks a lot

@martinchristensen2803 9 лет назад

In inventor 2014, I have the same problem. But when I tried inventor 2013, there was no problem at all. Maybe that can help you.

@danseman51 7 лет назад

So if you were to use this in a real life situation. What would you do with your model? Use it for a large mold? Can you convert this to sheet metal pieces so you can have flat patterns? I'm doing a similiar project in which I'm modeling a single sheet boat and doing it in sheet metal so we can create life size templates. Then we are actually making the boat.

@farfandf 2 года назад

Hi, great video. This is only a surface? How do i can do it a solid piece? With thickness? Thanks

@ruupiejo 3 года назад

Hi, question is it possible to make flat pattern of the body so it is possible to lasercut?

@mutyafay9721 10 лет назад

thank you

@antranhuynhngoc9813 4 года назад

excellent

@bjarneholmstrm8171 7 лет назад

Nice👍

@MattKnowsThat 9 лет назад

I'm thinking about designing and building a cedar strip canoe someday. I'm wondering if after getting the shape right, can this program create cross section profiles for the forms which would be used to wrap the cedar strips? There would need to be a cross section every 12" or so.

@Chrisg288 8 лет назад

+Matt KnowsThat Yes it can easily have the stations as planes and profile sketches. In my experience, if you are trying to fair the lines numerical, it makes a difficult job, because Inventors Bezier lines are not very good in a 2d sketch or a 3d sketch.. but the section profiles (stations) are the easy part.. regular 2d sketching on a plane.

@huyluong4729 7 лет назад

thanks!

@armandofloresfloresg.3438 9 лет назад

que tal amigo, oye no puedo suprimir el plano hecho por extrusión con el comando cortar en modeldo 3d, para que ya se vea la canoa con el hueco, ya sin el plano, tengo el inventor 2015, no funciona como lo haces o me puedas de decir como hacerlo de otra manera gracias

@pawarswap88 8 лет назад

when I tried to loft according to the video it doesn't works! I am Using Inventor 2015. error it shows like "the operation had problems with specified rail curves not being smooth.Try to make the curves of the rail smooth across interior vertices." Please Help.

@mpam002 4 года назад

same problem

@JoaoZati 10 лет назад

the problem is in the loft, specifically in the second rail

@johnvanyperen4299 3 года назад

I can follow it to 5.37, the surface of the hull is ready, then you select a middle line and extrude it symmetric, we are not in a sketch, how can you extrude ?

@MrDiddebeck 10 лет назад

Nice video. What command do you use at 4:27 to select the point instead of the curve?

@kemalsworkshop Год назад

It was so clever way..

@robertmulryan1849 10 лет назад

Can you tell how you went from a straight line to a curve while still being within the line tool (Shortcut im not aware of) when you first start creating the sketch circa 1.10 in the video

@dmitryergo 10 лет назад

Keep LMB holded while in doing a line - and it becomes curve

@robertmulryan1849 10 лет назад

Thanks simple but effective

@badw01f23 8 лет назад

wish there was an adio explaining what's going on because I'm lost

@Perfectballer 8 лет назад

Command Loft dosent work .I have Invetor 2016

@guyeddington3469 4 года назад

I'm getting an error when I go to thicken / convert to solid (approx. 15:00). Are there special settings for the thicken / offset function? Anything else I need to know? Thanks

@guyeddington3469 4 года назад

By the way, I thought the rest of the tutorial was awesome up till that point. Very informative

@ismaelvella378 9 лет назад

when im trying to loft at 4.21 is giving me error :( i ve tried it 4 times with no success

@skhumbuzocele1330 3 года назад

It means you are still a novice....chill you will get there......😂😂😂😂😂😂😂😂😂😂😂😂😂

@KIMKim-ql8zx 9 лет назад

im unable to trim the surface at 8:07 ? what im doing wrong ? im selecting the canoe body as the cutting part and the extrusion above to remove , but my selection is not one by one like in the video , its the whole surface ...

