We all know how the bathing area is the place that makes the entire bathroom wet and unhygienic. There’s nothing more annoying than entering a wet bathroom and getting your feet soggy. But don’t you worry, the Jaquar shower cubicle is the perfect solution for this!
Installing a bathroom shower cubicle ensures that there is a clear demarcation of the bathing area and the rest of the bathroom. A division in the bathroom ensures that water doesn't spread to the rest of the area while you are enjoying your bath.
The Jaquar bathroom shower cubicle -1840L is a 3-part corner shower cabinet with two fixed glass and an openable door fixed on the side panel.
Here’s how you can install a shower cubicle:
1) Take a pencil and mark the desired area of the wall.
2) Take the metal plate, take out the nuts and fix it on the shower glass enclosure by tightening the nuts with the help of a screwdriver.
3) Now mark the points according to the metal plate on the wall and mark the holes of the bottom too and drill the marked points.
4) Now fix the metal plate on the bottom area with the help of a screwdriver.
5) Attach the metal plate to the wall that holds the glass with the help of a screwdriver, and attach the outside metal plate too.
Check out Jaquar’s Free walk-in shower glass enclosure with stabilizer - 1 part: www.jaquar.com....
6) Now repeat the process on the other side of the glass too in an L-shaped form.
7) Now, pick up the handle and fix it horizontally on the outside of the bathing space and vertically on the inside of the bathing space.
8) Now pick the small third piece of glass, which is the smallest one and take its metal plate, take out the nuts and fix it on the glass by tightening the nuts with the help of a screwdriver.
9) Now mark the points according to the metal plate on the wall and mark the holes of the bottom and drill the marked points.
10) Finally, attach the metal plate to the wall that holds the glass with the help of a screwdriver and attach the outside metal plate too.
11) Now, take the two rods and fix the loops onto them and two supporters in the end and place them on the top of the glass in an L shape.
12) Now mark the height of two ends of L shape and fix the nuts into the wall and place the L- shape rod on the top of the glass.
13) Tighten all the screws of the rod and make sure the magnetic beading is placed on the glass edge, and the glass should be open inside.
After the bathroom shower cabin installation, please check whether it is done perfectly. If you find any issues, please trace back your steps and make sure it is installed properly.
To find more about shower room design and bathroom solutions, subscribe to our youtube page: / jaquarindia
Read our comprehensive guide on different types of showers to find the right shower for your bathroom!
#jaquarshowercubicle #showercubicleinstallation #showercubicleideas #showercubicleinstallationguide
18 май 2017