Ball Race to Knuckle Bearing | Fixed the "lagutok" in Honda XR 150L's steering | The Northern Riders

Подписаться 2,9 тыс.

Просмотров 25 тыс.

50% 1

Hi everyone! Welcome back to The Northern Riders channel.
Today's vlog is about one of the most common problem of HONDA XR 150L - bearing na lumalagutok sa bandang manibela. We converted the stock bearing, which is a ball race type bearing, to knuckle bearings.
Hopefully you guys learn something from this video. If you have any questions, do let us know in the comment section.
Please don't forget to like, share, and subscribe for more videos! Ride safe always!
Shopee link to Knuckle Bearing Set:
invol.co/clabv93
#Honda #motovlog #HondaPhilippines #HondaPH #HondaMotorcycles #LS2 #LS2Helmets #LS2Philippines #LS2HelmetsPhilippines #LS2HelmetPhilippines #LadyRider #LadyRiders #LadyRiderPhilippines #FilipinoRiders #bearing #bearings #steering
Please like/follow us on our Facebook page:
/ thenorthernriders
RU-vid channel:
/ thenorthernriders19
Music in this video:
Song: Ikson - Paradise (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Ikson - Paradise (Vlog...
Disclaimer: All products/parts shown in the video are NOT SPONSORED unless otherwise stated.

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 185

@ToppsKillz Год назад

Try using a flat piece like small wood block to install bearing races instead of metal to metal contact which can damage the race. Also using a flat wood will disperse the impact evenly and drive the race in evenly as well. You can see in your video where the race was slightly damaged from your extenstion. Definitly great advice to upgrade these bearings to tapered roller type. Great Video!

@TheNorthernRiders19 Год назад

Thank you!! And yes, we should have done that.

@donperez6549 2 года назад

Salute idol detalyado ang pag kakagawa...munting tip lng po mas safe po na pag lalapat sa uupuan ng bearing eh hardwood ang ipapatong at un ang papaluin para lumapat d nag kakaroon ng yupi ang pyesa...Godbless po

@TheNorthernRiders19 2 года назад

Thank you so much po!

@telcobilly Год назад

I just ordered this tapered bearing for my XR for the future when it's needed. Tapered roller bearings have been available for years as an upgrade. I'm sure it's cost that keeps the factory from putting them in..

@genalinemiguel1179 2 года назад

No.1 fan here🤩

@TheNorthernRiders19 2 года назад

Thank you, mother 🥰 The Northern Riders love you always ❤

@TheNorthernRiders19 2 месяца назад

Sa mga naghahanap po ng ball race knuckle bearing, PM nyo po ako sa FB page namin: facebook.com/thenorthernriders?mibextid=ZbWKwL BALL RACE - KNUCKLE BEARING TYPE New Rider Brand Compatible with: XR125 XR150 XR200

@romulosolayao4623 3 месяца назад

salamat tol,,,pwede magpatulong sayo...pareho lang na gagawin tol...quezon city ako

@TheNorthernRiders19 3 месяца назад

Sorry sir may work po ako e, malayo din po ako

@FPI23 2 года назад

Nice boss. Plano ko na din tlga mag DIY ng ball race sa xr ko.

@TheNorthernRiders19 2 года назад

Thank you! Hope this helps. Ride safe always!

@robertpostrero9365 2 года назад

Galing mo chowpi!!!

@TheNorthernRiders19 2 года назад

HAHAHAHA

@TagaSouthLand.R8 Год назад

The best way idol lagyan mo ng grease fitting ang leeg ng XR,kapag umalog bumbhan mo ng grasa using grease gun...

@uysilolovlog 5 месяцев назад

New friends lodi.. salamat sa mga vdeo mo. Naka xr150 din po ako.. ayan naka subscribe na. Shout out nman jan... hehehe

@TheNorthernRiders19 5 месяцев назад

Thank you po!

@ver9210 2 года назад

ganun lang pla. i aply koto sa xr ko. salam,at tolsa opag bahagi.keepsafe ride safe

@TheNorthernRiders19 2 года назад

Welcome po. Ride safe!

