BANKS POWER INTERCOOLER PIPES INSTALLED ON MY 6.7 CUMMINS || MUCH NEEDED!!

Подписаться 39 тыс.

Просмотров 58 тыс.

50% 1

Thank You for watching I appreciate all of you! As always links are below for Products!! LIKE, COMMENT & SUBSCRIBE! Don't Forget to FOLLOW the Instagram Page for 24 hour updates!! CHECKOUT LINKS BELOW!!!
BANKS 2013-2018 6.7 CUMMINS INTERCOOLER PIPES- bankspower.com...
-FOLLOW CHANNEL INSTA@ / everythang_diesel
FOR CCS TUNING AND ANY DIRTY DIESEL CUSTOMS PARTS USE LINK BELOW! 7% OFF CCS TUNING AND 10% OFF DDC PRODUCTS! DISCOUNT AUTOMATICALLY APPLIED AT CHECKOUT.
www.dirtydiese...
WANT 10% OFF AMSOIL OIL PRODUCTS?! Call, Text or Email ADRIAN BARAJAS (760)525-7401 Or EMAIL Adrian@dieseloilguy.com .... MENTION EVERYTHANG DIESEL FOR DEAL. VISIT www.amsoil.com... FOR DIRECT LINK TO AMSOIL ONLINE AND TO REQUEST FREE CATALOG.
-MDC DIESEL $100 OFF ORDER "everythangdiesel" www.mdcdiesel.com
-JAM HANDLES 20% OFF ORDERS "everythang diesel" www.jamhandle.com
-BEANS DIESEL PRODUCTS 10% OFF ORDERS "BeanMachine10" www.bdpshop.com
**GET $100 OFF EVERY COMPLETE TURBO KIT OR DIRECT BOLT IN TURBO WITH MDC DIESEL! USE COUPON CODE "everythangdiesel" ALL ONE WORD OR CALL AND MENTION EVERYTHANG DIESEL 210-410-3931/ www.mdcdiesel.c...
FOR BUSINESS INQUIRY'S EMAIL Everythangdiesel@gmail.com
EZ Lift Tail Gate- amzn.to/3L7EIvr
6.7 Cummins CCV Bypass- amzn.to/3iqdSSR
5.9/6.7 Xotic Head Studs- amzn.to/36BgJpx
Adams Car wash soap- amzn.to/3NlLxLV
Beans Diesel Sump- amzn.to/3CYYkPx
Glowshift Gauges- amzn.to/3L0yldd
Fuel Rail Plug 6.7 Cummins- amzn.to/34ZblvK
Edge CTS3 Insight Monitor- amzn.to/3qpAS90
Banks iDash- amzn.to/3N9mCef
Banks Rear Diff Cover- amzn.to/3IxLN6C
Banks PEDAL MONSTER- amzn.to/3imy87Y
Cummins Oil Filter Plug/Cap- amzn.to/3iqYd5H
13-18 Revmax Thermostat bypass 68rfe- amzn.to/3D2yYju
68rfe Transmission filter KIT- amzn.to/3irkdxo
Flexible Metal Funnel- amzn.to/3NdSPRQ
Ram2500/3500 Diesel Fuel Cap- amzn.to/3udW6Yp
Adam's Graphene Ceramic Coating- amzn.to/3qnsYNa
Adam's Wheel Cleaner- amzn.to/3ueq4eZ
Adam's Graphene Detail Spray- amzn.to/3InF0fS
Adam's Tire Shine- amzn.to/36hVmcW
Fortin Evo Remote Start CHRT 5- amzn.to/3qkeX31

Авто/Мото

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 157

@anthonyguilian5203 Год назад

Just did the bank’s inter cooler and tubes, man you weren’t kidding that vasiline saved the day. Did the intercooler by myself that’s a work out getting the intercooler bracket bolts started why you hold the intercooler up in place. Thanks again great videos 🙏

@bryanezell3060 Год назад

Did you see a real performance from doing the intercooler upgrade? I was gonna do the pipes and intercooler but then thought of doing just the pipes.

