Thank you for a great couple of informative and entertaining videos on how to install the Bak Revolver X4S and your follow vid on installation tips and repairs you had to make. I ordered one for my 2024 Ford F250 Super Duty pickup and I'm sure I will benefit from your experiences.
Thanks for watching, commenting and the compliment! I enjoy making these videos and hope to help folks! Good luck and post back when your done, let me know how it goes.
Here’s a safety suggestion. Use a file or a Dremel with grinding stone to round off the corners of the rails. A friend of mine was loading the bed when his forearm caught the corner of the track and put a good size gash on his arm that required stitches.
Oh man, thanks for that tip. I'm sure it will help some including me. I'll take a look at doing that this weekend. Thanks for watching and stay tuned for more!
Congrats on your new truck! Also, check out my video about the infotainment system, that may be helpful as well. Thanks for watching. I hope all of my videos are helpful to people or at least a way to exchange ideas. Stay tuned!!!
Well done sir. Very articulate and well explained. Enjoy your new truck. I went with the new F150 and am currently looking for a bed cover. Appreciate the video.
Thanks, I appreciate it! I really enjoy making videos and sharing information. Trust me, if I didn't I would have quit months ago,. I appreciate you watching and stay tuned!
Brother, I just installed my Bak X4ts and squared it off down to the 16th, and I've been dealing with constant fitment issues. Your videos helped me address a few. I decided to measure each rail, and it turned out that they cut the right rail 1" shorter than the left. 😅 Bak will be sending me a replacement rail
Holy! An inch difference that’s crazy. I’m glad they are making it right but you would think they wouldn’t leave the factory that way. I’m glad my video was able to help, it’s part of why I do this. Thanks for watching and stay tuned!
I had an issue with the plastic on my ex's ram tailgate hitting the cover, as it had warped; initially I tried various shims, etc and sanding the plastic. new plastic solved it.. easy to find on amazon. Similar warping starting to show on my F150, but no problems yet with the cover
Had the same piece left side broken off on mine. Called Real Truck and they said they would send out 2 pairs. Great waited about 10 days and the package was dropped off by FedEx. Turned out the warehouse guys sent 4 pieces all for the passenger side. Called back and explained what happened and waited another two weeks for the next package of 2 pairs both left and right side. Bought the x4ts rails which they sell separately and been 2 weeks since I received the new rails with a completely opened box and no parts, end caps are missing from T slots. Received in a Saturday so called Real Truck Monday. That was 3 weeks ago and still no parts. Their customer service is great on the phone but getting stuff shipped has not been good. Will have to call again Monday really need the end caps.
All this is unfortunate…makes you wonder what’s going on where these items are stored. Hopefully your experience improves! I appreciate you watching and stay tuned for more!
Mine looks like crap 2 years in. Its torn up the top plastic on my tail gate and the cheap black paints come off on the side channels. I've given up trying to keep the cover clean too. Nothing works for longer then a month parking outside. Soon to be a $1200 paper weight in my garage. Side rubbers faded too. Doesn't matter what cleaner I've used its basically worn grey now. Have had to paint the clip holders 2X as well now . They faded white.......would honestly find a different cover for half the price preferably one from GM so they warranty the item .
Huh, thanks for commenting. I'm about 7 months and hope I don't have the same experience. If I do I will definitely seek a replacement but hate to at the cost of these things. Thanks for watching and stay tuned!
Awesome product I have one, I’ve had mine for 2 years and I got about a 2 inch slit on the top and now the tailgate end has come undone and I have to manually adjust it so it can close .
@@leeoscar83 huh, that kinda sucks. Out of curiosity I assume your truck is kept outside? Harsh weather at all (extremely hot or cold)? I am going to clean mine and use some protectant on it to hopefully prolong the life of the vinyl, we’ll see. Thanks for watching and stay tuned!
@@realdefense6139 how do powder coated rails turn silver? Unless Im washing my truck with acetone they lied about their manufacturing process. I've contacted warranty, hopefully my second unit holds up but the rails are sadly manufactured in India so I have my doubts. Hate paying top dollar for a sub par product.
Nice video my friend. How has it performed in heavy rains? Thanks for any info as I am trying to decide on a new cover for a 2024 Ford I have on order.
In heavy rain there is a minor amount of water in the bed afterwards. Very minor. The only things I store in the bed is my emergency tools and golf clubs. Neither is wet after the rain. I also installed the BedRug XLT Bed Mat for protection and separation from the bed floor. It also keeps my items out of any moisture. I shot a video about that as well and really paying attention long term. Thanks for watching and stay tuned!