@alejandrovictor5236 2 года назад

Thank you boss.

@Rui-me5ew 2 года назад

1st!!! 💯

@TheNorthernRiders19 2 года назад

Yun o! 🤙

@lalaclemente1782 2 года назад

Wachaaap kariderrrr!

@TheNorthernRiders19 2 года назад

🤙🤙🤙🤙

@alejandrovictor5236 2 года назад

More videos sir. Thank you sa info new subscriber God bless sir.

@TheNorthernRiders19 2 года назад

Thank you po! Ride safe always 🤙

@TheNorthernRiders19 Год назад

SHOPEE LINK shope.ee/9zPbn4Uhl3 KNUCKLE BEARING FOR HONDA XR125, XR150, CRF250L, XR200, XLR200, OEM PARTS FROM THAILAND, 2PCS IN ONE PACK

@veysic1026 Год назад

Sir ask lng po san po makabili ng steering stem pin lock salamat po

@vincecatahan8316 Год назад

Ang cute ng kamay parang kikiam 😌

@TheNorthernRiders19 Год назад

HAHAHAHAH

@mikelim6356 2 года назад

Subbed! Great guide po! RS and God bless

@TheNorthernRiders19 2 года назад

Hey, thank you! You stay safe and ride safe always bro 🤙

@bertooodtv1268 2 года назад

🤙🤙🤙🤙

@TheNorthernRiders19 2 года назад

🤙🤙🤙🤙

@uysilolovlog 5 месяцев назад

Lods. Baka may maerekomend ka na inverted shock na swak sa xr150 ... mag upgrade ako.. hehehe.. salamat po lods..

@uysilolovlog 5 месяцев назад

Lods tanung pa.. swak ba ang mono xr200. Para sa xr150 natin..?

@arnoldsolivio1615 Год назад

Sir sa 198 na price ng bearing set na sya sir naideliver

@sanzit Год назад

Hi what bering is that you replaced the new one ? And your pro taper handle bar is nice which version is that?

@TheNorthernRiders19 Год назад

ball race to knuckle bearing. Handle bar is protaper fuzion

@binladenmohammad2193 2 года назад

Boss new subscriber nyo po☺️ ask kulang po ano po size ng knuckle bearing na pinalit nyo po, thank you po❤️

@TheNorthernRiders19 2 года назад

Thank you po for subscribing! Size po is 47x26x15, may link din po sa description ng vid na to kung saan kami bumili. Thank you and ride safe!

@rollygregorio3509 3 месяца назад

Boss mag-order sana ako ng knuckle bearing

@TheNorthernRiders19 2 месяца назад

PM po kayo sa page namin may available po kami 😊

@cogon22alup79 2 года назад

correct ka brod bagong bago ang xr ko lagutok na ewan factory defect cguro ng xr saan makabili ng bearing at anu ang kaparehas na sukat boss

@TheNorthernRiders19 2 года назад

Hello po, sa shopee lang po namin nabili yung knuckle bearing. Eto po link: invol.co/clabv93

@cogon22alup79 2 года назад

@@TheNorthernRiders19 ok thanks po

@TheNorthernRiders19 2 года назад

@Cogon22 Alup you are welcome po. Stay safe and ride safe 🤙

@andreivillanueva2024 День назад

Ano number ng knuckle bearing ng xr150 boss

@Shallenimation Год назад

What is the size of knuckle bearing?

@TheNorthernRiders19 Год назад

Please check the link i pinned

@Rawbeeaan Год назад

Hello sir. Kamusta yung performance nung bearing nato sir ngayon? Eto parin po ba gamit nyo?

@TheNorthernRiders19 Год назад

Yes until now po yan pa din at wala nang lagutok. Smooth ang manibela.

@Rawbeeaan Год назад

@@TheNorthernRiders19 okay po thank you! yan narin po bibilin ko for my xr mejo nananangay na sya eh. ridesafe!

@TheNorthernRiders19 Год назад

Welcome po. Ride safe always 🤙

@mayodose5879 Год назад

@@TheNorthernRiders19 sir pwede Po ba sa CRF 150 YONG knuckle bearing?