@EVERYTHANGDIESEL 11 месяцев назад

Definitely is tricky holding the intercooler up haha and it's bigger too so yeah. Intercooler is definitely a good upgrade with the boost pipes

@flash8051 2 месяца назад

Yeah that thing is heavy...mine is still in the box, just arrived a couple days ago!

@TrevorCazes 2 месяца назад

this was hands down the most aggravating install i had on my truck i swear. ive had them on for 4 years now and dread taking them off to inspect.

@randonsoderstrom3647 Месяц назад

I did this to a 2011 (since it has been totaled). It took me longer to put the intake manifold/egr delete. Was involved in the installment than I thought.

@anthonyguilian5203 7 месяцев назад

It’s really to bad that banks can’t make those silcone boots a couple inches longer. The install would have gone much smoother . Thanks, great channel

@CentralCoastTactical95 Год назад

Okay okay! I see your USMC banner! CPL Arreola 15th MEU 2013-2017

@almedin7212 4 месяца назад

Brother you just saved my life, man I was killing my self until I watched your video and your advise about using Vaseline and pushing the boots all the way in, thank you man I owe you a bear or a few.

@flash8051 2 месяца назад

Just finished watching the install of the pipes and appreciated your comments and subscribed to the channel! 👍 My truck is basically a twin of yours (mine is a '15 Megacab... not sure if yours is). Even same color combo, but mine is a two tone with silver, not the beige color. It's not a Longhorn, just the regular Laramie, but mine has the Aisin trans and the rear air auto leveling which is fantastic! I have the Banks intercooler with the tubes sitting in the garage, as well as the Monster Hi Ram intake and heater grid delete kit. Also have the Banks Pedal Monster kit too... I may do the intercooler and tubes myself, but I will NOT be doing the Monster intake install...I watched the Banks video of the install (EXCELLENT) and it's way too complicated for my comfort zone and skills! Where did you get that upper radiator "hose"? What kind of intake is that? Gotta leave my exhaust pretty much stock (NOT deleted) here in Commiefornia. Plus I like it quiet for those looong trips towing my 5th wheel.

@zacarvold9825 Год назад

Great content and Thankyou. Next weekend im starting the Banks intercooler, boost tubes and intake elbow on my stock 2014. Should be good times. Thanks again.

@kadint4696 Год назад

Thanks for all the content bro! Really enjoy getting inspired by your mods and looking forward to doing the same to my 18.

@EVERYTHANGDIESEL Год назад

Really appreciate it bro!! And do it man it'll get you going on the truck haha

@mikeb6300 Год назад

Good video great idea to include on the Vaseline I agree with what you said I use it on all hoses I plan on replacing the inter cooler and tubes with Banks kit instead of just tubes for my 2017 6.7 Cummins.

@Richieq561 Год назад

These was a great mod and I went with the banks intercooler as well but now I’m wish I would have powdered coat my pipe lol

@EVERYTHANGDIESEL Год назад

U can even see them! There so deep down there haha I'm glad I didn't powder mine a different color

@AdorableDeplorable1 Год назад

Are you going to swap the Banks Monster Ram Intake Horn with the grid heater delete for the existing one? Also, is that a shot of you leaving Miramar?

@15w1ck3d03 Год назад

Does the Vaseline have to be Cocoa Butter or can it be regular? Just messin' with ya. Great video BTW... well be going off your tips. Thanks! Also noticed that road you're on... Miramar near the military base. Hope to see you around!

@EVERYTHANGDIESEL Год назад

Haha gotta have the coca butter lmao jk and sounds good say high if u ever see me!

@gslife1 10 месяцев назад

Damn it Camron, this the shit I love about RU-vid. 10 months ago I wasn’t thinking about this mod. Now I am, and lo and behold your video comes up. 10 years from now this info will still be great information. Happy Thanksgiving bro! 👊🏼

@larrybroberg4162 Год назад

I have them on my 18 ram and to get the oil filter out you will need to pull out your air box out ever time now

@nicklandrum1820 7 месяцев назад

The oil filter comes out the fender, the tubes don't change that

@Dynarider91 5 месяцев назад

You can always install an oil filter relocation kits.

