Bath mixer installation 

Being one who records whilst they work and edits in the twilight hours. I know the difficulties and how much effort goes into making these videos. Material like this is undervalued. Education has changed so much with RU-vid. Society are gaining the equivalent of a RU-vid plumbing degree. It's good when it's used for something positive like making individuals better engineers. Onsite experience is vital as well as real qualifications. Yet this media stream and experience passed on is helping nations strive to better engineering standards. It would have been a game changer if I had some of these videos when I initially qualified as a plumber 13 years ago. There was hardly anything like this to watch. It's great that the information is there for those that are thirsty to grow in their knowledge of the trade.

شكرا استاذي الفاضل على المجهودات والمعلومات وطريقة السهلة لتركيب ميلانجور دوش شكرا جزيلا.

So perfect and very professional way. But sad part is todays world there are very few plumbers like you who work very honestly and precisely.

Bath mixer installation. A few tricks and tips to make your installation a whole lot easier. See how to connect the fittings to the sink water lines using PEX water lines and PEX fittings. This is the BEST plumbing solution for beginner DIY plumbers! It's so simple to install new water lines to your sink or "double sinks". In this bathroom training video you will learn how to use PEX water lines and fittings to quickly and easily plumb your new bathroom sink! Bathroom Plumbing is SIMPLE to do if you have the right instructions to follow. Watch this diy bathroom plumbing video and learn a few Pro secrets for getting your sink water lines installed right the first time. How to install a drain system and explains different ways to configure it for your own situation.

That's a good job sir. I'm a plumber too from Cameroon. I'm a female plumber.

It's recommend to check the water leek before pit silicone

Thank you. In reality I had an old house where the 2 end pipes weren't at standard distance, even with the Z fitting supplied with Hansgrohe tap, I had to buy a pair with longer arms (that also conventiently have a shutoff valve in them). Then the 2 end pipes didn't end extend to the same distance in the tiles (old Z fittings were different from one another), so I had to get a lengthener adapter which I had to cut to size with an angle grinder. It's of different metal than the rest so the connection started to rust. When trying to place the tap, only 1 end connected at the same time, because the other end wasn't on the same axis (not parallel in any way) even if the distance was correct. With some teflon string I managed to hook into it and now it seems all good. It took 4 months (99% of that is procrastination while we only showered with hot water as the tap wasn't connected to cold, thankfully hot water temp was adjustable). What a journey xD

Yeah I agree with the comments, everyone's a critic. If you have a membrane then you shouldn't need silicone. Other than that showing exactly what you did at each step was perfectly executed. Thanks for the upload.

Bende bir sıhhi tesisat ustasıyım. Çok güzel bir montaj oldu. Biz eskiden silikon yerine derz dolgu malzemesi kullanırdık. Şimdiki imkanlar çok geniş.🇹🇷🇹🇷🇹🇷

Excellent video !!!. Important details: With the traditional cannula on the cam there is no likelihood of teflon turning the cam at the moment when the two battery connectors are screwed into the cams. The German wrench (13 or 14 & 30mm) in the bending of the cams and the battery connectors on the cams is the most suitable tool for throttling.

Very good fiting amazing good information zabardast fit karne ka Tareeqa

Thanks. ... it helped a lot✌...that wasn't very difficult ... now doing the installation on my own. .. rather than waiting for my lazy brother doing it☺

Wow nice tutorial my friend and very informative content it's so very interesting video full support here my friend

Démonstration clear and clean?! Bravo?!

Salut merci 👍

قبل ان تضع السيلكون يحب عليك مراقبة ماركبت لتتأكد من الماء هل يخرج من بين المنشون وألا s والكود

master you are the best plumber in this words for my said now

people on here saying dont use silicon , you use silicone to stop any water running down the back of the tiles and making them come off over time

Nominated for best original screenplay...

Excellent video and no annoying commentary. Well done!

ماشاء اللہ

Can you please explain what you have screwed into the pipe prior to screwing in the off centre adapters, and also what you have in the wall to begin with from the first fit?

Precise work! As a regular person who has no idea how a plumber install things but try to fix small plumbing problem, ur work is much better than the one in my place now-especially the silicone putty part. Thats missing at mine 😮

Buen trabajo y buen video. Es importante aclarar que el secreto reside en hacer una correcta instalación -nivelación, profundidad, etc.- de las tomas de las tuberías de agua fría y caliente. Caso contrario, se dificulta mucho este trabajo final. Felicitaciones!!

أكثر من رائع(more than great)

Getting the rough in to be perfect is the key here. Good job

Very informative. Thank you.

Antes de colocar el grifo y poner silicona en el orificio se pone un tapón y se prueba .Si tiene tan solo una gota de pérdida o fuga está no se verá porque el azulejo y la silicona lo tapa y puede tener consecuencias de humedad y filtración al cabo de tiempo.

