Awesome Earthmovers Spend Time With the Fox Group & MUCH More! Chronicles Ch

Подписаться 34 тыс.

Просмотров 50 тыс.

50% 1

Welcome back for a another Chronicle. This 1 is special as Awesome Earthmovers are in for a couple of days doing a piece on Liugong/Foxy/Baz and the Fox group in general. Lots going on in this 1, it went a little long but I cut as much as I could while keeping it on track & showing most of the jobs I could.
Merch Website welderfabber.uk/
Awesome Earthmovers: awesomeearthmo...
Awesome Earthmovers: / @awesomeearthmovers
Expander website: bit.ly/46hOntk”
Check out our new sponsor Autovolt!
Autovolt is a software that helps businesses manage their parts, sales, and stock. It makes selling and buying parts easier, keeps track of invoices, and can be accessed through any browser online.
Check Autovolt out Here
autovolt.uk
Follow them here.
/ autovolt.uk
#weldlikeapro #welderlife
Thanks for watching, subscribe and smash the like button if you enjoy my content, hit the notification bell so you don't miss my latest videos. Featuring Welding, Fitting, Heavy Machines, Cutting and fabrication.
Follow Baz here.
/ welderfabber
Follow Cal here.
www.instagram....
Follow Luke here.
www.instagram....
Thanks to / @vinceopra for the editing tutorials. (beginners guide)
For masterclass visit www.magnetic-c... (I highly recommend it)
Linkedin / baz-martin-52a83026b
Linktree linktr.ee/weld...
hurtplant.co.uk
www.foxgroup.co/

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 156

@markrobinson1458 10 месяцев назад

Bet those lads of yours love it when you drive out of the yard 😂😂😂👍

@welderfabber 10 месяцев назад

Yeah I think so too mark

@markrobinson1458 10 месяцев назад

😂 you're a top bloke and possibly Fox's greatest asset 👍

@tavspeed1101 7 месяцев назад

think they will have a lot off respect for him,might micro manage

@tavspeed1101 7 месяцев назад

but kettle will be on,yorkshire tea of course

@jamesward5721 10 месяцев назад

When Luke was welding on that rotator - or any time you're welding with rods - an air needle scaler is mint for cleaning off the slag - makes it go much faster between passes.

@welderfabber 10 месяцев назад

We sometimes use them mate

@SuperTone35 10 месяцев назад

Yes james i agree. And as icweld says “it peens the weld too”

@petegraham1458 10 месяцев назад

Nice video, I am a retired engineer originally from Western Canada , we lived in England , Cheshire outside Manchester in Alderly Edge , I remember seeing the Fox trucks and equipment, my wife and I enjoyed our time in the UK but I will say we don’t miss the weather, just the people. We live in the Southeastern USA in retirement I spend most of my time in my workshop, glad you decided to use a different rod I was yelling you need to spark test that casting on the clam shell I think it,s Gray cast iron! You need some preheat and post weld cover for slow the heat loss .

@welderfabber 10 месяцев назад

Thanks, it amazes me I’ve got people watching all around the globe. Very humbling.

@martynm7659 10 месяцев назад

Good Morning Baz and Director and all welderfabber fans, excellent video once again. Having been in a completely different industry ie financial sector I find your channel very fascinating and therapeutic. Having seen foxy a few times he seems a decent down to earth chap who has worked his way to the top. Hope you all have lovely weekend ❤

@col2lin 10 месяцев назад

I am 1 of your earlest (subscriber) watchers. I have noticed that you like/want everything done yesterday. You get who you have deligated for that job, explain what/how you want done. Before you know it you are doing the main work with the welder just watching. There is a saying "You don't keep a dog & bark yourself". As a watcher I am greatful for as you go to a lot of trouble to explain, even I understand what is going on. You showed us your daughter saying that she is learning to weld. Please do that asap as there are a lot of girls that would bit your hand off if they knew/saw that anyone could weld & even do it well.

@welderfabber 10 месяцев назад

Its just when I get the time but it will happen

@SuperWayneyb 10 месяцев назад

Amazed how you keep your van cleaner and better organized working in mud and pissing down rain than most of us who never leave tarmac 🤣🤣🤣🤣🤣🤘😎🤘 Great video as always 👍👍

@welderfabber 10 месяцев назад

I was taught always clean your bench an tools from day 1 after a job I just do it with everything

@SuperWayneyb 10 месяцев назад

@@welderfabber 👍👍

@ianjbuilder7655 10 месяцев назад

Top vid chaps great to have a 1hour show ❤❤ great insight into welding lot more involved than the average person thinks .