@chriscollison3136 Год назад

I bought the monster elbow and both pipes kit along with the banks ram intake and the banks Automind2 programmer before I ever even drove my 06’ 5.9l that I had a engine built for! I bout the whole kit before I even had the engine ordered let alone installed! Now all powdered coated matte black but the smeding compound kit took out the intake!

@sirtito3 Год назад

Thanks for doing this video..now I know, and now I must do!

@EVERYTHANGDIESEL Год назад

Np!

@srgtkankles Год назад

Thanks for video bro! Definitely been wondering

@nicholasmoore5972 5 месяцев назад

I have a 24 ram 3500 dually and I installed the air intake and I left the box off and just have the filter there.

@GrantLylick 29 дней назад

Isn't Vaseline a petroleum product which would not play nice with rubber?

@austingreen7480 Год назад

BRO!! i love your videos and I value your opinion more than you know! I trust your videos and input so much! I do have a question! I’ve seen people remove or reroute the EGR/coolant hose and bracket that comes with the EGR kits ( just to clean the engine bay up) and was wondering what YOUR thoughts on this was on it?

@johnstark3058 Год назад

I am down...iam getting them, thanks for the vid.

@EVERYTHANGDIESEL Год назад

No worries man! Enjoy them!!

@spencersgarage 3 месяца назад

Can I have a link to the video where you did the intercooler and pipes on your 3rd gen?

@Rudedogg119 Год назад

Love your videos brother keep them Cummings... 💪🏾👍🏾💯

@EVERYTHANGDIESEL Год назад

absolutely!

@brandonb8698 Год назад

Yes definitely pull your fender liners and tires that will help a lot. And no you won't see them , there pretty tucked away , I recently just did the banks intercooler for my 16 2500 and yeah that's not a fun job .let's just say I will never do that again . The banks one is way bigger. It definitely was a nice upgrade though the stock one is very light and cheap. Stock intercooler is definitely undersized. Good buy , awesome content 👌

@EVERYTHANGDIESEL Год назад

I agree man 😂😂 my knuckles are busted the hell up but we'll worth it imo

@garyhogan7881 Год назад

Bro, you're in Cali-commi-fornia land, right?? Are they gonna start inspecting for compliance out there? I'm considering deleting my 2019 3500 5th gen and am a little worried about it. But I"m in Texas!

@mattnicholson1566 7 месяцев назад

Hey man just wondering if I can install these 3.5" tubes if i have a S&B cold air intake? Will it still fit?

@meeperrxp 16 дней назад

103% more than OEM

@timlafleur9860 Год назад

Im in the middle of this job right now. Its kicking my ass

@EVERYTHANGDIESEL Год назад

Haha it ain't easy lol it definitely sucks

@finleyatchison4158 Год назад

Do u have to do the full egr delete to put that intake manifold on ?

@chrisyoder8429 9 месяцев назад

Yes you do

@Christafa-ss3lu Месяц назад

Good job! The vaseline trick is a must. Have yo noticed any extra MPG's?

@Cumminsmcgee 5 месяцев назад

I been looking at some pipes but found some on eBay or spelab what you think

@48AZ191REUEKEA 5 месяцев назад

That roller coaster road repair was whack

@Twoods1102 10 месяцев назад

Do u happen to have a part number for the intercooler alone? And couplers? I already did the boost tubes on my 2018. Just can’t find the intercooler separate

@northernlightse3066 Месяц назад

I didn’t even know you had this truck. Love your stuff. Thanks 👍

@stevecastor4298 3 месяца назад

If boost tube comes off the turbo (Hot Side) How does Ram Air Tie in with it?

@call_out_kingz Год назад

My man said LUBE UP THAT PIPE lmfao.

@EVERYTHANGDIESEL Год назад

Ya heard! Lmao

@TheProchargedmopar Год назад

I think Josh over at Horsetorques Diesel (WOT motorsports) makes 1500+ hp with stock intake horn.