@TheNorthernRiders19 Год назад

Hindi po. Pang XR po yan size na yan

@raquelmanantan4438 Год назад

Anong number yong replacement bearing boss? At anong size socket para sa malaking nut?

@TheNorthernRiders19 Год назад

Nasa description po ng video yung link kung saan nabili yung product. Nasa video po ang size ng socket

@ricardoomac3857 Год назад

Ka XR 150 ano tawag yang pinalit mo bearing number size tbp.

@TheNorthernRiders19 Год назад

SHOPEE LINK shope.ee/9zPbn4Uhl3 Pa check nalang po dito. Dito ko nabili

@golf3242 Год назад

Gudpm..sir ano size uli ng knot sa manubela??30mm po ba??ty

@TheNorthernRiders19 Год назад

Alin po du sir? Allen kase dun

@golf3242 Год назад

@@TheNorthernRiders19 oks na sir, nagpalit ako ng knuckle bearing katulad ng sa inyu sir sa xr150 ko, bakit may lagutok pa rin??

@TheNorthernRiders19 Год назад

@@golf3242 check nyo po front shock nyo sir

@noelwing245 Год назад

Ganyan din problema ng xr ko paps

@TheNorthernRiders19 Год назад

Madami dami din ang may ganitong issue sa XR e.

@Gwapnitz_motoventure28. 2 года назад

anu ang link ng pinag bilhan mo ng knuckle bearing papz..? d kasi ma open ang link na posted mo. salamat..

@TheNorthernRiders19 2 года назад

Hello po. Ito po invol.co/clabv93

@JorzeTV Год назад

Boss kasama naba yan sa nukkle bearing ring na kinabit mo

@TheNorthernRiders19 Год назад

Ang alin ang kasama boss? Basta set ko nabili yan at pares na rin

@BAYAONKHEMS 4 месяца назад

Sir posible po bang mag lagotok parin kapag hindi nahigpitan ng maayos yung unang lock

@onechannel992 2 года назад

bago lang ako dito balak ko din palitan ng knuckle bearing xr ko 1year na sya. Ano tamang sukat po ang gamitin na knuckle bearing?

@TheNorthernRiders19 2 года назад

Size po is 47x26x15, may link din po sa description ng vid na to kung saan kami bumili. Thank you and ride safe!

@jaymarksalces4854 Год назад

Good day sir. Ano po ba ang papalitan pag medyo matigas at may kanto na sa manubela po? Salamat po sa sagot. Ball race ba tawag don o knuckle bearing?

@TheNorthernRiders19 Год назад

Ball race po yung stock, ang ipinalit ko po ay knuckle bearing

@marklyrics5073 2 года назад

Idol ask ko Lang bakit nagkakaiba yung rayos Doon Sa XR spokes?

@TheNorthernRiders19 2 года назад

Hello po. Magkaiba po talaga sila kase magkaiba ng size yung front and rear. Pero sa rear po magkakaiba din yung size ng spokes kase mas maliit po yung kelangang ilagay sa bandang brake drum nya. Ito po sizes na ginamit: front: 10g x 240 likod naman po 2 sizes: 10g x 172 and 10g x 184

@DIY-fk8ry Год назад

Sir ano pinagkaiba po ng stock na Manebela diyan sa bago mo po. Mas maganda po ba?

@TheNorthernRiders19 Год назад

Mas maganda po. Mas mahaba ng konti. At naka riser po so medyo mas mataas ng konti kesa sa stock

@eww_exotic465 11 месяцев назад

sir anong brand ng gulong mo sir?

@TheNorthernRiders19 11 месяцев назад

Dunlop geomax tires MX55 sir

@clydesantillan867 2 года назад

hello idol 1month palang po Xr150L ko tas mag konting libaong lumagutok po

@TheNorthernRiders19 2 года назад

Check nyo po yan vid. Check nyo din po suspension minsan sya ang mag lagutok.