@welderfabber 10 месяцев назад

Glad you enjoyed it Ian

@jimsvideos7201 10 месяцев назад

If I can share a little expertise with the dye penetrant: After the dwell period, wipe the excess dye off with a clean, *dry* wiper. Then wipe the inspection area with a new wiper with a very little bit of cleaner on it. Then apply developer. That'll get you the best sensitivity. You can put the dye on by spraying it onto a foam swab, if you want to avoid overspray.

@welderfabber 10 месяцев назад

thanks jim, always good helping explain better than I show

@ypaulbrown 10 месяцев назад

great comment Jim....

@davephillips5040 10 месяцев назад

Hi Baz didn't think adblue could come in contact with metal ie the tank on fuel truck oram I wrong ..great content director..keep videos coming 👍

@welderfabber 10 месяцев назад

Stainless steel tanks are ok mate

@lemmy9996 10 месяцев назад

No CEE this week , Baz and The Director are filling that gap!!👍👍

@keithrogers2107 10 месяцев назад

Excellent video , really varied content,starting to see the characters in the team getting used to being filmed working , lukes seems a bit of a lad !!

@suresren 10 месяцев назад

Hi Bazz, Another interesting video. Do you drill a hole at the end of any crack to stop the cracks spreading any further ,

@welderfabber 10 месяцев назад

We drill the ends of the crack if the crack goes right through the material mate

@danielprice7903 10 месяцев назад

I used to look forward to the weekend to go out on the lash, now I look forward to them coz I know there is a new welder fab vid coming out , my favourite channel by far , thanks guys keep up the good work

@welderfabber 10 месяцев назад

thanks dan

@ypaulbrown 10 месяцев назад

making me stay up all night here in the US watching your videos BAZ and Director.....cheers, Paul

@welderfabber 10 месяцев назад

Good lad Paul 🫶

@ypaulbrown 10 месяцев назад

@@welderfabber at 71 years old, I try to be....have a great day off on Sunday....Paul

@vinnypassmore5657 10 месяцев назад

Morning checks! Everything is broken on early morning checks, it's always raining and cold when those defect sheets are handed in lol...thanks for sharing have great weekend guys.

@welderfabber 10 месяцев назад

cheers vin

@Seanmountford 10 месяцев назад

Morning Baz really enjoying the machine repair videos and nice to meet the fox keep up the great work thanks Sean.

@welderfabber 10 месяцев назад

Thanks 👍

@markmawson1 10 месяцев назад

People only want to see the director because you have portrayed him like the Stig lol

@philmulrooney7020 10 месяцев назад

Baz is the best teacher👍but he’s a great student👌every days a school day and never forget it.

@welderfabber 10 месяцев назад

Thanks phil I'll be learning till the day I die

@stuartsmith7618 10 месяцев назад

Yep I reckon 50k subs to the channel and you and the director should do a live chat with both of you and the team in the workshop

@welderfabber 10 месяцев назад

50k is a long way a way we'll see, dont think director will partake thou

@snowflakemelter1172 9 месяцев назад

We use the pure nickel rods on cast iron boilers but we preheat and then only very short runs so the heat doesnt build up, gently gently is the way, then we cover with a fire blanket and leave to cool very slowly . Small parts is better to bury in dry sand and let cool overnight.

@jamesbarnes7802 10 месяцев назад

Baz your attention to safety is something that always impresses

@GrahamWP58 10 месяцев назад

Great Saturday video Baz plenty of different content already watched the dipper arm pin replacement. Looks like the Director is getting famous. Crack on lad to the next episode.

@welderfabber 10 месяцев назад

Thanks 👍

@tavspeed1101 7 месяцев назад

love your vids from your background exactly started off structurall steel then got into heavy maintenance,i know when plant breaks down has to be done bodged get it running whatever,dont forget the lads have a life will work weekends at the drop of a hat but have a family life as well

@edwinirwin6222 10 месяцев назад

Enjoyed video, all that crushing equipment is made in a 15 mile radius of me ,they must have all worked for finlay years ago

@14sgdpg82 10 месяцев назад

drill a hole at each end of the crack only 1/8 inch pin hole but will release alot of tension in the metal great vid , lukes a good lad top man baz n director

@welderfabber 10 месяцев назад

yup

@garrybeard7718 10 месяцев назад

Fantastic video baz. now how about introducing your team in full Fantastic video mate stay safe all. 👍👍👍🍺🍺🍺