@EVERYTHANGDIESEL Год назад

Definitely can be done. People don't know the stock head can only take so much air in

@thgilne5060 2 месяца назад

True you can make 1500hp with the stock horn but with more fuel and more boost. With the banks horn you can achieve 1500hp with less fuel and boost. I put a 3.0L supercharger on my 5.7 and because of all of the supporting mods airflow was way superior than some other people build. They were at 7 lb of boost 700 horsepower and I'm making 700 horsepower with 5 lb of boost. More air less boost less fuel.

@TheProchargedmopar 2 месяца назад

@@thgilne5060 👍💪

@morrischoo9717 Месяц назад

@@thgilne5060Yes. Less boost, less heat, more air density, less parasitic loss, more durability. Worth the work.

@JC-dg1lh 11 месяцев назад

Have you noticed a difference in egts? I had just ordered pushers right before watching your vid.

@okjd159 Год назад

David Freiburger of Hot Rod magazine did test on headers which proved that dents on pipes don't effect efficiency of air flow, but larger pipes reduce back pressure which allows more air flow.

@lucasaurelius3416 Год назад

Did the test differentiate between NA, Superchargers, and Turbos? That could lead to drastically different results. Turbo diesels, from what i gather, respond quite differently vs gas.

@okjd159 Год назад

@@lucasaurelius3416 May I ask what your degree is?

@maddiearchuleta8303 9 месяцев назад

Do I need to tight the clamps on the pipe so the boot doesn't move? I'm having metal to metal

@SpencerA99 Год назад

Would you be worried about Vaseline ever getting into your engine? I know it's not probable, but it could still happen

@EVERYTHANGDIESEL Год назад

Naw im not. U not throwing a glob in your intercooler lmao. Just layer on the ends haha it's not that serious, the Vaseline is melted off after the first drive too.

@pp5237 Год назад

Check me on this but the petroleum in Vaseline would cause the rubber boots to deteriorate and possibly cause leaks, wouldn’t it?

@granthelman7905 3 месяца назад

Never use any lubricant when putting pipes into boots , Banks does a video on how to install, they clearly state this , but go ahead if you want them to blow off!

@DanPark68 Год назад

Where did u get that speedo face? Lookin good man

@EVERYTHANGDIESEL Год назад

It comes with laramie long horn trucks lol

@dannywon148 6 месяцев назад

How come no intercooler swap? Thanks for the content

@mikeyncali Год назад

Yeah my tubes are popping off with the vaseline maybe I out too much but getting it out is a bitch. And that rubber tubing on the passenger side down at the inner cooler os really short it’s the one that keeps pooping

@EVERYTHANGDIESEL Год назад

Gotta make sure them clamps a super tight. I never had one pop off from the Vaseline.

@manuelgonzalez1652 8 месяцев назад

They look nice! Do you need to drain the coolant or anything like that to install those?

@leonardcusumano3524 6 месяцев назад

How many miles on that good looking truck

@RyanForry Год назад

Did you have trouble getting the oil filter out the wheel well like you would do with stock boost tubes? I did the boost tubes on my 17 ram and now it seems like the only way to change the oil filter is to remove the intake or boost tube. Curious if you encountered the same thing or if I possibly screwed something up on my install.

@EVERYTHANGDIESEL Год назад

No I had the same issue when I tried changing my oil few weeks ago. 🙃 they make oil filter relocation kits that I'm looking into.

@johnfreitag4044 Год назад

This is a kick ass video. This will be my first mod on my 2017 6.7L cummins . Thank you

@mickeyreefer4212 Год назад

Do you think you can still get the oil filter out, though the fender. Like stock

@EVERYTHANGDIESEL Год назад

U can just a little more tricky. I got something coming up to address that soon!

@dextermay4007 10 месяцев назад

On my 2016 6.7 it is much easier to remove cold air intake and replace oil filter from the top.

@kirkmorgan3999 Год назад

Love the content keep it up ! Much appreciated

@EVERYTHANGDIESEL Год назад

Appetite bro!!

@jesseedmonds1015 Год назад

Great video. Not looking forward to doing the job now after seeing all the disassembly required. What kind of intake are you running?

@EVERYTHANGDIESEL Год назад

Intake was just a generic ebay horn.

@greenzeke941 Год назад

I’m really enjoying the content my man!

