Basic Electrical Troubleshooting 

noobie here and this is the way it should be. theory doesn't work for me if I don't tinker with it first, it makes the process more enjoyable and you often have that "Eureka" moment when it all clicks in your head and there's no feeling like it

Great Video! Forgive me for the intrusion, I am interested in your initial thoughts. Have you researched - Tarbbatigan clean errors Tip (do a search on google)? It is a smashing one off product for discovering how to fix electronic devices without the hard work. Ive heard some extraordinary things about it and my friend Sam after many years got cool success with it.

Thanks for the Video! Apologies for butting in, I am interested in your thoughts. Have you thought about - Tarbbatigan clean errors Tip (search on google)? It is an awesome one of a kind guide for discovering how to fix electronic devices without the hard work. Ive heard some extraordinary things about it and my m8 at very last got cool results with it.

Thanks for watching.

Thank you my friend!

Thank you!

If it is just line 1 and the white wire it is the identified. If it is line 1, line 2 and a white common to both it is the identified neutral. The term identified means it is "identified as the grounded conductor" by being white or natural gray.

Nice Video! Forgive me for butting in, I would appreciate your thoughts. Have you researched - Tarbbatigan clean errors Tip (erm, check it on google should be there)? It is a good one off product for discovering how to fix electronic devices without the hard work. Ive heard some interesting things about it and my friend Sam at last got amazing success with it.

Excellent video content! Excuse me for chiming in, I am interested in your initial thoughts. Have you researched - Tarbbatigan clean errors Tip (erm, check it on google should be there)? It is an awesome one off guide for discovering how to fix electronic devices minus the headache. Ive heard some interesting things about it and my work buddy after a lifetime of fighting got amazing results with it.

There are many analogies to explain why this occurs, but the easiest is to think about potential difference. One side of the open switch is connected to one polarity at the source, and the other side is connected to the load, but with no current flow the load would not have a voltage dropped across it. At this point, the maximum potential difference would exist across the switch. To answer your second question, when the switch is closed, the load is now connected, and opposing current to the level inversely proportional to it's resistance. If it was just a switch connected to a supply with no load, then yes it would short circuit because the circuit would have zero, or almost no resistance/impedance, and current would be very high.

If the switch being metered is in parallel with a closed switch, it will not read a voltage as both sides of the switch would have the same potential due to the closed switch. If a single switch is open, and the load is removed, then there is also no potential across the switch as the wire between the switch and the load is essentially like waving the meter lead in the air as it isn't connected to anything at that point. Let me know if this helps clarify!

😂

Cheers for the Video clip! Excuse me for butting in, I would love your opinion. Have you thought about - Tarbbatigan clean errors Tip (probably on Google)? It is a smashing exclusive product for discovering how to fix electronic devices minus the normal expense. Ive heard some pretty good things about it and my m8 at last got cool results with it.

There isn't 120 on both sides, there is a potential of 120 across the lamp from the supply. I'm not sure how you mean 120 on both sides.

It would be considered the grounded conductor. Not to be confused with the ground wire itself, out the bonding conductor. Often referred to as a neutral, but in this case it is not truly a neutral, but the conductor "identified" as grounded. To simplify.... The white wire.

schulerruler Thank you very much.

Across a switch in series with a load it will read zero. Test it out. Always good to check what your unsure of.

You can email directly if you like schulerruler@gmail.com

Sorry for the low sound. I have since been editing sound levels to ensure this does not happen.

You may want to adjust your volume. By adjusting the volume levels, you can make videos, or songs, or podcasts quieter or louder depending on your needs. Consult your user manual for whatever device it is you are listening on to find the location of the volume adjustment buttons. Sometimes it's a dial, or it may be a push button. Thanks for watching and commenting.

I can hear it just fine. Maybe he needs new batteries in his hearing aids

Nope, I am having difficulty hearing him too.......all volumes turned up.

It was a new microphone and the settings were set to low. Have since corrected the issue.