Basic Q -Jet Tutorial part 2 - Basic Troubleshooting: Flooding symptoms - Cad Company 

Excellent videos. Straight and to the point. More USEFUL INFO here in 3 minutes than in over an hour elsewhere. Thank you.

Thank you for your tips I've been doing quadrajets for over 20 years and yet I have to learn evidently thank you for your time

The tip on the sticking float worked great thanks

Two excellent tips, thanks! And the explanation is clear and easy to understand, well done.

Vaccuum is sooo important on these things! The thermostat housing has a vacuum switch attached to it that activates all the ported vacuum on the carb. I have 4 tubes on mine. I think this should be brought out on more of these online videos. This little mechanism MUST BE in good working order. 🐈

Thanks for you tips. Regards from SA

Thanks for the vid. That peace of cardboard solved my problem!!!

Hey yeah I have been working on quadrajet for about 30 years and if flooding at start up and running it's because your float is out of adjustment.

i take the little spring out of the fuel filter inlet. if that sticks closed, can crank a battery dead trying to start after a long time parked. don't forget the spring and check valve behind the filter when installing it back on. It's that little valve that sometimes causes hard starting.

Ok have quick question, when my Rochester verijet two barrel is running when looking down past the choke valve the center ring is letting fuel run out and fuel mixing needle does not let me adjust it why is it doing this. Checked the float but no change.

What if after a couple days of not driving you have to put can in carb to start it?

Gas is coming out of the vent hole where the power piston is

thanks for the info about the float!!! great video!1

I have one in my truck and if it sits for more than a day it is hard to start have to pump like crazy runs fine when it gets going and seems to hold fuel for a day and then it’s like it’s not primed or something any ideas

Good video 👍👍

My quadrajet has sat for awhile. It wont start when you pump the gas and try to start it cold. But when I pour fuel in the carb it starts right up and idles good. Could you tell me what I should look for?

How do you do this on a rochester 2g??

Thanks

Hello i need your help please...im putting a quadrajet carb ( number 17085586 ) on a 3.9 liter range rover classic engine and i need an electric fuel pump for it..can you maybe guide me to an electric fuel pump option ? Thank you in advance for all of you

Thanks!

La verdad que entre los autos a carburador o inyección me quedo con el carburador