BAY WINDOW COLLAPSED!

Подписаться 67 тыс.

Просмотров 72 тыс.

50% 1

WANTTO SAVE FUEL AND INCREASEPOWER. click this link
👇👇👇
tdi-tuning.com/
WANT MY FULLY WORN IN CARBON STEEL TROWEL?
ONLY £4
👇👇
kirkstrowel.carrd.co/
I hope you enjoy this video and if you want to buy me a cold one then you can do that just here.
👇👇👇
www.buymeacoffee.com/onthetrowel
I genuinely appreciate your generosity 🙏
If your a tradesmen and you would like to see how to get more work and earn more money then we should talk!
hit this link now...
👇👇👇
onthetrowelcoaching.carrd.co

Опубликовано:

17 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 220

@PJ_CJ 5 месяцев назад

Surely you gave customers an estimate if you encounter a problem then they should cover the cost to put that right first not you

@Onthetrowel 5 месяцев назад

He was an old bloke and I don't believe in just charging extra. To many conmen do this to the older generation. We agreed a price before the job started and I just got the job done to my best ability

@victorcastle5463 5 месяцев назад

Topman

@nigelsmith1198 5 месяцев назад

Not many of you about kirk.! Top bloke 👍

@jimbandit1250sa 5 месяцев назад

Top guy

@kevinsaunders5104 5 месяцев назад

integrity at its finest @@Onthetrowel

@heymofo1981 5 месяцев назад

this reminds me of my house, start one job it leads to replacing the whole house loll

@Ian-ev5tg 5 месяцев назад

Be careful with those tuning boxes. It’s basically just a resistor that increases fuel pressure at the rail. You won’t get better fuel efficiency and more power. That’s just the law of physics. Your van might report better mpg but it’s being fooled. If you check your fill to fill amounts for mpg, you’ll find you’ve lost mpg. They also invalidate your vans insurance. If you have an accident and the box is fitted, they won’t pay out.

@Ireland-bc2gx 5 месяцев назад

Have fixed and repaired dozens of bay windows here in Florida,and the cement board base coat and mesh with a top coat is the way to go 👍

@sidstewart7399 5 месяцев назад

Those on about airflow, as long as full fill no airgap needed. What i would recommended on these is to remove the internal plasterboard and fit 25mm insulated plasterboard to help with cold bridging. May have to fit new window boards.

@dsotm58 5 месяцев назад

Very very neat and professional work, just a shame your mate didn't take your advice about safety foot wear and gloves when taking the original bay apart.

@da-mazing8500 4 месяца назад

Your attention to detail and care for your work comes across strongly on your videos. Well done

@Trade920 5 месяцев назад

Great work Kirk, you mentioned it’s cost you money with extra materials etc but surely can’t you explain to the customer that the bay window was in a terrible state and that you weren’t to know this until you started taking it apart. So surely that’s the customers place to pay for the unforseen additional work??

@dragonfitter 5 месяцев назад

Don’t work like that .

@nigelparker5886 5 месяцев назад

@@dragonfitterBut on occasions like this it should, at least to meet in the middle!? Cheers

@ifIcandoit777 4 месяца назад

Love watching your videos mate you do a cracking job, just for future reference though that Dryzone kit is for internal surface mould 👍🏻

@DalePriestley-hs3rc 12 дней назад

when we have priced jobs we wxplain depends whats behind in all aspects of plastering eg damp work or you got to take down certain amount of ceilings etc do that cant lose

@johnjennings6352 5 месяцев назад

Kirk you are first class I hope your customers happy you always do your best for them, anyone could go to work with the knowledge you would not let them down or cover up any carp work.

@paulwisdom5383 Месяц назад

That render looks beautiful to use. I've never rendered but that's like buttercream

@impamiizgraa 2 месяца назад

Those corners are insane! Wow - perfection.

