Beautiful Dinning Chair Making Step By Step Process 

All these channels are like this. The baggy sleeves near table saws or lathes are what scare me.

Зато весит как гиря

I doubt that the number from Pakistan is accurate. I doubt anyone is monitoring these small shops.

"In Pakistan, there is no national system for recording occupational injuries and work-related casualties. Most accidents are not reported to the labour department, so there is a lack of available data. Data from 10 330 industrial accidents were analysed and a decreasing accident rate was found with an average of 3.1 accidents per 100 factory workers, but fatal accidents increased with an average of 23 fatalities per 100 factories workers between 1993 and 2009 . 2 A study conducted on 300 highway workers concluded that lack of safety measures from noise, vibrations, asphalt fumes, poor work postures and injuries are considered to be major health hazards . 3 Similarly, another study from 2016 to 2017 of 70 welders found 47% experienced eye injuries and 50% cuts and injuries, and other findings indicated that welders had a low level of awareness and few preventative measures were recommended" - So that 3.1% number is very misleading.

Far worse than any Western nation. Only data from some industrial accidents is available. From BMJ Journals - "Occupational health in Pakistan: challenges and future needs"

I think you will find that the injuries in Pakistan are 32% higher from the figures you gave. I do, of course stand to be corrected.

I assume, in USA counted every scratch, but in Pakistani no one complaints about lost finger, only when the whole hand is gone. Therefore your percentage does not represent the picture