Does moving the clamp up and down help tip rail. I know that is part of access covers method in their instructions? I have a X4s on the way so I have no experience....
Thanks for watching and commenting. So moving the clamp really didn’t help per se. What I have found is that the only time it hits is when I use the multi flex tailgate only which is not often. Overall I think you’ll really like it, I know I do.
@@GeoRides114 Thanks for response. I think the access covers have a taller grooved grip area so moving it up and down make a difference. Looking at your video it does not appear you have much room to do that. Not to mention I think the instructions mention clamping to at the top. Thank you again for video.
Perfect timing, both of mine broke when putting it up on the rails.. The piece you Put in the rolling part of the cover was the broken part still in there?
Love that you got something out of the video. For me the part that broke was the large rectangle cover. The pin and retaining clips were broken. The part that goes into the roll was fine, it’s a bulkier piece. Thanks for watching and stay tuned!!
I went out to glue my corner piece down , as a precaution. I found when I flipped the end over to apply some glue I found that they now have a screw in the underside where the "teeth" things are.
@GeoRides114 I just installed it yesterday. I am guessing Bak is attempting to remedy the issue of the corner pieces falling off. I believe the screw is to hold it to the other piece. I enjoyed your videos on the subject.
@@dooberoso good stuff. Glad they are addressing it in someway. Thanks for watching and commenting. I plan to do a follow up video of sorts soon since I have to clean and protect it (which I haven't done yet).
The exact same plastic corner piece broke during installation for me too. Replacement part is on its way. Seems like an obvious weak spot for such an otherwise well made cover.
Agreed, I’m not sure why they manufactured it that way but maybe their thought process is it has to have a weak point of some sort. Maybe their next edition will be better like they improved the X4. Thanks for watching and commenting!! Stay tuned for more!!
Seeing reviews that they come broken or with the rails diff lengths making the cover not fit the bed squarely. Did u have any quality control issues with urs when it arrived. (Aside from the broken corner cap). Great vid
Thanks, I appreciate you watching. I didn’t have any other quality issues with mine thank goodness. I think if it comes wrong BAK will make it right. Not what you want to do but their customer service was excellent. Thanks again and stay tuned!!
My right rail came out to be 1" shorter than the left. The back portion of the left rail was rivited incorrectly, causing it to be unsquare in relation to the front part of the rail resulting in me having to shim the back left rail out between the bed and rail by 5/16. I also had to shim the right rail in various areas so i could get the cover to be square with the lock engagement points. The installation took me all day, resulting in me having to remove and reinstall every numerous times. Never again. Oh yeah, and my clip broke off yesterday, and the bulkhead gasket they included shrunk, causing 3/8 gaps, which allowed a lot of yesterdays rain to get into the bed.
Hey reading all these issues makes me hesitant on a purchase. Plus one of vendors selling product isn’t helpful at all if there are issues. I purchased an item which was defective and they told me they couldn’t do anything.
@@josephpuchel6497 I really take issues that are shared online about products with a grain of salt in terms of how many people complain about them. I say that because most people will express negative feelings versus neutral and positive feelings/thoughts online. Example being my hate versus love video on my truck. Unfortunately, IMO, people are drawn quicker to negative behavior. Thst said, I would recommend the product, I ordered through Realtruck and they had great customer service. In the end, most products are a gamble. I say go for it! Thanks for watching and commenting!
I just had an X4s installed on my Ram 2500. After going through a car wash, it is NOT waterproof, water resistant, weatherproof or whatever vague statement that BAK claims. The more accurate statement is it leaks at the tailgate and the front of the bed, at least. Driving 70 mph in the rain will likely be the same water leaks.
@@captcol8335 I would agree with your statement for the most part. I didn’t have an expectation of it not allowing water in. For me it does a decent job of keeping the water out but we haven’t had much rain lately for me to gauge. Thanks for watching and commenting!
That's annoying for sure. Luckily, my cover isn't rubbing anymore, maybe it decided to act right once I broadcast that it was an issue. Thanks for watching and stay tuned!!
Thanks for watching, sometimes it makes it difficult to latch the cover in place. What I have found now after it being installed for a while is it only seems to hit when I'm closing the multifex tailgate. Something about that angle that is different than the regular tailgate.
@@noniespam it’s possible for sure. What I’ve found since is that it really only hits when I have the multiflex tailgate down only. Otherwise it seems to be fine.
For me, the broken corner piece was a minor issue. Had there been other structural problems I may have. It’s been great so far and the tailgate issue is no more. Can’t explain it but it clears with no problems. Thanks for watching and stay tuned!