@silverbackgamer1beast572 5 месяцев назад

I was on a live of yours and I asked about some black mould in my bedroom the estate agent has now decided thay are going to send a plaster out to have a look thank you for you advice on the situation I have 🔥🔥🔥

@Onthetrowel 5 месяцев назад

Pleasure mate

@craigwilliams6734 5 месяцев назад

Great job Karl! That top bay didn’t need supporting I guess…? The final scraping is a revelation to me!! 😜

@Trekz86 5 месяцев назад

Do you ever use other finish coats for render? Here in Australia we do a 3 coat system. It's coat acrylic render hi build then a second skim coat of acrylic render and then we do a coloured texture coat and we float it up with a plastic trowel. We also never use plastic corner beads. Always galvanised aluminium or stainless steel

@drsteelhammer4056 5 месяцев назад

Hi Kirk..I’ve never done k rend before..I presume you have to fill out the beads more with plenty of gear as to scrape it back yeah? By the way,I’m at it 20 years and you’re the best I’ve seen😊👍

@roontunes 4 месяца назад

been using 12 mm multipro boards, beautiful product. I use a cheap mini circular saw with a carbide tipped blade and nick a 1mm line in the board and they snap dead easy

@notme1345 5 месяцев назад

Top job i bet it made the world of difference to that room.

@user-pe9qg3hg3k 17 дней назад

that HQ looks proper cosy mate! love it!!

@aaronthomas1897 5 месяцев назад

Cant fault it kirk you went above and beyond ,most trades i've come across would of run a mile but you took it on the chin and used your knowledge to provide the best result for the customer,and now with your van with more power you'll have to slow down between jobs cause the render will still be wet 😅 keep up the excellent work kirk 👍🏻 i thought that scrape at the end was the sound of sierra deltas breathing 😅

@Onthetrowel 5 месяцев назад

He sounds like a stalker doesn't he 🤣🤣

@MicroCheddars 5 месяцев назад

I've just found your channel and it's fantastic. I'm not in thevtrade I'm in IT. I love watching how things ate done, and learning. I have to say though your so darn good, not just your job, your a great people person. Keep up the great work.

@Onthetrowel 5 месяцев назад

That's very kind of you to say. Glad you enjoy the content and thanks for the nice comment 🙂

@Liverpool1ne 5 месяцев назад

Plasterer, joiner, builder all in one mate 💪🏻

@silverbackgamer1beast572 5 месяцев назад

This is what I mean about a good tradesmen love How you don’t cut corners mate do a proper job first time round

@420styletomatoes6 5 месяцев назад

He doesn't cut corners, he plasters them...

@silverbackgamer1beast572 5 месяцев назад

@@420styletomatoes6 when I say he doesn’t cut corners I mean he does a proper job etc first time round where some do a quick bodged job and you end up with issues

@420styletomatoes6 5 месяцев назад

@silverbackgamer1beast572 sorry mate, I was being sarcastic, watched several of this man's videos and he always does a good job.

@silverbackgamer1beast572 5 месяцев назад

@@420styletomatoes6 I know mate I was just makeing sure u didn’t misunderstand me mate it’s all good

@dennisgoodhall 5 месяцев назад

Gotta love a friendly back and forth over what was a misunderstanding without anyone getting upset or offensive

@Whoop0 5 месяцев назад

You're incredible, a true professional. Top workmanship, massive respect.

@shaynewilliams2703 4 месяца назад

Love the K98k on the wall. Us plasterers aren't just plasters.😂

@monkeyboy8424 4 месяца назад

Great video of a proper tradesman at work. When you mix your various products can you show the bags with the labels. Thanks.

@Onthetrowel 4 месяца назад

Sure thing!

@marski-vv4qb 5 месяцев назад

That’s a cracking job you guys have done ✅

@davidmelling9301 5 месяцев назад

Another top job love your videos, keep up the brilliant work, mate

@davidstabler285 5 месяцев назад

Really impressed with the work you do mate I’m 20 years in ,you cover all aspects of work carried out and leaves the customers feeling happy which it’s all about give me a call anytime if you need a lift 👊🏻

@paultowns9880 5 месяцев назад

That does look lovely. Good of you to stick to your price for the old fella Kirk. A true gent.