@welderfabber 10 месяцев назад

haha garry they on the clock, you'll see more an more as we go

@Stillgotallmyfingers 10 месяцев назад

Looking forward to those screener legs working 🤙 Great video Baz & team 🤙

@somegeezer4840 10 месяцев назад

After getting out of the hospital, I need a good length Welder Fabber video to take my mind off things 🙂😄

@J4YJJ1 8 месяцев назад

Baz (Barry) ive been operating machines for 36i'sh years now an got to say your self an the director r a pure CLASS act love the content plz keep it up Thanks J

@trevorbennett4435 10 месяцев назад

13.04 Oreyt Shag, do you want me to watch you back LOL. You guys just get better and better. Wonderful to hear our northern accent and sayings in your content.

@partyrock247 10 месяцев назад

Feels good to come home from a week of working on machines, to watch other people work on machines 😁

@johnkinsella4802 10 месяцев назад

Well lad, that tank in QA440 is just a return manifold, the oil returns from various rams and motors return to that manufold and then 1 return line to return filter in hyd tank

@joggingmixlondon6895 9 месяцев назад

An excellent video. Congrats on your recognition Baz and congrats to Daniel and Fox too. Keep up the good work. Take Care🎉😊❤

@crazyedits50 10 месяцев назад

Morning pal thanks for another great installment in the lives of you and your crew. Things have come a long way since we were welding with gas. Luke is a decent lad you seem to have struck it lucky there . Hope you all have a good weekend and looking forward to tomorrows video 😊

@welderfabber 10 месяцев назад

Thanks pal, no episode/chapter tomorrow

@crazyedits50 10 месяцев назад

@@welderfabber ah ok pal no prob

@Herts1874 10 месяцев назад

We're is the Director. Brilliant 😂😂😂

@korzer 10 месяцев назад

I was laughing too, like he's Banksy or something.......

@abuubaydullah1 10 месяцев назад

Yet again more insight on how the gears turn with each other its amazing how they do and every video the Director misses nothing which in its self is a amazing feat to say how long he has been filming great content Baz as always most enjoyable everytime you make me feel asa if i'm there with you lads .

@charleynewell6604 10 месяцев назад

Brilliant video again lads keep it up

@pjaywils6073 10 месяцев назад

Love all the videos. Maybe cap off the hydraulic ports on the rotator before grinding and welding to stop shit getting into them ??

@JonDingle 10 месяцев назад

A great installment young man. When I have welded cast in the past, I use a high nickel content rod. Pre heat as you know, weld and peen with a needle scaler as I go and then wrap up to keep the weld area warm. As per usual, we see top work, top team and top content!

@tomganze7548 10 месяцев назад

Love the videos boz watching from across the pond i have driven and operated equipment for the last 37 years really enjoy seeing how its done in another country keep up the awesome work

@SuperTone35 10 месяцев назад

Best episode yet Baz. You cover a lot of interesting ground. Love the technical bit on the welding rods and then showing the application (and explaining it)👍. Video was produced at a good pace, always on the move, loads of interesting info.

@welderfabber 10 месяцев назад

Thanks 👍

@richardlyons7582 10 месяцев назад

Baz how many miles do you do in a week? Great show thought, Baz a new must watch channel for me and that mid week episode was a gem, hope it saves you plenty of money so you can get some more toys to work with.

@BrewPub 10 месяцев назад

Baz, this is now my favorite channel.

@welderfabber 10 месяцев назад

Cheers… thanks for watching

@mingthemerciless6855 10 месяцев назад

Baz you have a beautiful daughter and future Fabber! Like to see an episode with her laying down a bead. Cheers...

@J1M8O822 9 месяцев назад

Love this channel, it’s the only videos I never skip or fast forward, keep up the great content, as a HGV machanic for 25 years , I must say the plant job looks very interesting and rewarding

@welderfabber 9 месяцев назад

Thanks 👍

@J1M8O822 9 месяцев назад

Also the fact you are a Milwaukee fan makes the videos that much better, no offence struggler 😂

@MG-COFFEE 10 месяцев назад

Naughty boy Luke lol keep up the good work it's people like you who keep the country moving

@Blackopsmechanic338 10 месяцев назад

Another great start to the weekend. Excellent work. Peace

@ypaulbrown 10 месяцев назад

40:00 love the new Auto dark filter for camera work Director..... no green tinge.....BAZ did you right getting that filter...... cheers, Paul

@mathiaslewen1953 10 месяцев назад

I really like your channel. Quality content every time. It will be intresting to see the longterm function on the expanders. Also if you can find some bushing that has gone even longer down the out of shape path and see how it works!

