Baratza Sette Grinder isn't grinding (Baratza Repair) 

Thank you. Reattached the loose cable fixed my Sette 30.

Thank you, you are a legend you vid saved me 2-3 weeks buying coffees and the cost of the gearbox which i though was my issue.

I haven't used my grinder in months and you just fixed it thank you!!

Thank you. After a year of drinking instant coffee, I have decided to try another attempt to fix my barazza, and your video was a blessing. Thanks again!

Thanks my good sir, you saved my morning coffee.

Super helpful video, thank you! I just ground some light roasted beans for use with an E&B basket that requires super fine grind size, so I used almost the finest setting (1B), and this is with my 270Wi already installed with a couple of shims. The grinder stopped working after straining to grind only 4 grams and I thought I might have just killed the motor. 10 minutes later I find this video, and it turns out that with all the vibration the hopper (an aftermarket single-dose one) probably just got loose. I reseated it, and voila, my grinder is working again!

Great video, you saved my mornings!!!! The metal scoop clip was bent just enough to where it would not click when the burr was installed. Thank you so much👍🏻👍🏻👍🏻

Worked like a charm! Thank you!

Wow thanks! I only knew about the hopper interlock, and totally missed the burr interlock which was broken. Your video saved me $400, I already had a new grinder on order from Amazon. Those are not relays, they are just micro switches. I just cut the wires to the switch that was broken in the burr selector area you pointed ut, (white and brown wires), and soldered them together, bypassing the switch altogether. Why would anyone put interlocks on the hopper and burr anyway? Stupid design. Thanks again for the video!

Great tips- works again😄 Thx!

Thanks! Helped me a lot!

Honestly, for me it was just making sure it's locked. 10 second fix -thanks!

Thank you very much 👍 saudi arabia

Thank you!

Those aren't relays, they are micro switches. If you disconnect both wires you can test the switch by checking continuity across the terminals of the micro switch. The switch should "read" closed when the hopper is in place and rotated to the proper position and "open" when it is not.. If the switch doesn't change with the position of the hopper it's time to replace the switch.

I bought a Sette 30. After using for half a month, took the burr down and cleaned it. Reattached it, it wasn't grinding. Watched the trouble shooting Baratza videos many times and followed their action. Still failed to grind. Have to return for warranty repair. I haven't get it back yet. One question is could we bypass these microswitches.

Thanks! Any suggestion for the following problem? The machine starts grinding but immediately the grinder is jammed with beans and is stuck.

I got a baratza sette 270, and this morning started making loud noise when grinding, and very little coffee coming out. Any ideea what can be?

Tried everything I could think of so far, without luck. Checked the wires, checked the hopper activates the switch, checked the micro adjuster and that clicks as well. Anyone have any other suggestions? I also checked all the circuit boards for failures and blackened areas, but everything is in pristine condition. Cheers

I am at you stage mate. Timer is going, wires are good, but no grinding. Have you solved the issue?