@renevisca331 Год назад

boss anung size ng bearing n ipinalit mo salamat

@TheNorthernRiders19 Год назад

Dito yung size makita boss shope.ee/9zPbn4Uhl3

@randytungay9222 Год назад

Boss anu size ng knuckle bearing,salamat boss

@TheNorthernRiders19 Год назад

SHOPEE LINK shope.ee/9zPbn4Uhl3 Pa check nalang po dito. Dito ko nabili

@kevincarompitas1786 2 года назад

Sir pareho lang po ba ng size yung sa ilalim at ibabaw na knuckle bearing nya?

@TheNorthernRiders19 2 года назад

Opo sir. Pareho. Pares na namin nabili yan

@jubaibaliuding3947 2 года назад

Boss anong size or anong sasabihin kong sa shop nq bearing? Wla kc xr 150 shop dto sa probinsya

@TheNorthernRiders19 2 года назад

May shopee link po sa description kung saan kami umorder

@edwingalvejr.5671 2 года назад

hai sir...kumusta po yung pinalit nyo hindi na po bah lumalagotok?

@TheNorthernRiders19 2 года назад

Hindi na po sir. Walang lagutok.

@melvindechavez4389 Год назад

Boss..taga saan po kyo?kase ganun din po yung sakin na xr150L..preho ang ating problem sa manebela

@reydensalapeo847 Год назад

Sir ano po pangalan ng bearing na iki nabit ninyo sa xr niyo sir?

@TheNorthernRiders19 Год назад

Knuckle bearing

@PitoyLover 4 месяца назад

Yung batterfly Ng XR pwrde rin ba ikabet ss xrm?

@TheNorthernRiders19 3 месяца назад

Hindi ko alam kung compatible sir e

@alsuhudladjahali2087 2 года назад

Boss update naman kung til now ba ok parin yung knucle bearing na pinalit mo

@TheNorthernRiders19 2 года назад

Yes po ok na okay sir. Walang lagutok at based on my experience mas smooth po ang steering

@alsuhudladjahali2087 2 года назад

@@TheNorthernRiders19 thanks boss plano ko din mag buy gaya ng nabili mong bearing..

@TheNorthernRiders19 2 года назад

@@alsuhudladjahali2087 Nice. Ride safe sir.

@boytigbadlong9657 Год назад

Anong size ng bearing replacement mo sir sa taas at sa baba

@TheNorthernRiders19 Год назад

SHOPEE LINK shope.ee/9zPbn4Uhl3 KNUCKLE BEARING FOR HONDA XR125, XR150, CRF250L, XR200, XLR200, OEM PARTS FROM THAILAND, 2PCS IN ONE PACK

@harlygalaezcarcillar4063 2 года назад

Sir good morning po nag palit na ako ng Knukle bearing sa XR 150 ko bkit hndi parin nwala ung lagatok nag change oil narin ako sa schock nya...anu po ba mgandang sulosyon sir..thanks

@TheNorthernRiders19 2 года назад

Recheck nalang po sir yung shock at kung maayos naman po ang installation ng knuckle bearing, maaring sa shock po yan. Ako po kase pagkapalit ko ng knuckle bearing, wala na agad ang lagutok.

@edgardodelangelvasquez2214 2 года назад

Podría poner la medida del balero para poder saber cómo pedirlo gracias

@TheNorthernRiders19 2 года назад

Hi! The size of the bearings, if that is what you're asking, is 47 x 26 x 15. Or you may check it in this link: invol.co/clabv93

@edgardodelangelvasquez2214 2 года назад

@@TheNorthernRiders19 muchas gracias de hecho me puse a investigar y la medida específica del rodamiento es 32005-26

@TheNorthernRiders19 2 года назад

@@edgardodelangelvasquez2214 Thank you! You ride safe always, amigo 👌

@edgardodelangelvasquez2214 2 года назад

@@TheNorthernRiders19 gracias saludos y exelentes rutas👍👍👍

@supotman6014 Год назад

Boss hinigpitan nyo po b ng masyado yung lock?

@TheNorthernRiders19 Год назад

Saktong higpit lang boss

@rollygregorio3509 3 месяца назад

Magkano po sir yung knuckle bearing ganyan din kasi sa akin xr 150

@TheNorthernRiders19 3 месяца назад

sa shopee po, naka pin ang link sa comment section. wala pa sa 300 po yan sir

@jhongtv4092 2 года назад

Ganyan din xr ko idol lumagotok pag may humps..pag ganun kailangan naba palitan ng nuckel bearing idol?

