Bedroom Suite Build Series Part 1 | The Bed Build!

Подписаться 195 тыс.

Просмотров 117 тыс.

50% 1

How to build a bed! Step-by-step how I built this cottage style bed.
Queen Plans - www.johnbuilds...
King Plans - www.johnbuilds...
Matching Night Stand Plans - www.johnbuilds...
5 Drawer Dresser Plans - www.johnbuilds...
All my other plans! - www.johnbuilds...
Follow me on Instagram: @johnbuildsit / johnbuildsit
Facebook: / johnbuildsit
TikTok: tiktok.com/@johnbuildsit
Tools Used:
4’x8’ Bora Centipede Work Table - amzn.to/3uN1h11
Bed Rail Hardware - amzn.to/2Qk2LA9
Round Nose Router Bit - amzn.to/3r3kgBg
Surface toggle clamps (for taper jig) - amzn.to/3vHHb8G
Mirka Sandpaper sample - amzn.to/3cJkBEd
Dowel Jig Kit - amzn.to/3qY4rMo
Dowel Center Points - amzn.to/3bYcrsk
Starbond CA Glue - amzn.to/33Bsa9b
Zip Wall Barrier Kit - amzn.to/2YNel7H
Milwaukee M18 Router - amzn.to/2Bod9iZ
Milwaukee High Output 6.0 Battery - amzn.to/3dnrU3k
Makita Cordless Plunge Track Saw - amzn.to/34zID1H
Kreg R3 Pocket Hole Jig - amzn.to/3rVINJT
Kreg K5 Pocket Hole Jig - amzn.to/33AHD9E
Kreg MultiMark Measuring Tool - amzn.to/33yioF0
Kreg Face Clamp -homedepot.sjv.... or amzn.to/2OVEY5g
Graco 9.5 HVLP - amzn.to/3lRC8gH
Dewalt 20V Max XR Brushless Drill & Impact Kit - amzn.to/3elOMRA
Dustopper Dust Separator - homedepot.sjv.io/0J2zVO
Milwaukee 18g Brad Nailer - homedepot.sjv....
Bessey Trigger Clamps - homedepot.sjv....
Milwaukee M12 Fuel Hammer Drill & Impact gun - homedepot.sjv.... or amzn.to/2OWb4h9
Delta Dust Collector -amzn.to/3e2ZYF6 or homedepot.sjv....
Delta Cruzer 12" Miter Saw - amzn.to/3sCK88c
Dewalt Sander - amzn.to/2HuKJXX or homedepot.sjv....
Glue Brush - amzn.to/3jgZBHE
Bessey 50” Parallel Clamp - homedepot.sjv....
Bessey 24” Parallel Clamp - homedepot.sjv....
Bessey 1/2” Pipe Clamp - amzn.to/2sn5soq or homedepot.sjv....
Ridgid Table Saw (New Model) -homedepot.sjv....
Rubber Mallet - amzn.to/3eDmv8O
Titebond Wood Glue - homedepot.sjv.... or amzn.to/2TnYIke
BIN Primer - amzn.to/2HywIbf
General Finishes White Poly - amzn.to/34xnqp3
General Finishes Gray Gel Stain - amzn.to/3bYofL3
DryDex Spackling (used for filling nail holes) -amzn.to/2L5Z7UR
Crown Molding from Home Depot - homedepot.sjv....
*As a Home Depot and Amazon affiliate I earn from qualifying purchases made through links on this post.

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 293

@gwenwade6059 3 года назад

I can guarantee all watching that this bed is better finished than any shop bought!

@JohnBuildsIt 3 года назад

That’s how I got the sale! Haha everything they looked at in stores wasn’t up to their standards

@antonstafeyev3606 3 года назад

@@JohnBuildsIt right... I mean it is great finish without specialised painting room. I love it man. Begging you for a detailed video on it if you don’t mind :)

@shanegroom5879 2 года назад

Usually not a fan of white furniture, but wow you made that thing look good. That grey stain really sets it off

@tatendadarangwa1019 3 года назад

Woow this is beautiful.

@JohnBuildsIt 3 года назад

Thanks!!