@pckpb5579 5 месяцев назад

Nice Job and good safety tips- although you forgot to mention- rember to always have your mum on Speed Dial 😊

@dccowell56 4 месяца назад

good job, like the color

@justinwalker5237 5 месяцев назад

Great work . Do you need to rule that of to get it flat . Like the scratch coat . Or do you just lay it all down . Then scratch it back flat. Been plastering for 20 yrs and never used the product

@Ramblingpete 5 месяцев назад

I can’t see it working but I hop it dose for you that bay window 👍🏿👍🏿👍🏿

@geoffreywilliambradley5015 5 месяцев назад

When I was plasterering I came up with an idea to use rubber based tilers glue for my scratch coat over blue board and cement board never had a come back give it a go and see what you think Cheers Brad

@levispartan1993 5 месяцев назад

im not a joiner but best way to get snug angles ive found to run handsaw down the mitred joint when it's sumwhat good love the videos bud just subbed :)

@Cablesmith 4 месяца назад

Top job, can’t believe them Bricks just sat in the window below, no wonder it cracked 😂

@lordracula2461 Месяц назад

More common than you'd think, it's brick-nogged construction. Certain era of cowboys/planners/architects thought it was acceptable to lay bricks directly on top of window/door frames instead of lintels, reinventing the wheel. It's likely that this is original to the house

@brad20105 5 месяцев назад

You say your not a joiner kirk, i say im not a plasterer but im a multi trade several years in maintenance and put my hand to anything always to the best of my abilities and only attempt something i know im capable of completing to a high enough standard. You mate you killed that finessed it in every way 👌 i bet hes nice and toasty now in that front room bet he was froze before 🥶

@dannygreer1 5 месяцев назад

Who’d have thought Dark Vader was a 6ft+ burly lad from Ellesmere Port 😂 Looks mint that chaps 👌🏼

@CLIVETHE125 5 месяцев назад

Looks lovely 👌

@RichardDowd 5 месяцев назад

Awesome end result Kirk, you actually look like you've lost a bit of timber - maybe you put it in that bay!!

@NiktheEnglishGreekCypriot 5 месяцев назад

Fair play with regards to the cost mate. Personally I give an estimate. The estimate fully covers the works stated, however it states that any works drastically outside the original scope of works will have to be charged. I don’t think i could be any fairer than that.

@scullo2293 5 месяцев назад

That’s what all of us do pal

@NiktheEnglishGreekCypriot 5 месяцев назад

@@scullo2293you’d be surprised mate, so many of my mates who are in the building game still give set prices. They get caught out all the time if things go wrong, which they inevitably do

@scullo2293 5 месяцев назад

@@NiktheEnglishGreekCypriot you should only need to do it once 😂 you think they’d learn after the first time

@scullo2293 5 месяцев назад

I also wouldn’t be going to another job halfway through the day

@NiktheEnglishGreekCypriot 5 месяцев назад

@@scullo2293100%, i got caught out on a decorating job, quoted 3 days and was there 7, never again

@joshuamatheron1 5 месяцев назад

I’m very impressed and quite surprised you didn’t charge any extra for the work and materials. Most would. You’re a good man 👍

@robgrooves6839 5 месяцев назад

Take it easy with your van more power more torque & you'll use it now its there = new flywheel can't take the power, possibly turbo just drive it as you did. Nice job can be a nightmare the old bay window's 👍

@RhinstoneSouron 5 месяцев назад

Don't worry, that kit installed is doing fuck all to that van.

@bigblue1972 Месяц назад

brilliant jobs mate lovely jubbly

@gman5523 5 месяцев назад

Timber work is ok mate. Well done 👍

@John-ou4rm 5 месяцев назад

Another thing with those houses (As we refurbished one in M20) is a lot of them historically had steel STRUCTURAL windows in them initially and these acted as structural support for the upper floor bay window, that's why they could have bricks there. Loads of people have since updated to plastic windows, but these are insufficient for the weight of the upper floor. Hence if going for plastic windows need to remove all the weight as you've done.

@Onthetrowel 5 месяцев назад

That's it mate, I just thought it be best to take it out and get some insulation in there

@tobygreen5877 5 месяцев назад

Mate that looks mint! Good job!

@Ramblingpete 5 месяцев назад

I like it wen you say just a little job in between another 200 pounds in between nice one

@Nickpaintbrush 5 месяцев назад

Nice job mate and nice little man cave as well!

@da-mazing8500 4 месяца назад

Just a question as i dont know, but would you need to vent the bay window as there is a cavity behind the insulation?

@andywest3260 5 месяцев назад

Little tip when putting beads on put a wash on and it stops it from bubbling up on the bead

@tdhpst 5 месяцев назад

A wash?