@SAQIB1111111111 9 лет назад

KIM Kim 1st you stich the sweep part with other body then apply fillet command, it would then work

@aqharold 8 лет назад

does someone know why the 'loft' part at 4:30 does not work with me ?

@binayijam7807 8 лет назад

when you select the second rail make sure you select the whole line at the bottom and not just the arc. That will ensure your loft works.

@stephlu9684 6 лет назад

how does he-she switch a figure 180 degrees automatically like at : 6:14 ??

@davidhoff4622 9 лет назад

I've spent hours rechecking all protection points, lines. Everything is exactly like yours, but I cannot get past the error below complaining that the rail curve is not smooth when I try to loft the bow. I've even tried a G2 to the bow on the Sketch2, but the G2 smoother gets a "Failed to create constraint". I don't see anyone else posting this problem. Stumped but would love to know why. Create loft feature failed Canoe.ipt: Errors occurred during update LoftSrf1: Could not build this Loft The attempted Loft operation had problems with the specified rail curve not being smooth. Try with a different rail or try to make the curves of the rail smooth across interior vertices.

@dszyx 8 лет назад

+David Hoff Have you tried to tangent all the lines and curves?

@6969SpAcE6969 8 лет назад

+David Hoff Did you end up solving this?

@dszyx 4 года назад

@John E Great! Just simple solution solved the problem.

@user-cy7jz5dk2r 7 лет назад

hi can i get this inventor file for study ? if you don't mind now i am really interesing in making ship though inventor for study Thx

@Casey_J96 10 лет назад

I have inventor professional 2013 at home and 2014 at school. If I model a part on the 2013 version will I be able to continue work on it on the newer version?

@gebbe 10 лет назад

Hi CJ, you can, but keep in mind that once you have changed and saved it in 2014, you can't open it in 2013

@Casey_J96 10 лет назад

ok thanks. That was the original problem but all I need to do is put parts from both editions into an assembly so I shouldn't have to work on it again on the 2013 edition.

@user-bh2lg4xw5n 4 года назад

Awesome! Like. There is only one bad thing.... You did not save your model during developing ) I'd do it at least 10 times!

@tomaszmachaj6485 4 года назад

15:00 I have a problem with setting thickness. I don't know why but Error shows up... Can you suggest some solution for that? I use Inventor 2019 and can send you my itp. file

@techthatmatters141 4 года назад

Hey same problem here contact me as it it would help both of us. gunner1141781@gmail.com

@duckhorn 9 лет назад

could you tell the hot keys while you moving around mouse

@duynguyenuc6908 6 лет назад

@bledkharm 6 лет назад

Shift+Alt+Mouse while hold

@everthr9951 3 года назад

Tu video me estresó un chingo, pero gracias

@JoaoZati 10 лет назад

4:37 at that time there's a erro in my inventor it say that "the attempted loft oper operation had poblems with the specified rail curve not being smooth. try whit a rail or try to make the curves of the rail smooth across interior vertices."

@karimhanania2 9 лет назад

i got the same problem, and finally fix it by checking the sketch2 and i had a line repeated so it just left the lines of the rail. hope it helps

@jimmieclark8436 4 года назад

Ok, I know its been 5 years, but I had the same issue. Things I found out. I missed the fact she projected points from one plane to another, so when I went to constrain them while drawing, there was no constraint. I also missed when doing Sketch 2, where the curved lines have tangential constraints the the straight lines. Once I redid my sketch 2, and made all the constraints match, my loft worked like a charm. Hope this helps.

@photography4life384 9 лет назад

could you please send me the saved file so that i can do some upgrades please :D

@TAUFIKCADTUTOR 6 лет назад

good

@JasonSmith-sm4rs 2 года назад

Hi. Can I please get a slower copy.

@karimhanania2 9 лет назад

thnx

@thanhtra9339 8 лет назад

great. I want to draw a straight line and then continue the curve but could not.can you help me.