@manuelkuhn3691 2 года назад

Wow 😳😳 Wish I would have seen this video before buying a bed. Amazing job on the build. Definitely worth subscribing.👍👍

@JohnBuildsIt 2 года назад

Thank you!!

@walterfigueroa7102 3 года назад

Excellent project my friend, gorgeous bed.

@JohnBuildsIt 3 года назад

Thank you!!

@bluehawkworkshop160 3 года назад

Looks great, nice and clean. Love the cove and taper, gonna have to keep that in mind for future projects. I think it would work well for a dresser or bench too if the legs are long enough. Well done!

@anthonycaldi7056 2 года назад

Dude you have next level talent!

@JohnBuildsIt 2 года назад

Haha thanks man!

@kevinhopson4291 3 года назад

So much nicer than everything we looked at Great job 👊🏻

@JohnBuildsIt 3 года назад

👊🏼👊🏼

@chrismanville6642 Год назад

Well, I watched this video, three times then bought the plans. Brilliant! Working in inches made my brain hurt a little as I’m in the UK 😂

@JohnBuildsIt Год назад

Haha sorry about that! I need to make metric versions too, but then it’d be my head that is hurting😂

@chrismanville6642 Год назад

@@JohnBuildsIt actually, because my eyes ain’t what they used to be, I found working in 1/8ths and 16ths easier to read on the tape measure 😁

@stanalaka821 3 года назад

Awesome maan.....really appreciate ur videos

@JohnBuildsIt 3 года назад

Thanks for watching!

@jordandale85 3 года назад

That's beautiful! I'm going to change it up just a little, but I'll build my next bed much like this one. Thanks!

@chrisgraham5185 3 года назад

Hey John this is really well made. Great work!

@JohnBuildsIt 3 года назад

Thanks! 🙌🏼🙌🏼

@georgevoisin5414 3 года назад

Excellent build. Thanks for the video.

@JohnBuildsIt 3 года назад

Thank you!

@nikkihopson5362 3 года назад

Thanks for building this bed for us John! Not only is it gorgeous, it is very solid and very well built! Great job as usual! I absolutely love it! 🥰

@Bamaoutdoors Год назад

Wow sir great job! I may have to get the plans for that!

@JohnBuildsIt Год назад

Thank you!!

@13daniel1974 3 года назад

Love the project. Also, love the saw. I bought one last fall and I love it. A little update for your cross pieces, to make it easier to slide this bed, is to add a piece on your crossmembers. This would reinforce them and remove the legs.

@beniciogutierres8502 3 года назад

Pretty job...nice bed..

@JohnBuildsIt 3 года назад

Thanks!!

@GUNBATOSINHISNAME 2 года назад

Great video man

@dompellegrini5520 9 месяцев назад

What a really nice piece of furniture. Nice simple design with a classic look. I'm going to give it a try. One thing, how long in total time did it take from start to finish? And approx how much did it cost you?

@JohnBuildsIt 9 месяцев назад

I really don’t remember at this point, sorry!!

@gwenwade6059 3 года назад

I wish you would do beginner classes and teach all about setting up a workshop and what tools to purchase.

@antonstafeyev3606 3 года назад

I actually bought stuff I saw in his videos. Different brands to accommodate my budget and sized differently cause my workshop is 50m2. Just started like 3 weeks ago, just doing what he does here :)

@prinskhal2008 3 года назад

Great work as always mate 👌

@JohnBuildsIt 3 года назад

I appreciate it!

@samanthashepherd6614 3 года назад

Very nice

@JohnBuildsIt 3 года назад

Thanks!!

@tj5376 2 года назад

Dang that’s nice

@JohnBuildsIt 2 года назад

Thank you!

@Zyr4n0 3 года назад

Not entirely sure how stable this bed will be against rocking movements..

@JohnBuildsIt 3 года назад

Doesn’t move any direction 👍🏽

@charlieodom9107 3 года назад

You could always put some wheels on it. Then, it would just roll back and forth!

@daveerickson5313 3 года назад

Well done. Not sure if you’re newer or what, but the number of subs seems low for the quality of video you’re putting out.