@jeffreygreen158 5 месяцев назад

Another great job its class when a plasterer do a great job can not beat it.

@mikebond3763 5 месяцев назад

What are your thoughts on corksol for internal bay window walls to try and control condensation?

@mgleeds3834 5 месяцев назад

Hp12 sticks to anything. Ive splattered some on my vans around 2018 and its still on there and wont come off

@DirigiblePlum69 5 месяцев назад

Really good video mate, and keep up the good work

@yvonfem 5 месяцев назад

Top job bud youre a real pro take pride in youre work.

@bricklayersworldwithandy6277 5 месяцев назад

The original window would have been timber and load bearing, you need to check the new UPVC windows to see if they have a steel frame in them to replicate the original. Common problem with window companies who don't have a clue.

@paulreilly5987 5 месяцев назад

What about using PRB modern lime renders instead. They are colour through too. The krend scrape coat looks like a bit of a timing challenge.

@OuryLN 5 месяцев назад

Most bay windows are like that! Mostly bad brickwork by amateurs!

@Alex-if3sr 5 месяцев назад

I think most ground floor bay windows are brick but 1st floor shouod be stud frame? Otherwise all the weight of the bricks is on the window frame below.

@hiyes5221 4 месяца назад

Good effort mate 👍 decent channel some top tips ❤

@matthewhunty 5 месяцев назад

Lovely job well done

@davidbambrough5962 5 месяцев назад

you might not be a joiner but a very talented guy love the vids

@Excel510 5 месяцев назад

Never mind you're not a joiner, you've done a great job, keep up the professionalism

@baldrickscunningplan6154 5 месяцев назад

Been there, done that. Rotten timbers,no insulation. The property had been re-rendered previously which was hiding all of the horrors underneath. It was completely rotten and only the windows were holding the rendered section in place. It was only visible when the window was removed. Customer refused to pay anything towards the additional cost of the work. Like Kirk. I got burned on that one. .

@imwilki 5 месяцев назад

You hear horrors stories about tradesmen jacking up the price but where a job develops into something else you need to charge extra for unforeseen time and materials maybe set out the risk of what you might find in the quote and likely extra cost . Craig and yourself shouldn't bear that risk, old geezer probs on a final salary pension scheme !!

@baldrickscunningplan6154 5 месяцев назад

Sometimes you get faced with a loss that could possibly turn out to be an even bigger loss by digging your heels in. Walking away from the job, when you have already purchased several thousands in materials is not an option. The customer may not be in a position to pay for the additional costs. Then there are the elderly customers or families, that you cannot consciously ask for more money. Sometimes you just have to chalk it up to a bad experience. Leave the customer happy and get paid. There is always the next job.@@imwilki

@andywest3260 5 месяцев назад

Good effort on the miter i have seen worse mitres From carpenters

@billysplinterbillysplinter7348 5 месяцев назад

Pvc windows can't take that load, who ever replaced the window should have seen this problem. The original windows will have had mullions on the middle window, the minute this was removed, the cracking will have started. Found that out the hard way when I first started replacing windows around huyton, Roby area back in the late 80s.

@steved6472 5 месяцев назад

We bead under the sill too it’s more of a reference for depth! 💁👊

@Onthetrowel 5 месяцев назад

That is a good shout 👌 Do you follow it around the ends of the sill and join up with the corner beads on reveals?

@steved6472 5 месяцев назад

@@Onthetrowel absolutely! Reice (my nephew) is anal as hell Kirk! ( good training) I gave you the tip about the bead up the window frame for reveals too and you still ain’t gave me a shout out! This is becoming one way traffic lad! 🤮😂

@user-if1ln7cx4z 5 месяцев назад

Always watch your videos keep up the good work pal 👍

@davedyson4730 5 месяцев назад

Brilliant finish. Really top class.

@steved6472 5 месяцев назад

We have so gotta get you spraying lad! 🙏🤯👊

@BigJL15 5 месяцев назад

I don’t work in any trade, and I hate doing DIY jobs, but I just can’t stop watching these vids. Good work.

