Basic Swimming Pool Features and Plumbing Walkthrough with Justin Bowie of JMax

Подписаться 2,2 тыс.

Просмотров 114 тыс.

50% 1

Justin Bowie of JMax Plumbing in Tempe, AZ gives us the breakdown of a basic swimming pool and the equipment needed to function properly.
Swimming Pool Talking Points:
- Main skimmer and positioning
- Baja shelf skimmer and positioning
- Water leveler
- Paramount Airbar
- LED Bubbler on the baja shelf
- Surface returns and positioning
- Pentair MicroBrite Light
- Vacuum line
- Main Drain
- Brass flush deck jets by A&A
Swimming Pool Equipment Talking Points:
- Plumbing & Sizing
- 3-way valves
- Ball valves
- Drain Valve
- Fittings
- Spacer cell for salt cell
- Paint plumbing
- Labeling plumbing with stickers
Episode 109: Pool Plumbing Fundamentals and Best Practices with Justin Bowie of JMax Plumbing
Listen Here: www.poolchasers.com/blog-1/20...
JMax Website: www.jmaxcompanies.com
JMax Instagram: / bearded_plumber
Visit Pool Chasers Website: www.poolchasers.com

Опубликовано:

2 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@JasSinghGrewal 3 года назад

Perfect work bro. I’m a custom home builder doing my first pool for a customer. This helps. Keep up the great work

@jeffreystembridge4498 3 года назад

As a pool tech, installing unions is key in helping techs down the road incase the pump does need to be pulled, instead of cutting pipe your only unscrewing the union. Otherwise super super clean work. From my experience unions are like gold when pulling a pump.

@santiagosalcedo7653 2 года назад

Definitely I agree, unions are a must have otherwise there's no other way to remove pump but to CUT the pipe which is a big NO in my list, besides very nice installation.

@CTINF Год назад

@@santiagosalcedo7653 could have installed high temp unions at the pump in and out ports .

@adamdemirs3466 3 года назад

That is a lot of plumbing! Would take me a few tries to get it that clean. Everything looks professional and clean.

@jfssparky 2 года назад

Cleanest set up I have seen yet. Not a plumber though well not this week. Very good looking job 👌

@iamdc_ Год назад

Jason knows his stuff!

@oscarchi5816 2 года назад

Right on. Very informative. Nice and clean job.

@juliojones8402 3 года назад

Great work brother.

@joseluisantillon1694 3 года назад

Great job

@lowlightevangelist9431 2 года назад

Excellent work, tradesman.

@illtrax 3 года назад

Such a clean setup! Great tour.

@casejoe344 3 года назад

dont know if anyone gives a damn but if you guys are bored like me during the covid times then you can stream all the latest movies on instaflixxer. I've been binge watching with my brother for the last few months :)

@tatumleonidas1444 3 года назад

@Case Joe Yea, been using InstaFlixxer for since november myself =)

@coltenxavier7601 3 года назад

@Case Joe Yup, have been using InstaFlixxer for since november myself :)

@ElimanGibba 2 года назад

Educational & good lecture.

@desertcamel3573 2 года назад

excellent video

@aldenpines 7 месяцев назад

At 4.0 I note the drain valve. Good idea.

@mattjohnson6809 Год назад

Very instructional

@superdupert6 2 года назад

So when you have an automatic vacuum cleaner, do you plumb that vacuum line independent from the main drain suction line with it's own three way valve? Or do you just tap that auto vac line into the main drain suction with a pvc tee?

@mattc.310 Год назад

That's a nice set-up. A lot of work and quality parts. My pool has one inlet, one skimmer, a pump and a filter. Don't know what the grate in the bottom is supposed to do.

@bluediamondpools5569 3 года назад

Do you have a video of the airbar when that pool was finished?

@bojangles_bonjangles8000 2 года назад

Clean. Do you reduce the returns entering the pool or is that also 2”?

@Smooleo 3 года назад

New friend here great work guys 👍

@markbirmes2225 2 года назад

Cleanest EQ set ever. Only thing that would add to value would have been long plumbing w/out EQ and shooting the pad in with gunite. Very thoughtful return placement. The customer did an A+ job finding you. Are you doing an acid start up? Wondering what type of plaster finish you are using as you are saving the salt cell.

@Rob... 2 года назад

Beautiful setup.. Only thing missing is the heater

@WalkersLawn Год назад

Very nice! What type of paint did you use? Thanks

@waynewright5712 2 года назад

In your video you said that the pluming lines were painted, is this something that you recommend, and is it a special paint?

@spaofficials2695 2 года назад

Great video , learned a lot ! your arrows on the two skimmers lines are showing the wrong direction though! they are on the suction side going into the pump, not the other way around. I got confused ;)

@asianangler 2 года назад

do you need any electrical wiring for the LED bubbler?

@chriscross329 3 года назад

would be nice to see the end result of the pool and how all that equipment works

@maretaposey8469 2 года назад

I am in Dallas, TX. I have an older pool I would like to add this product to. Is this system only able to be installed in new construction? My pool is too deep. I would like to have the depth decrease to make it kid friendly with a tanning ledge.

@dshudson 3 года назад

Wish I could afford a pool like this

@mixingsacks 3 года назад

is it California code to only run sweep 90's ?

@asianangler 2 года назад

so how many total returns you got on this pool? at least 5, 6?

@asaadmk1 3 года назад

thanks very very informative, 2 questions , 1- i only have 3 meters between the home and the fence , is it enough to make 5 by 2 pool cause you have to leave space for the cement and stuff? 2- should i get salt cell or choline system? thanks in advance

@chengkhang2804 3 года назад

Should contact a builder, to see what can and cannot be done, but I get the feeling that it may be a little close to even pass code.

@JonasConcepcion 3 года назад

What paint do you use and color to match pentair equipment?

@poolchasers 3 года назад

Typically its called Almond

@pemocity1450 3 года назад

Wait, you said the 2in pipe can carry 50g/min and the 1.5in can carry 60g/min. Is that correct?

@18jchandler 3 года назад

2" was 50gpm on the suction side, and 90gpm on the pressure side. The 60gpm was on the pressure side of the 1.5" pipe. I don't know if those numbers are accurate, just what he was talking about.

@MrBmxbrawler 2 года назад

Why are the arrows facing the wrong way in front of the pump. Lol. Both sides.

@bw120588 Год назад

Was loving it until you ran the main to the skimmer

@albaniansk8er 2 года назад

That’s a cool system but how is that anything like the average in-ground pool? and how is that going to teach anybody about how a standard inground pool is plumbed

@drdrew3 Год назад

You could draw the plumbing diagram for a simple 10,000 gallon pool on the back of a napkin in 10 seconds. This is for a more modern and advanced installation. Great to see a tradesman who has mastered his craft