@EVERYTHANGDIESEL Год назад

Appreciate it a lot thank u!

@familyschoice 7 месяцев назад

where did you get the pod cluster in pillar

@paul91103 Год назад

Nice mod and video. Semper Fidelis, and Merry Christmas. You stationed at Miramar MCAS?

@EVERYTHANGDIESEL Год назад

Yessir

@erikkekkonen2941 Год назад

Great little vid Camron !!! Hey ? for you !!! Are you still running the peddle monster ?? If not why ?? And if you are what's your take on it after you have ran it for a bit !!!

@EVERYTHANGDIESEL Год назад

Pedal monster is a good mod, and I do run it still

@jeffparkert.k.askillet5085 Год назад

Solid video homes keep it up....✊🏿✊🏿✊🏿

@ashleybaker3789 Год назад

Thanks for all your content, brother! I have a 2015 2500 Laramie Longhorn. Have you thought about adding a coolant bypass for the rear thermostat? What's your thoughts?

@EVERYTHANGDIESEL 11 месяцев назад

Thank you and I have it's just a bitch to install. Haven't done it yet

@user-ym9wb2mk5e Год назад

Did you have to retune?

@EVERYTHANGDIESEL Год назад

No not required

@wildmanofthewynooch7028 Год назад

Love to know what it does for the fuel effency

@Balakay9435 Год назад

Hell Yeah Brother 🇺🇸🦅

@EVERYTHANGDIESEL Год назад

💯🙌🏾

@DOC6.7 11 месяцев назад

Good vid, thanks for making it!

@davidvander2233 Месяц назад

like the energy dude

@donc9275 Год назад

You’re gonna need some more red stuff to brighten up your motor. Great tutorial

@EVERYTHANGDIESEL Год назад

That's the plan!

@whitelightning6.7 Год назад

I think when I do mine. I am going to try to wrap them in kitchen plastic wrap. Maybe that will protect them, until they are completely installed. Thanks for posting!

@EVERYTHANGDIESEL Год назад

Save the wrap bro it won't haha. They actually didn't get scratched bad installing tbh. But once your done and installed you won't even see them. Tbh I would just do raw uncoated pipes.

@whitelightning6.7 Год назад

@@EVERYTHANGDIESEL Copy that

@bobmcalister2131 Год назад

Great Videos Dude!! I’ve got 2012 6 speed 4x4 bought it new and starting to do some mods, the fuel rail plus.. that’s a must in ur book ? No problem with that?

@EVERYTHANGDIESEL Год назад

Tbh unless u running higher than stock rail pressure it's not required. The stock rail plug is 24k psi when it opens. If u getting low rail pressure codes then a rail plug will help

@bobmcalister2131 Год назад

Good deal ! Thx Merry Christmas!

@EVERYTHANGDIESEL Год назад

Merry Christmas!

@grant_6.7_5th_gen Год назад

Yess Sir!! Merry Christmas to you and the family Cam

@EVERYTHANGDIESEL Год назад

Thank you bro merry Christmas to you n your family.

@sixty7maro991 Год назад

That hot pipe fit better than my pusher we installed? We went to war installing the pusher lol.

@sixty7maro991 Год назад

Nvm, I just got to the part in the vid where you explained it lmao 🤣

@EVERYTHANGDIESEL Год назад

Oh yea bro it still sucked lmao

@herculesinwyoming Год назад

Man I knew that was a tough job

@marlonhernandez706 Год назад

Did you notice any performance or mpg improvements?

@EVERYTHANGDIESEL Год назад

Yes I did, better throttle response and slight mpg gain like .5mpg

@marlonhernandez706 Год назад

Thank you for the reply, by the way I was DI on the west coast. Semper Fidelis!

@bbrcummins1984 Год назад

Go NOLES.

@blakeking1481 Год назад

Great mod I've done this to my 14 ram as well

@EVERYTHANGDIESEL Год назад

I agree man, definitely a good mod

@nasty661ss 11 месяцев назад

Will the Vaseline degrade the coupler material prematurely?

