Тёмный

Avios KingTwin 1700mm Turboprop Airplane UNBOXING BUILD REVIEW 

JohnVHRC
Подписаться 16 тыс.
Просмотров 12 тыс.
50% 1

This is my HobbyKing Avios King Twin 1700mm Civilian RC Plane Unboxing Build Assembly Review.
Get one here!! bit.ly/3DckLQV
Radio I use: amzn.to/2ykFXUF bit.ly/2ZQm1ay
4s 3300 lipo battery: bit.ly/2XQOSx8
Speed GPS Meter: amzn.to/3krOxqi
ISDT BattGo BG-8S Battery Meter: amzn.to/2QWWWZJ
Spektrum XBC100 Smart Battery Checker: amzn.to/3wfaTCi
Camera used: amzn.to/3hmHXS3
My Amazon store: www.amazon.com...
Check out my merch! Appreciate your support! bit.ly/3mNpBwI
Some links are affiliate links, free for you to use, but give me a tiny commission off the sale, to help fund my channel! Thank you!
Check out my non rc channel! Something for EVERYONE! / @johnvhlife
Thanks GBLynden for shooting the video, Sub his channel!
This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. The simplistic, yet striking color scheme depicts the type of paint jobs commonly used on civilian propliners.
The KingTwin 1700 is packed full of cool features including LED lights, retracts, and split flaps. The powertrain of 2 x Aerostar 3748-820KV brushless outrunners with Aerostar 40A ESCs was chosen by the Avios team after careful testing. This combination of motors, ESCs, contra-rotating props, and a 4S LiPo battery proved to be the optimum setup for power and duration.
The KingTwin 1700 has the ability to operate happily off of smooth, short-grass fields, and of course hard runway surfaces. The split flaps enable scale take-offs and landings, and the daylight visible LED lights add that touch of realism.
For transportation, the outer wing panels feature a unique latching system that allows for quick and easy assembly and removal. This system also includes a quick connect/disconnect plug and socket for the servos and LED lights. Throughout, the KingTwin 1700 uses the very popular and reliable Turnigy HXT900 servos - this is a first for an Avios model. Due to the low parts count of the tough EPO airframe, and being PNF, the KingTwin 1700 is very quick and straightforward to put together, most of it has been pre-assembled at the factory.
The Avios KingTwin 1700 is fantastic to fly and looks brilliant in the air. It has excellent low-speed handling, and at speed, it really grooves and locks in. It's a real pleasure to fly. This impressive twin-engined model is a worthwhile addition to any modeler's hangar for its looks, ease of assembly, and excellent flight characteristics.
Features:
• A great looking sport/scale model of a typical twin-engined turboprop
• Powertrain is optimized for performance and duration
• Retractable landing gear, split flaps, and working, daylight visible LED lights
• Unique detachable wingtips for easy transportation
• Low parts count for easy, quick assembly of the EPO airframe
• Plug N Fly - motors, ESCs, HXT900 servos, and LED lights are pre-installed at the factory
• Excellent flying characteristics, especially at low speeds
Specs:
Type: Avios (PNF) KingTwin 1700 Sports/Scale Executive Turboprop Airplane
Wingspan: 1700mm
Length: 1196mm
Flying Weight: 2985g (inc battery)
Motor: 2 x Aerostar 3748-820KV brushless outrunner
ESC: 2 x Aerostar 40A brushless
Servos: 7 x Turnigy HXT900
Propellers: 1 x 3 blade L/H rotation, 1 x 3 blade R/H rotation
Landing Gear: 3 x Servoless retractable
Included:
1 x Avios KingTwin 1700 EPO airframe
2 x Aerostar 3748-820KV brushless outrunner
2 x Aerostar 40A brushless ESC
7 x Turnigy HXT900 servo
3 x Servoless retractable landing gear with scale oleos
1 x LED daylight visible LED system
1 x Set of scale parts
1 x Set of pushrods and connectors.
1 x Set of assorted screws
1 x Quick-Start set-up guide
Required:
6 channel transmitter and receiver
4S 3000~4000mAh LiPo/LiHv battery of 30C or more w/XT60
XT90 to XT60 battery adapter for battery packs fitted with XT90 connectors
Suitable LiPo battery charger
Adhesives
#kingair
#kingtwin
#hobbyking

Опубликовано:

 

