Bass Guitar Neck Relief Explained From Luthier's Lair LIVE!

Подписаться 1,5 тыс.

Просмотров 7 тыс.

50% 1

Here is a short excerpt from the video Is your bass guitar set up correctly? Luthier's Lair LIVE!
It explains the meaning of guitar neck relief, and what you can do to achieve it!
The link to the full replay of the live stream:
• Is your bass guitar se...
If you enjoy or find this content of value, you can help me keep it going by clicking the link below! Best wishes to all!
paypal.me/garydenyerbasses?lo...
Visit my Facebook page:
/ garydenyerbass
Visit The Gary Denyer Custom Basses Website:
garydenyer.com/
Twitter:
/ gazzbass
Instagram:
/ gazzbass

Видеоклипы

Опубликовано:

1 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@gdenyer 2 года назад

If you enjoy or appreciate my channel and would like to support it: www.paypal.com/paypalme/garydenyerbasses?locale.x=en_US

@SwingEzzZZ 6 месяцев назад

I think you should say forward bow not backward bow at 4:55. There are errors in the drawing shown as well. To correct too much forward bow ( too much neck relief) the truss rod needs to be tightened and that means to turn the adjuster nut clockwise not counter clockwise as shown in the drawing. I think it is easier to define what neck relief is. Then, if there is too much relief ( feeler gauge drops or slips between the string and the fret easily) --->tighten the truss rod by turning clockwise. If the feeler gauge can't slip in between the string and the fret, i.e. no relief then loosen the adjuster by turning counter clockwise.

@Mr4Strings 6 месяцев назад

Yeah, I thought so too. Apparently this dude doesn't care or he'd fix it. More concerned with his little special effects. Form over content.

@philbris2379 2 года назад

Yep Gary 🎸 excellent

@crankMiHoffer 2 месяца назад

appreciate it!

@MarkyOosterveen 2 года назад

What if I have a bad back bow but my truss rod is maxed out and can't be tighten anymore?

@gdenyer 2 года назад

Hi, There are three ways that I know of to combat this: 1. Slacken off the truss rod to a neutral position. Then give the neck mechanical assistance by pressing down on it while adjusting the truss rod. 2. With severe neck bending, you may need to use a heat press on the neck. Here is a great video demonstration of this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sYFGoeZZeas.html 3. If it's a bolt-on, you may need to buy a replacement neck. Hope this helps some. All the best!

@McCambira 8 месяцев назад

and the relief for the acoustic guitar?

@job1778 Год назад

What about open string buzz , having it on the D and G.

@gdenyer Год назад

Hi! This could be a number of things... 1. Neck has too much of a back bow. 2. String action is too low on the treble side. 3. Neck is twisted. 4. Frets are uneven/high on the treble side 5. The nut slots are too deep on the treble side. If very light gauge strings are used, I would check nut slot depth first.