@TheNorthernRiders19 2 года назад

Oo idol. Ngayon naman after kong napalitan, wala na yung lagutok. Check mo rin muna yung shocks mo baka yun yung lumalagutok.

@kirbyviray9978 2 года назад

Yung knuckle bearing na ginamit nyo po ba pwede rin siya sa XR 125?

@TheNorthernRiders19 2 года назад

Sir, may link po ng product sa description check mo. Nakalagay sa prod description pwede sya sa 125

@Bi_mentality 2 года назад

Sir Tanong lang po, anu po bang magandang brand ng knuckle bearing ang para sa xr150?ty po.

@TheNorthernRiders19 2 года назад

Hello po. Wala naman po specific para saakin. Pero yang ginamit po namin sa video ok naman sir. 100% fit sa uupuan nya and functional. Nasa description po yung shopee link kung saan namin binili 😊

@Bi_mentality 2 года назад

@@TheNorthernRiders19 maraming salamat po sir. God bless po.

@TheNorthernRiders19 2 года назад

@@Bi_mentality you are welcome. Ride safe always, sir!

@svienmoto0216 2 года назад

Lods ang tigas ipasok ang ibaba sa akin. Xr200 ang nabili ko. Same lang ba?

@TheNorthernRiders19 2 года назад

Same lang po yan, dahan dahanin lang sir paglagay

@ianjoeybarrios2089 Год назад

Sir ano po ang bearing number na pinalit mo? Salamat

@TheNorthernRiders19 Год назад

Dito yung size makita boss shope.ee/9zPbn4Uhl3

@oliverumerez5531 Год назад

bro iisa ba ang sukat nyan sa honda supremo 150

@TheNorthernRiders19 Год назад

SHOPEE LINK shope.ee/9zPbn4Uhl3 Pa check nalang po dito. Dito ko nabili

@jeanesacolminas8191 2 года назад

bai bat sa reply mo 45x26x15 sa isa mo namang reply 47x26x15 samay tinuod ana

@TheNorthernRiders19 2 года назад

Sorry Natypo po yata. 47x26x15 po yun. Check nyo link din sa shopee nasa description. Dun ako mismo bumili

@rexdogtong7504 Год назад

Idol size Ng bearing

@TheNorthernRiders19 Год назад

Dito yung size makita boss shope.ee/9zPbn4Uhl3

@neyney5469 Год назад

Anu size po na bearing kasya po sa xr150 etc.?

@TheNorthernRiders19 Год назад

SHOPEE LINK shope.ee/9zPbn4Uhl3 Pa check nalang po dito. Dito ko nabili

@andraeasia6634 2 года назад

yan po ba yung akala ko may maluwag o walang play yung suspension kahit bago kuha palang yung unit kapag nalubak o dumaan sa hums? sana mapansin tong post. salamat.

@TheNorthernRiders19 2 года назад

Hello yes po napapansin po namin lahat ng nagcocomment. Hehehe Check nyo po yun, saamin kase nakuha sa pagpapalit ng bearing. But also check other factors like yung suspensions. Sana po makatulong. Ride safe always!

@nardotv7065 11 месяцев назад

Boss pag nag order dalawa ba ?

@TheNorthernRiders19 11 месяцев назад

Opo. Dito po nabili shope.ee/6zsYzjSKix

@jaomap 2 года назад

kung sa shop master..magkano kaya aabutin nang labor?

@TheNorthernRiders19 2 года назад

Yun lang, no idea boss..

@evangelinesandoval6925 2 года назад

boss oversize ba mga gulong nyo likod at harap

@TheNorthernRiders19 2 года назад

Dunlop Geomax Tires na MX 51 and MX 53 po.