16 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 63   
@reckemroysrc3764
@reckemroysrc3764 2 года назад
Really like the wing tips being removable. Such a good looking plane.
@JohnVHRC
@JohnVHRC 2 года назад
Yes! Make sure they snap in right when you get it out of the box. Some have had issues, mines fine
@LigthningII
@LigthningII 3 года назад
Just got mine.. Will start working on it as soon as I get rid of this sinus headache. Plane really looks good.
@JohnVHRC
@JohnVHRC 3 года назад
Nice! I know the pain, best of luck!
@victorrcjets7660
@victorrcjets7660 3 года назад
Nice job John! 👏
@JohnVHRC
@JohnVHRC 3 года назад
Thanks Victor!
@dutchloveRC
@dutchloveRC 2 года назад
a friend of mine loves his King Twin
@JohnVHRC
@JohnVHRC 2 года назад
Amazing flyer!!
@Mikeylikesit1968
@Mikeylikesit1968 3 года назад
I like the plane, did you have any problems putting it together and also hearing the nose strut is wiggly and weak steering .
@JohnVHRC
@JohnVHRC 3 года назад
zero problems, I put a bunch of expo on the nose steering so its manageable, Im happy with my setup.
@JeffsCustomRC
@JeffsCustomRC 3 года назад
Great video John, love this plane, flys awesome 👊🏼
@JohnVHRC
@JohnVHRC 3 года назад
Thanks buddy, yes it does, as you know!
@payitfwdrcl6171
@payitfwdrcl6171 3 года назад
John, looked like a simple assembly. Plug in wings, very nice. I hope that becomes the norm for new bigger foam models. Like to see a follow up review on how it holds up. Hope HK takes notes of any issues found and updates accordingly. I like scale and commercial planes in general. I’m keeping an eye on this one. 👍☺️
@JohnVHRC
@JohnVHRC 3 года назад
Yeah buddy, the plane has 4 flights on it now, will do more next week, I even flew it on a 4s 2200 for fun, I love it.
@mikenowland2739
@mikenowland2739 3 года назад
Good job John 👍
@FlankerTanker
@FlankerTanker 3 года назад
The cockpit hatch looks wrong to me - fpr me it would have been better had they left it all foam with decals like the rest of the "Windows" apart from that the limited spares (well it is Hobby King) I like it.. thanks for the Unboxing..I could not tell are the foam hinges laminated ? - really easy build - I might have missed it but were and how is the CG measured/located ? - thanks for the Vid
@JohnVHRC
@JohnVHRC 3 года назад
It looks really good out in the daylight.
@mrvoyagerm
@mrvoyagerm 2 года назад
Of course I want the King Twin but I noticed you have a great looking set up cradle - where can I get one of those? It looks a lot better than the foam ones.
@JohnVHRC
@JohnVHRC 3 года назад
This is my HobbyKing Avios King Twin 1700mm Civilian RC Plane Build Review. Get one here!! bit.ly/3DckLQV Radio I use: amzn.to/2ykFXUF bit.ly/2ZQm1ay 4s 3300 lipo battery: bit.ly/2XQOSx8 Speed GPS Meter: amzn.to/3krOxqi ISDT BattGo BG-8S Battery Meter: amzn.to/2QWWWZJ Spektrum XBC100 Smart Battery Checker: amzn.to/3wfaTCi Camera used: amzn.to/3hmHXS3 My Amazon store: www.amazon.com/shop/johnvhrc Check out my merch! Appreciate your support! johnvhrc-merch-store.creator-... Some links are affiliate links, free for you to use, but give me a tiny commission off the sale, to help fund my channel! Thank you! Check out my non rc channel! Something for EVERYONE! ru-vid.com/show-UCsC3...
@Big-Hass
@Big-Hass 3 года назад
Hey John, thanks for the video! What percentage of down elevator you needed for the full flaps, if any? Other reviewers seem to report the plane will pitch up without the down elevator mix. Thanks.
@JohnVHRC
@JohnVHRC 3 года назад
I dont use percentages, I use flight modes then trim the model in flight with each stage of flaps. That reminds me I need to make a video on how to do this so everyone can have a perfectly trimmed plane all the time!
@johnmueller3573
@johnmueller3573 3 года назад
Nice plane Enjoy flying it
@JohnVHRC
@JohnVHRC 3 года назад
Thank you, I have been!
@alangentry6295
@alangentry6295 3 года назад
Nice airplane John
@JohnVHRC
@JohnVHRC 3 года назад
Thanks Alan!
@DronemanJoeRc
@DronemanJoeRc 2 года назад
Hey bud nice, I have been waiting for this bird and now its instock and its like the HH twin otter but with retracts. Nice job
@JohnVHRC
@JohnVHRC 2 года назад
Thank you!
@DronemanJoeRc
@DronemanJoeRc Год назад