@EVERYTHANGDIESEL 11 месяцев назад

Not at all. The Vaseline is gone after the first few heat cycles

@mikeloomis2091 10 месяцев назад

No banks Monster Ram?

@EVERYTHANGDIESEL 10 месяцев назад

Got one installing soon

@Mr.WS6 Год назад

These fit with stock air boxes?

@EVERYTHANGDIESEL Год назад

They don't connect to your airbox. But to answer your question yes

@GaryBlankenship96b40 Год назад

I added these and discovered i could not remove oil filter threw factory designed opening anymore

@EVERYTHANGDIESEL Год назад

I can see that considering it was already a tight fit before to remove the oil filter

@GaryBlankenship96b40 Год назад

@EVERYTHANG DIESEL i bought a oli filter relocation kit from pacbrake but havent installed yet

@EVERYTHANGDIESEL Год назад

Thats a smart move! I might have to looking one of those

@AdorableDeplorable1 Год назад

I installed them on my 2014 and can still remove the oil filter through the fender well.

@gilbertgonzalez2167 Год назад

I have that same setup on on my 4th gen but with a CSF intercooler definitely woke it up and made the turbo sound louder I am running a WC Fab air intake

@EVERYTHANGDIESEL Год назад

Hell yea . I'll definitely do the intercooler in the near future. It does make a difference

@kadint4696 Год назад

How long has your csf intercooler been installed? I'm wondering how it performs and if it has more volume than stock. I noticed mishimoto intercoolers are the same price as banks now.

@gilbertgonzalez2167 Год назад

@@kadint4696 it’s a little bigger than stock and I’ve had it on for about a year now takes a little longer to spool up but the power increase is definitely noticeable I am also running a banks monster ram intake horn

@kadint4696 Год назад

@@gilbertgonzalez2167 Thanks man! I wonder if they all cause a little spool lag due to the increase in volume

@sbjennings99 10 месяцев назад

I love your content...

@EVERYTHANGDIESEL 10 месяцев назад

Thank you man! I appreciate it!

@ericsteele1678 5 месяцев назад

Ya not to impressed with these as well can’t get the oil filter out and the one form the intercooler to the intake does not fit right doesn’t go in all the way blew off the other day and can’t pull it up due to the power steering reservoir hose rubs so who goes good for that once it chafes through the hose needs to come out feather to the intake than bend up straight into the intake

@kyledavidson1824 Год назад

Just spit on it.......lmao

@EVERYTHANGDIESEL Год назад

Lmaoo ya heard 🤣🤣

@blownbird97 Год назад

👍

@genesamuels4507 Год назад

Good ol’ Vaseline.

@EVERYTHANGDIESEL Год назад

😂😂 ikr!

@georgec6228 Год назад

A lot of these upgrades are only useful if you're making tons of power above stock the stock ram air box is good to 500hp and I'm going to guess that the stock tubes with the dent work fine for stock and mold upgrades and that you will see nothing from the install . You were fine with that dented pusher intake on the 08 but can't live with the factory dented tube that no one can see when everyone could see the dented intake ???

@Formerlywarmer Год назад

😂 👍👍

@toddjcole6935 Год назад

I put a set on my 07.5 6.7 along with the Monster Ram Intake. I was fortunate that I could put the Boost Tubes in through the top. Yours looks like a pain in the you know what, you did a good job. I like your videos, they've helped me with a few mods I've done. Head Studs are next this coming summer when the weather gets better, I'm thinking of doing the PPE Dual CP3 next along with the head studs. Keep up the videos.

@EVERYTHANGDIESEL Год назад

All those are good mods! Yea doing head studs in the cold aint it I've done it before haha I got xotic Head Studs on my truck and love them! No issues and excellent price. Yea if I was replacing the manifold I would've just came from the top haha it was super bad tho

@joshcox8475 8 месяцев назад

1k likes and im 1000!

@TheIncredibleHoosier Год назад

Bro you should have powder coated the pipes. You’re gonna regret it.

@871jamie Год назад

For close to 500 bucks what little gain you might get and the difficulty involved, it’s not worth it! Banks is ripping people off for simply bending some tubing and giving you two couplers. Just my outlook though.