@TheNorthernRiders19 2 года назад

Wheelset upgrade vid here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--dDNEtrLWfA.html

@georgeaggarao4601 Год назад

anong # ng knucle bearing sir

@TheNorthernRiders19 Год назад

47x26x15

@rexdogtong7504 Год назад

Ano bearing#

@TheNorthernRiders19 Год назад

shope.ee/9zPbn4Uhl3 pacheck nalang po dito, dito po nabili yung mismong bearing na ginamit namin

@sarisarivlog8545 Месяц назад

Yong akin dol bago Ang bearing lumagotok parin ano kaya Ang nang yari do.on. I think many times what happened. New bearing but luamagutok parin?

@TheNorthernRiders19 27 дней назад

check din po sa monoshock

@morilianoluminding7335 2 года назад

bos ganyan din yung xr ko. saan ba makabili ng nakal bering

@TheNorthernRiders19 2 года назад

Hello boss! Sa shopee lang po namin nabili yung knuckle bearing. Check nyo po yung link ng pinagbilhan namin nasa description po ng video na to. Salamat po! RS

@prosperorizardo5845 Год назад

Magkano yang boss bili mo

@TheNorthernRiders19 Год назад

SHOPEE LINK shope.ee/9zPbn4Uhl3 Pa check nalang po dito. Dito ko nabili

@chunaco4235 2 года назад

ano po size knuckle bearing

@TheNorthernRiders19 2 года назад

Size po is 47x26x15 po.

@jonardibanez7414 2 года назад

Anong size ng bearing pinalit nyo boss

@TheNorthernRiders19 2 года назад

47x26x15 po

@juliusunajan599 2 года назад

NAKEL BEARING MAGKANO SAAN AKO MAKA BILI BROD.SALAMAT RPLY

@TheNorthernRiders19 2 года назад

Nasa description po ang link

@paostruction9455 2 года назад

boss magkano mo nabili yang kinabit mo sa gilid ng xr mo?

@TheNorthernRiders19 2 года назад

Alin po ba dyan sir? Hehe

@michaelsebuala1895 9 месяцев назад

yung xr ko kakapalit lng ng ballrace, after 1 month lagutok nanaman

@harilama8485 2 года назад

Does this fits in XTZ 150

@TheNorthernRiders19 2 года назад

Hi! I only know this is good for HONDA XR125, XR150, CRF250L, XR200, XLR200.

@nemziealvarado4477 Год назад

compatible ba sa CRF150L sir?

@TheNorthernRiders19 Год назад

Crf250l lang po sabi sa listing

@danmyrdatu1151 2 года назад

Kamusta po performance sir ?

@TheNorthernRiders19 2 года назад

Swabe sir. 💯

@danmyrdatu1151 2 года назад

Umorder po ako sir plug and play naman po wala naman babaguhin gayahin konalang po sa video nyo salamat ra lagi..

@TheNorthernRiders19 2 года назад

@@danmyrdatu1151 opo kung parehong pareho tayo ng unit, ganyan din lang po. Yung sa pagpapasok ng bearing kung pupukpukin nyo, patungan nyo ng pantay na kahoy para sa kahoy kayo magpukpok.

@cruiserstudio2688 2 года назад

Kahit pnalitan ng knuckle bearing after 5 months tumunog parin ung akin

@TheNorthernRiders19 2 года назад

Check nyo na din po yung front shock nyo.

@vino13gadgetsatbpa57 11 месяцев назад

Martiyo talga?

@TheNorthernRiders19 11 месяцев назад

Dapat po mallet kaso wala kami 😅

@arnelfajilan7233 2 года назад

Sir magkano po labor pag sayo ko po pagawa yung ganyan ko?

@TheNorthernRiders19 2 года назад

Hello! Message po kayo sa facebook page namin sir 😊

@ryanblanca2303 2 года назад

Sir anu po size ng bearing?

@TheNorthernRiders19 2 года назад

47x26x15 po sir

@babybossaeron530 2 года назад

Magkano po magagastos magpalit ng bearing?

@TheNorthernRiders19 2 года назад

Sa XR ko po, yung bearing lang ginastos ko since DIY sya. Ito po link nung knuckle bearing set: invol.co/clabv93 To be honest, no idea po sa cost ng labor kung shop ang gagawa