@Onthetrowel 5 месяцев назад

Glad you enjoy them mate, thanks for the support

@vincemccarthy2165 18 дней назад

The darkness don't like the light. Vincent

@petergalloway7978 4 месяца назад

Kirk l am a 77 year old retired plasterer the cement boards seem good ln my day we would have used rib lath

@user-bn3vh8ke2g 5 месяцев назад

your always decent job, especially old people and done more than expected as always hope he sorted you out a drink 🍺🍺

@steved6472 15 дней назад

I hate bays! Monochuche don’t like curves! Where I live they all have a bloody curved bottom and it’s a nightmare! I’ve never had that happen though! You done him a good one there !👊💯👌

@brianp7022 3 месяца назад

You can use a dremmel with a tiny disc.. A lot lighter too😂

@chowfont 5 месяцев назад

You're far too generous mate, i wished you lived near me, would be fantastic to have someone like yourself on hand to work on my house 😊

@nickhoward9343 5 месяцев назад

Nice job ✅

@richardsandwell2285 5 месяцев назад

They always were bloody ridiculous things, I have one, mine is basically one layer of bricks hanging in mid air using what used to be a wooden window for support, not sure what I am going to do with mine, it has got a few cracks but is maybe a bit better than this one.

@Dec38105 5 месяцев назад

how long do you leave the render before final scrapping ?

@dantaylor1724 5 месяцев назад

Great job !

@johnwardle9667 8 дней назад

Why didn't you charge the customer for the timber and labour to repair the bay? You are too nice!

@chapmansboxingclub2611 Месяц назад

Hello mate, where do you get the scratch finish bars from and what are they called. Im a plasterer in spain and use k rend alot but we only have scratch pads which are not good for big areas or ill habe to cut it back with a sharp feather edge

@ronnierobinson1502 5 месяцев назад

Where do you get your huge cement boards from ?? great video 😀

@jimbobalob2491 5 месяцев назад

Where in the video did the bay window collapse?

@fatwalletboy2 5 месяцев назад

Also check your insurance covers you for using angle grinders at height. Msny policies exclude this.

@Joe-jv5mm 5 месяцев назад

Darth Vader back ( he's a good laugh) on the Channel, Hart breaking when a job goes sideways. Top content

@stuartridding3842 5 месяцев назад

What a cracking job wood work looking good Top man

@user-ye7sj7gm3f 5 месяцев назад

In WHAT WAY is that wooden structure between the insulating-boards Secured at all ? I have only seen a couple of nails/screws ? IS the foam the 'thing' that is holding this wee structure together ???

@Onthetrowel 5 месяцев назад

It's attached to the brickwork at the sides and also the window frames mate

@noelwallace5257 5 месяцев назад

Just finished a job for a customer that over run by two days, due to unforeseen circumstances, couldn’t recover my costs in total but had a chat with them and managed another £500…. Tuff out there brother.

@pedrostokoe1980 5 месяцев назад

is that the heavy breather on the k rend application part you keep talking about

@shanazakhtar2638 2 месяца назад

I want to get this done

@stevengordon2145 5 месяцев назад

19:40 also don't forget ya rubber chicken & rabbits foot and never lay on after 8.30am Good job mucka 🍻👍

@Onthetrowel 5 месяцев назад

Love it 🤣🤣

@jason-hh6lu 5 месяцев назад

Nice job. 👍🏻

@timminss 4 месяца назад

Kirk what are those boots you're wearing?

@Ramblingpete 5 месяцев назад

Can’t believe haw little you drop 👍🏿👍🏿👍🏿

@RC-oi1gg 5 месяцев назад

Can you advise what ratio you use when mixing SBR and water for plastering over artex please? 👍

@Onthetrowel 5 месяцев назад

I use it neat mate

@jamiebehan5490 5 месяцев назад

Proper job mate has always great tradesmen mate

@shodan198 5 месяцев назад

Hey kirk love the vid mate

@kennethtorrens1223 5 месяцев назад

Your joinery skills aren't bad ,But the framing didn't look treated but not knocking you kirk you know more than me 👍

@Onthetrowel 5 месяцев назад

Cheers mate. I try. It was exterior 3x2. It was stored outside at the building yard. I'm not a joiner/carpenter and I know there's probably different grades of exterior timber but I reckon this will be OK. Looking back, it might have been a good idea to felt it first before the cement boards but that's hindsight for ya 🤣

@kennethtorrens1223 5 месяцев назад

@Onthetrowel you don't need to watch long to see how professional your ethic is thanks for reply