@JohnBuildsIt 3 года назад

I appreciate it! 👍🏽

@philshock3805 3 года назад

Totally agree - was just thinking the same thing. He's like a younger version of Jon Peters! :-)

@oneway1811 3 года назад

John I need the full size plans I love the bed it came out fantastic

@antonstafeyev3606 3 года назад

Dis paint.... man make a dedicated video on how to paint like a pro... really needs it :)

@haydenkerns7237 11 месяцев назад

I just don’t understand where you get that wood

@michaelonyango2077 Год назад

I loved this. Building a bed right now but usung a different design. I probably will buy this plan.

@MoniGhaleyDIY 3 года назад

This is exactly what I need. Thanks man. I’ll be building this bed next month. Was the legs pine?

@JohnBuildsIt 3 года назад

I used poplar for the legs

@MoniGhaleyDIY 3 года назад

@@JohnBuildsIt thank u.

@philshock3805 3 года назад

That looks really great, John! I'm beginning to really like the look of contrasting solid wood / white finishes. I built a free-standing kitchen cabinet a few years ago with a similar look - finished with a white base, solid Walnut top and black hardware and it came out awesome. It'd be great to build everything out of beautiful solid wood but it's just cost prohibitive for many people. Can't wait to see the rest of the pieces in the series! Did you do anything to finish off the bottom of the headboard like edge banding or just paint over the exposed sandwich of plywood and MDF? Certainly not necessary for the footboard since it's so low but depending on mattress height, I could see how the bottom of the HB could be exposed while lying in bed.

@JohnBuildsIt 3 года назад

No I didn’t do anything to cover it. With the box spring, the mattress comes a few inches up on the panel so it can’t be seen 👍🏽 thanks for watching!

@Gosa000 3 года назад

Been waiting for this video to come out ! Been following along on Instagram. Thanks John , excellent work as always.

@JohnBuildsIt 3 года назад

Thank you!!

@peterwiebe5576 2 года назад

hello john . Your videos looking very easy and nice . i have seen al your videos .and have buy one plan .it's helping me so much .thankyou very much . where do you buy all your moldings you use?

@JohnBuildsIt 2 года назад

These were all from Home Depot. They’re linked in the description 👍🏽

@CarlsontheOutdoorsman 2 года назад

Hey John! I'm curious, what size is your shop? Awesome work!

@JohnBuildsIt 2 года назад

Thanks! 24x32

@dylangardener1580 3 месяца назад

Did you cut all 4 sides for the tapered legs?

@JohnBuildsIt 2 месяца назад

Yea 👍🏽

@markusm6575 3 года назад

It's not the style of beds we have here in Germany, but I like it.

@patniemczyk8860 3 года назад

John really love your work bro. Looks amazing!!!

@JohnBuildsIt 3 года назад

Thank you! 🙌🏼

@ericorange441 2 года назад

How do you like dowel jig? I've been looking at them and for the price of that one it has some pretty good reviews. I know there is much better ones out there, but I'm on a tight budget.

@JohnBuildsIt 2 года назад

I don’t remember which one I used in this video haha but yes I like all the ones I use! A lot of times I’m mainly just using them as a straight drilling guide. So the Milescraft Drill Block is great for that too and only a few bucks 👍🏽

@chrisroyak4479 3 года назад

In the video, you mention previous projects planned in your head (I do the same). Was it easier to put it down on (digital) paper first?

@JohnBuildsIt 3 года назад

Nah I wouldn’t really say easier, and it’s more time consuming. I definitely do like being able to see the final design on the computer first and make any changes, rather than cutting and wasting real wood though

@chrisroyak4479 3 года назад

@@JohnBuildsIt You have a point...

@nickalft6352 3 года назад

Do stretchers sage any if I don’t add the cross slates. I have a split king xl beds that are motorized and I wanna church them up by wrapping this design around them.

@JohnBuildsIt 3 года назад

Yea I would add the slats and supports👍🏽

@jamessmith4881 3 года назад

Looks great! The taper with the cover is a very nice. Also, the Mirka gold sandpaper is the best I’ve used. Once I found that sample pack on Amazon, I was sold.