@@JohnVHRC what I would love to see and alot of ppl would like is how you setup the receiver to the trans. a full complete setup and details. I love the plane alot but im not liking the twig type gear. Id love to see you do a full rc and trans setup on how its done and nobody but the boring guy from HH and its so boring bud
@JohnVHRC
@JohnVHRC Год назад
@@DronemanJoeRc I’ll try to keep that in mind! New planes coming soon!
@ahsanrafiqueofficial8157
@ahsanrafiqueofficial8157 3 года назад
Good video great work
@JohnVHRC
@JohnVHRC 3 года назад
Thanks so much!
@re3065
@re3065 Год назад
How have the motor magnets and motor cowling held up for you?
@JohnVHRC
@JohnVHRC Год назад
Perfectly.
@sotm2
@sotm2 2 года назад
I also put electric Flyer hinge tape on all the control surface hinges. I'ved had foam hinges separate in flight before and that's not cool!
@marcoverdesca2534
@marcoverdesca2534 Год назад
HI, I followed your instructions and got the spektrum receiver with SAFE. Both motors run backward - how can I fix that please? It seems not easy access to the motor cables to switch them...
@JohnVHRC
@JohnVHRC Год назад
Odd. Must be a way to get to the escs to swap wires.
@ShadowOppsRC
@ShadowOppsRC 3 года назад
Cool bird.
@JohnVHRC
@JohnVHRC 3 года назад
VERY!!
@turkeyneckrc8916
@turkeyneckrc8916 2 года назад
Connected everything as you did. Plane will bind, conrol surfaces work but motors keep beeping. I've tried multiple y connectors thinking that was the issue but still doing it. Any ideas?
@JohnVHRC
@JohnVHRC 2 года назад
that usually happens if the throttle is not in the right spot, make sure its all the way down, try moving the trim to see if that cures it, then calibrate it to the throttle stick
@turkeyneckrc8916
@turkeyneckrc8916 2 года назад
@@JohnVHRC are the the red lead wires on the servo wires for throttles disconnected? Both mine are and taped back
@bladerunner469
@bladerunner469 Год назад
Try dropping your throttle trim some
@sotm2
@sotm2 2 года назад
I hope you checked the battery tray - those screws holding it do NOT hold it they are too short!!
@bassmanhb
@bassmanhb Год назад
What mah battery are you using, and flight times? Thanks
@JohnVHRC
@JohnVHRC Год назад
You should watch my flight videos, I show all that in them. 4s 4000.
@bassmanhb
@bassmanhb Год назад
I have watched them, thanks for doing them. But didn't see flight times anywhere.
@brianchambers1515
@brianchambers1515 3 года назад
nice👍🤠
@JohnVHRC
@JohnVHRC 3 года назад
Thanks Brian!
@normleonard52
@normleonard52 3 года назад
Hey John.....what did the finish and foam quality look like to you? We got the Bush Mule V2 and the quality was terrible. Was just curious about this one.
@JohnVHRC
@JohnVHRC 3 года назад
I haven’t had the bush mule. But I thought the foam quality was on par with everyone else. Seems just as good as my carbon z t28
@normleonard52
@normleonard52 3 года назад
@@JohnVHRC Cool...thanks. That's what I was wondering. The Bosh Mule had styrofoam wheels....the quality of the foam was terrible.....very rough. For lack of better description the foam was like very grainy looking....not smooth at all. Thanks for the info.
@leerenslear1064
@leerenslear1064 2 года назад
so where did you mount receiver inside fuselage, please ?...and ibec.
@JohnVHRC
@JohnVHRC 2 года назад
Its pretty much where I show it in the video, but just a touch farther back. ibec? Its behind the battery.
@patman6816
@patman6816 2 года назад
Yes where? I just saw it flopping around in the video.
@JohnVHRC
@JohnVHRC 2 года назад
@@patman6816 @13:13 is pretty close to where it is now. Its just behind the battery on that side.
@patman6816
@patman6816 2 года назад
@@JohnVHRC Ahhh so vertical on the inside of fuselage! Thanks... Mine arrives this week along with an AR630 6 ch receiver so I guess I will have to do your w-harness solution for the lights?
@tombutler8800
@tombutler8800 Год назад
What did you set the cg?
@JohnVHRC
@JohnVHRC Год назад
I did it by the book.
@gwrrolan
@gwrrolan 3 года назад
👊👊😊
@JohnVHRC
@JohnVHRC 3 года назад
BAMMM!
@f900ex5
@f900ex5 3 года назад
A spaghetti of wires coming from the main wing could of been avoided given what they did to the wing tips.
@JohnVHRC
@JohnVHRC 3 года назад
It doesn’t matter. Once the wing is on you never have to touch it again.
Далее
H-KING Paramotor V2 Unboxing and Assembly HOW TO!
22:58
Avios C-130 Tips And Tricks- What You Need To Know
16:10