Arab saudi menyimak salam kenal

Thanks 🙏. interesting video Mohammed from Iraq 🇮🇶

hi everyone ,i saw many poepole ask about the name of the tools used in the video well its name in frensh is i hope so guys i helped you

Id wrap some tape around the pliers before tightening the mixer, wont the metal pliers scratch the chrome?

C'est le meilleur metié au monde c'est ma passion

Sorry few things wrong in this video, what about a leak test after the connection was made then filled with silicone which then makes a mess if their was a leak, also if ur gonna use silicone use it properly by smothing it off onto the tile which will guarantee water tight 👌

At first I would install the faucet without the caps, turn on the water in the house and see that there is no leakage in the connections in the wall, only then would I put silicone and install the final faucet

A very nice and educative show

Marcus from Haiti. Good Job

الله يجزيك خير ويعطيك الصحة رحم الله من عمل عمل صالح فاتقنه

So, what if the inner connection with Teflon tape leaks?

Excellent and simple video.. Thanks

Thanks verry helpful❤❤

Hi Nice video, which tool you used to fix the hex nipple?. Where I can buy this?

شكرا عاشت ايدك اروح اجرب اشد الخلاط مالتي واشيل الحنفيات اللي جانت مربوطه والله يستر

Nice

Master class👍

Good I am electrician and plumber

بارك الله فيك وجزاك الله خير الجزاء مشكووووور جدا و بالتوفيق لك يا رب العالمين والصلاة والسلام على رسول الله صلى الله عليه وسلم ❤ 🕋

Thanks. Very helpful.

Когда руки на месте, получается очень хорошо 👍

شغل ممتاز ......... شكرا

This is the fitting of Bangladesh 😍😍

Antes de poner todo hay que verificar si el agua sale,me imagino después se le haga una fuga 😂😂😂a sacar la silicona y todoo🙄

شغل ممتاز وبدقه تحياتى مستر

Better to do away with the offset irons, just go for a straight fixing kit, all compression on the outside of the tiled surface. As long as pipework is 150 mm apart you're good to go.

Thanks alot it is works .

Hindware best ❤️🤗👍

Wow awesome sir

Il faut d’abord tester l’étanchéité avant de mettre le silicone. Thank you for sharing.

The perfect video. Thx.

I like it to this plumbing system bro I interested 👍

THANK YOU

At 5:14 how souare you are that the fitting is not leaking after installing sanitary silicone before you check!

I really need some help right now. What’s another option is the plumber didn’t measure the length of the of the pipe in the bathroom walls?

شكرا على التعليم

Very good ~

Everything is excelent except putting the silicone arround the hidden elbow because you might find Leaked or broken, then forced to loosen again

Nice to meet you

Good job i am a plumbing from Mauritius, and bricolage wood metal cement electric

nice. ..how do you know there is no leaks between the tiles and wall?

Muchas gracias,muy buen video

Very good

Whats the max distance allowed between the two water lines , middle of the pipe to the middle of the pipe?

Extremely unprofessional job. Teflon thread and hemp should not be used to install the shower faucet. If you use Teflon thread, you can't undo the cam anymore because then it leaks. Unlike hemp, Teflon has the disadvantage that it cannot be adjusted in the opposite direction. I have not seen anyone use it to assemble the battery where you need to make adjustments to the position. You have no idea what to use. If you scratch the screws when tightening them, you should use cardboard or a cloth. You should smooth the silicone with your finger.

How to make sure

Is it easy to change where the water opens It's on the wall, and I want it with the sink in my kitchen???

I did no about putting a silicon thank you very much lm learning

What's that reducer adaptor called? And what size? I'm talking about the reducer that u use b4 putting on the s union

very useful video thanks

Nice man,keep it up

before the silicon you need to check leaks and run the water couple of minutes and then it is smart to do it you worrk neat congratulations

أنا 18 عام اعمل عامل تجهزات صحية في تونس و أتمن ان اشتغل خارج البلاد وبالاخص فرنسا ان شأالله...

Thanks for your expliquing

Does any one know Which is the small fitting inserted in the Breech system before installing the angle adapter?

Jolie travail

Good

Super work

When tightening the nuts on the mixer to the thread, how are you stopping it from over turning the whole thing?

Gracias por la idea le pondré en mi canal .. bendiciones

Hi, what is the name of that fitting you put in before inserting the s union connector? Can't find it anywhere.... Thx

Zabardast fine sir

What is that first brass fitting you installed called?

Professional work ❤❤🎉🎉

Super

I realized the engine couldn’t fit into the pipes in the wall. Is there an alternative?

These fancy things work well only when your main water supply has been cleared of all forms soluble calcium compounds. Else your gadgets will foul up and stop working as you desired.

Perfect work ❤❤❤❤❤❤❤

👍

This is outstanding

No silicon

Devitor koi kase fit karte hai