@DronemanfromNepal 7 лет назад

sam here .

@spencerclegg8753 7 лет назад

hold it down and it will start to curve

@brandonlovatt 8 лет назад

really wish there was audio

@JoaoZati 10 лет назад

what comand do you use from 0:53 till 1:44?

@gebbe 10 лет назад

Hi There, its actually just the line command, keep the left mousebutton pressed and you will get a tangent arc, great command.

@JoaoZati 10 лет назад

thx

@chitolot 10 лет назад

I'm trying to actually model the boat, and i have problems with the fillet part

@gebbe 10 лет назад

what is the actual problem?

@chitolot 10 лет назад

The software does not let me do the fillet

@gebbe 10 лет назад

Jorge Ibarra Hi Jorge, Send the model to my mail adres, nima3223@gmail.com. I'll take a look at it

@chitolot 10 лет назад

Okay thanks

@MrRoland0904 9 лет назад

Jorge Ibarra Did u use Inventor pro?

@davidMendoz613 5 лет назад

can I request for a surfboard?

@JoaoZati 10 лет назад

the fillet dosent work in 8:26

@SAQIB1111111111 9 лет назад

joao guilherme 1st you stich the sweep part with other body then apply fillet command, it would then work

@addywaddy39 6 лет назад

lofting doesnt work

@HecticHector 4 года назад

dimensions?

@emrekucuk87 3 года назад

Aynısını yapmama rağmen 4:20 deli loft komutunu smooot uyarısı yüzünden yapmıyor Inventor 2021 is very bad !!!

@muhammadikmal2619 7 лет назад

Can anyone help? Why I cant make the surface transform to solid.. the Thickness/Offset is showing error..

@guyeddington3469 4 года назад

Did you end up solving this issue? I'm having the same problem. Thanks

@tomaszmachaj6485 4 года назад

@@guyeddington3469 I also have problem with that

@techthatmatters141 4 года назад

Same problem here too contact me gunner1141781@gmail.com

@tomaszmachaj6485 4 года назад

@@techthatmatters141 Probably there is a problem with one narrow surface on the bottom of the kayak. Try to modify it.

@techthatmatters141 4 года назад

I did it, found my solution. So you don't go for 'quilt' and make whole structure solid at once, but go for 'face' and select individual surface and use 'join solid' command instead of 'new solid' and go on doing so for all surfaces. In case you didn't understand what I said you can contact me at gunner1141781@gmail.com

@wayneb1992 4 года назад

Without sound is insanely frustrating to try and follow, been over the video 30 + times and still no result and have no idea whats happening half the time

@craigdoon Год назад

Agreed. A commentary would help immeasurably

@stephlu9684 6 лет назад

Thickening the canoe doesn't work. Anyone has experienced this ?

@stephlu9684 6 лет назад

i found my solution...when i stiched the benches it stiched them on the boat , so it couldnt thicken only the canoe. I deleted the stich of the bench, to do it after the thickening part.

@John-mz8rj 4 года назад

Follow construction plane handy.

@PIRATA-oc5nh Год назад

Can't believe tNice tutorials is free

@amitraj3415 2 года назад

Why didn't you explained?? It took very long time to draw and some are still unfinished..

@snoopydogg9465 9 лет назад

This looks really complicated. Probably not for starter...

@Thestripper1 4 года назад

This is yet another canoe modelling video which fails to produce a "good canoe shape". It looks great and good enough for a rendering, but for a canoe enthusiast this is not even close. A canoe has a much more sophisticated shape than this. As of today there is to my knowledge no tutorial that goes through the steps to create a flawless shape. By "a flawless shape" we can consider the hallmark design and probably the most well known canoe of all times, the Prospector 16. Plan drawings of this is readily available. It's not an arbitrary lofted hull shape from a mid section to bow with two seats and a yoke... Cross sections at every 12" confirms the shape. If a fair lofted shape can be produced between these cross sections and connected to the bow and stern, then the model can be considered complete.