Bash! Break Slipper Clutch! DIY Fix! Bash Some More!!!!🍻⚙️🔩🔧🏎🤷‍♂️😂

Подписаться 2,6 тыс.

Просмотров 6 тыс.

50% 1

Bash the Senton until slipper clutch got loose. Try to tighten the screw but ended up breaking the clutch plate. Did a Micky Mouse 🐭 job and it’s up and running again with too much grab. I need to fine tune the adjustment on the slipper. Thanks for watching! Like, Subscribe, Stay Safe, and Cheers!!!🍻
Here's more info on the Truck and Specs:
www.arrma-rc.com/4x4/blx/senton/
#Arrma Senton V3 #arrma tough #Arrma Short Course Truck #1/10 scale

Хобби

Опубликовано:

6 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@carscoffee5263 2 года назад

Pretty dope mod dude!

@Evan-rq2ee 2 года назад

hey ive got the senton with granite tires and my slipper is broken, but what did you use to clean the truck? mine is faded from dirt and clay

@ItsRCTeng 2 года назад

Disinfectant wipes and simple green dilute in water. After the clean I use wd40 to coat the truck for a nice clean shine.

@Evan-rq2ee 2 года назад

@@ItsRCTeng yeah, the wd40 works like crazy, is it safe for the parts or is it only the plastic? It works really well

@ItsRCTeng 2 года назад

It’s safe for all parts of the truck. It’s known to make the plastic on any rc car more flexible so it don’t break as easily.

@bra1nc417d 2 года назад

Man, rocks get stuck in the steering, ALL the time. Its one of the faults against the entire 3s line. My Typhon, Senton and Granite ALL do the exact same shit. It gets annoying, but really, not a big deal. Something that a V4 should work out, though.

@ItsRCTeng 2 года назад

Same here it always happens

@RayRiv73 2 года назад

The manual says to losen the slipper 1.5 turns from full tight. Did you do that when you unboxed it by any chance?

@ItsRCTeng 2 года назад

Yea it still slips. The clutch plate is way too weak. I found that the diy method i did had better results then the stock clutch. I don’t get any more slipping and it still holding up til now.

@andreasbrandstetter9221 3 года назад

How long did the tiny metal hold up? 1 battery?

@ItsRCTeng 3 года назад

Nope! I ran packs after packs in it so far It still holding up strong. As long as the metal is strong like a thick washer, it will hold the pressure on the clutch.

@MightyistheRCGamer 3 года назад

You might want to buy the slipper pad one day. Just to be safe

@ItsRCTeng 3 года назад

I am going to buy and replace the whole slipper unit with the original part later in the future. This is just temporary for now. 👍

@MJ-gq9nv 2 года назад

Tough revin sob it iz

@tonyynot484 3 года назад

How do you clean your rc after running through the dust?

@ItsRCTeng 3 года назад

I use the garden hoes to spray it down but don’t over spray the electronics just enough to soak the whole truck then I flip it upside down and let all the water run off and dry. Then you MUST take out all the bearings and lube it. After all is completely dry. I spray WD-40 to give it a shiny clean look. It also help with making the plastic more durable. 👍🍻

@RayRiv73 2 года назад

@@ItsRCTeng only wheel bearings or gear bearings also?

@ItsRCTeng 2 года назад

Anything that has a bearing gets lubed. I use hopper 9 which is an oil made for oiling gun parts. Sounds weird but it works great on lubing bearings. Don’t use wd-40 beucase it’s a degreaser and it’ll dry up the bearings. I only use wd-40 on the plastics of the rc car to keep it clean.

@B0tinh0 3 года назад

Nice temporary fix there.... I just got my big rock and after 4 or 5 bateries ...spur is gone so I think I'll have to drill out the chassis like yours. Has the hole in the chassis worked ok for you?

@ItsRCTeng 3 года назад

Yeah it helps with keeping out all those fine dust that build up when there is no vent or ports for the dust to escape. Those fine dust makes the plastic gear wear out faster too. I usually open up the power module after a few runs and brush everything off with a hand brush or good size paint brush. 👍🍻

@MJ-gq9nv 2 года назад

No no@No no just some tape bubble /$excelent

@TheTylerjoy04 Год назад

So How Many Runs Did You Have Before You Had To Buy Original Parts? My Slipper Clutch Just Gave Out Yesterday & The Nearest Hobby Shop Is About 45min Drive..😢 Just Want A Temporary Fix.. Till I'm That Side Of Town To Buy Parts..

@ItsRCTeng Год назад

I’ve been running this truck ever since with the same DIY clutch. Still holding up strong. I’m am convinced after these past couple years that this DIY clutch is soooo much better then the original thin flimsy clutch. You don’t have to take my word for it.

@TheTylerjoy04 Год назад

@@ItsRCTeng Ooooh WOW! That's Really GOOD To Know!! Thanks Man I Really Appreciate..! 🤙😊🤙

@tristanbergsma1003 2 года назад

I was riding and my car maden a very high noise and then my spur gear was fully stript anyone knows what is wrong?? Not very goor english so i hope i Said it right ahah

@ItsRCTeng 2 года назад

Your slipper adjustment maybe too tight. Also, if your gears are not mesh properly that can strip the gears too.

@tristanbergsma1003 2 года назад

@@ItsRCTeng i already found it my slipper clutch was slipping and totally burnt everything. it was loose Bud thanks for your reaction!!😊