@Georgiee.and.Dan. 10 месяцев назад

Fantastic way to start the weekend good morning baz n direct 👍👍👍👍

@matthewc.419 10 месяцев назад

" lil blue on the pull " !!!!!!!!🙈

@russjam121 10 месяцев назад

Morning baz and director. Its the weekend and welderfabber kicks it off 😊 perfect 👍

@jamiewall9076 10 месяцев назад

Another great video showcasing what you and the boys do, and an hour + long fantastic !

@welderfabber 10 месяцев назад

Next Saturdays is over a hour too.

@keithbrueton 10 месяцев назад

Super as always Baz and the team, Luke is getting really interesting now also

@jacobpace4716 10 месяцев назад

I reckon Baz left that gas on just quietly!

@MrPlumberguy23 10 месяцев назад

he knows that young man is in the hunt for a top job!

@randytravis3998 10 месяцев назад

Another great video .. when you pulled the cat walk with your truck the steps flexed // are they bolted on or welded ?? I thought they were going to pull off ..

@H20MPHTV 10 месяцев назад

Hey Baz, you can use a stainless rod to repair cast, I've used it to repair a cast exhaust manifold without an issue

@welderfabber 10 месяцев назад

Yes you can on an exhaust mate but not on that attachment, to risky.

@catabaticanabatic3800 10 месяцев назад

A brave move to attempt a weld repair on that. Immense stresses on that component.I would condemn that connector (?) and fit a new one. Good luck though, keep up the good work.

@welderfabber 10 месяцев назад

We'll keep a eye on it, should be OK.

@fredrickugarner8278 10 месяцев назад

A great taste of what goes on by a great leader and teacher

@hornetboy3694 10 месяцев назад

Awesome video, thank you baz & The director & the team.great work.. the casting could be SG IRON .we use to make jcb casting out of SG iron .at lister/Petter iron foundry .

@AnthonyB17 10 месяцев назад

Amazing great episode once again baz nice to see you and fuxy get some recognition it's well deserved to the welderfabber team and fox group 👊💪

@welderfabber 10 месяцев назад

Glad you enjoyed it

@TruckerMRB 10 месяцев назад

Enjoyed the video chap...Excellent

@adrianshjadesheehan9991 10 месяцев назад

Brillant video Baz the director is like the stig in top gear your shows are getting better and better all the time Baz great content and simple to understand everything well done baz

@welderfabber 10 месяцев назад

Thanks Adrian

@thelightofficial666 10 месяцев назад

" I just like to know I can still do it" Love ya Baz

@rangie999 10 месяцев назад

A TRULY FABBER-ULOUS Episode Baz Team Director. there seems an element of carelessness with the excuses of 'some -' the drivers should take care of and PRIDE to be driving Dream Wagons!.

@mistery00t29 10 месяцев назад

When are we gonna see Fox in high vis and a helmet around the yard? 😂

@jayd1974 10 месяцев назад

Great video and informative as always lads👍What weight do you carry in your van3.5 ton?

@welderfabber 10 месяцев назад

4.7 jay 5 max

@korzer 10 месяцев назад

Big up Director

@PP-kf1jx 10 месяцев назад

Another fantastic vid Baz & Director the drone footage is awesome you really do go to town with the content, the Fox seems a really nice guy as well and very grounded, say safe Paul P

@welderfabber 10 месяцев назад

thanks paul

@bryansmith3353 10 месяцев назад

Top quality content as ways

@harrycrowther3491 9 месяцев назад

class you baz so calm top guy

@welderfabber 9 месяцев назад

Cheers harry lad

@teeslunk 10 месяцев назад

Morning Baz.

@rossnolan2883 10 месяцев назад

Fantastic 😊😊😊😊

@raygreene73 6 месяцев назад

Have you ever barred or refuse to supply plant to company due to constant abuse towards machinery, i remember picking up a mini digger missing a track the contractor used it for a month without the track to avoid a call out charge ,the end repair bill was alot more than a call out charge for a track remount 😂😂😂😂

@noelkenny7504 10 месяцев назад

A top video as always Baz and team

@welderfabber 10 месяцев назад

Thanks 👍

@cengizsoker1195 10 месяцев назад

Mr.Baz 👌. ☕. From Cyprus 👏 👋

@Saki630 8 месяцев назад

good long video, i forgot to sleep. We like the Director. lol is it his channel?

@allenbrown7820 10 месяцев назад

Great video! I do have a request. Could you explain how the metal separator works on a screener the next time you are working on one? Thanks. Keep up the good work and Be Safe!

@welderfabber 10 месяцев назад

Its an magnet behind the belt but yeah I will allen

@allenbrown7820 10 месяцев назад

Thank You. Always interested in how things work. I was an agricultural mechanic (John Deere)several years and then went to work at a paper mill making liner board for cardboard boxes. Like you say “ Every day is a school day “ and still learning. Always enjoyed the service calls because it was something different daily. Y’all be good and stay safe.

@fredrickugarner8278 10 месяцев назад

Baz think about taking your work area that you have on your units that you and workers have you will have an all in one workstations start with one for each region. Do not cut back on the trucks you have for the men now you are a growing company.

@LewisHarvey-de7zv 2 месяца назад

Just wondered what that noise was woke eveeybody up while i went for a pis had door open noisy thing that laaa 🎉😂 arc air callum

@DennisHolland-e2v 6 месяцев назад

Did you do a. Video on making the dump truck rear body

@RichardArblaster 10 месяцев назад

38:27 is that the equivalent to Ashvilles "I don't know who did it Daniel" 😆😆😆

@welderfabber 10 месяцев назад

yes 100%

@richmiller7834 10 месяцев назад

I'd be pushing all of your lads to be wearing as much protective gear as possible. Eye protection when drilling for a start, kneepads as much as possible and gloves, especially when using oil and chemicals. I'm not a great fan of Health and Safety and lucky too have survived the risks I took in my younger days, but the old days of not bothering are gone, or should be.

@kristianskov4841 10 месяцев назад

Story from my work-life; I was using a drill press, drilling 15mm holes in some stainless square tube. The shavings must have somehow caught my gloves, and pulled me into the chuck and wrapped my fingers the wrong way round... Lesson learned (the truly hard way😐)... Never wear gloves near turning spinning things!!!

@raymccarthy7492 9 месяцев назад

Where did ye get those chocks under the tipper body Baz ?

@sheepdawg369 10 месяцев назад

🇮🇲❤️ yes baz the good old I.o.m foxes have invaded 😂

@matthewc.419 10 месяцев назад

@1.06.30 Could you have not put a block a wood under that foot thing on the steps .......be rite!!!

@paulusmarc 10 месяцев назад

Bon Boulo 👍👍

@CR_C30R 10 месяцев назад

Hi baz hope your well ! Quick question what drill bits do you recommend using ?

@iosilver9920 9 месяцев назад

Depends what you are drilling but I use HSCO (cobalt content) drills, mostly Dormer. Don't be tempted by ebay comedy drills that are coated. Speed and pressure is a factor especially if working with harder metals.

@CR_C30R 9 месяцев назад

@@iosilver9920 cheers mate

@manladuuu 10 месяцев назад

Any chance of a job baz I'm a fitter

@philiphuyton28 9 месяцев назад

lol sergeant major

@jasonbrooker9595 10 месяцев назад

More of the fox

@tavspeed1101 7 месяцев назад

hastelloy you know the crack

@MargaretBehan-lg1yy 10 месяцев назад

Wat a muppet.al he does is work for them

@welderfabber 10 месяцев назад

Troll on to another channel 🤡

@scotspie501douglas7 10 месяцев назад

great work but fox group dont like drilling without eye protection basic stuff

@MR-DREW-N.I 10 месяцев назад

Brilliant videos as per usual baz and team! But on another note is Wayne Rooney your son? Spit off him 😂😂

@welderfabber 10 месяцев назад

haha how old do u think I am!!!

@MR-DREW-N.I 10 месяцев назад

@@welderfabberhaha beats me mate not even gonna guess lol. Keep up the great content, enjoying the show more and more the chronicles/episodes go on ❤

@iTeChFrESh 10 месяцев назад

Great vid, keep them up. One thing that is coming across in your vids is that your quite rude with your suppliers when they’re trying to explain things to camera. I know your very busy and a bish bash bosh kind of guy, but won’t hurt to give them a bit more time and your full attention. I know your a nice guy but just thought I’d mention 👍🏻

@welderfabber 10 месяцев назад

Thanks fine but what you dont see is my phone is none stop all day always a problem, we dont stop cause I'm filming, and I am very good friends with most of my suppliers even more so the 1s we put on cam.

@MargaretBehan-lg1yy 10 месяцев назад

Wers t train u keep going on about