@JohnBuildsIt 3 года назад

Good price on it too! Now I just need one of their sanders haha

@colt2540 Год назад

May be dumb question do you need a box spring ?

@JohnBuildsIt Год назад

Probably depends on the depth of mattress, but yea they got a box spring to go with it

@colt2540 Год назад

@@JohnBuildsIt thank you ! So I’m halfway done building it but my old table saw is about at the end of its life and I messed up on the legs and there all about 1/8th inch smaller after planing them to get the saw marks out of the surface so now there about 2 3/8’s . I could just add that 1/8th to the side bed rail ? I’m thinking it may throw it off since I’m 1/8th under . I may just have to make new legs cause it may affect everything else

@TheFiown 2 года назад

I have all the wood to build my bed ( prices have doubled in a year! ) but my question is how deep to set the mattress into the frame so the sleeper doesn't end up sitting on the wood as the mattress sinks under the weight of sitting on the edge ? Half way down ? I don't want the mattress to sit on top of the frame as it will slide off. I like how you have planned to set yours in, looks about half way ? Thanks

@JohnBuildsIt 2 года назад

In this case they were using a box spring as well, so the support cleats are sunk all the way to the bottom. Really just depends on how thick and firm your mattress is! Halfway should be a safe bet though

@TheFiown 2 года назад

@@JohnBuildsIt Thank you. I actually bought a good orthopedic metal frame with adjustable spring wood slats as the base and for the moment a sping coil mattress as it's for a guest room and after buying the wood and the foam for the headboard I couldn't invest in a good Bultex mattress. The bed head and frame will be padded on top of various foam thicknesses. Although I live in a large old house in France the bedrooms are not wide enough for queen size beds. Given the price of lumber these days it's best to forget Bitcoin and stock wood ! Best Wishes

@MrChewy63 3 года назад

You are a true craftsman...nice job John!

@JohnBuildsIt 3 года назад

Thank you!

@holdemNE1 3 года назад

This video was incredibly well done which made it very enjoyable to watch. Thank you very much for posting your bed turned out phenomenal.

@JohnBuildsIt 3 года назад

Thanks a lot! 🙌🏼

@randallmoore4801 3 года назад

Do you have a set of plans for a full size

@johngunning2123 3 года назад

Top job and a great tip for painting using the two screws to allow the boards to be painted all over without any marks.

@JohnBuildsIt 3 года назад

Always helpful to save a lot of waiting time!

@nickmacias5737 8 месяцев назад

Awesome work, John! I’m about to start this project myself. On the legs, how did you get to 2&1/2”? Did you laminate 2x4’s then cut to size?

@JohnBuildsIt 8 месяцев назад

I used poplar, but yea! 👍🏽

@buddydodd6266 9 месяцев назад

I bought your plans for the entire bedroom suite. However, I'm having some issues with finding the materials listed. With the bed build what alternative for ash could I use? Or if you have a place I could purchase ash I greatly appreciate the help. Also as for the plywood...what kind exactly did you use in your build. Birch ect.?

@JohnBuildsIt 9 месяцев назад

I would either use birch or maple ply. Then for the hardwood you can use whatever you’d like! If you’re wanting something to stain grey, oak, elm, maple, poplar are all good options

@johnvodopija 3 года назад

A really nice project. The spray finish turned out great. 👍😎🇦🇺

@JohnBuildsIt 3 года назад

Thank you!

@chrisfollmer6315 9 месяцев назад

Where can I get the pull out work bench you have. I really need that for my shop. Btw I purchased your night stand plans a few months. Nightstands and now complete and I absolutely love it. I’m working on the bed frame now. Thanks man. Your awesome

@JohnBuildsIt 9 месяцев назад

The bora centipedes? There’s an Amazon link in the video description 👍🏽

@michaelleykum6989 9 месяцев назад

Great project and build! One question: what did you do with the bottom of the headboard, the raw plywood edge with the mdf? Left it as-is and painted?

@JohnBuildsIt 9 месяцев назад

Bondo and paint

@bradhendershot7362 Год назад

Hi John, I just bought your king size plans online, and I'd like to buy a mattress and box spring to go with it. Can you tell me what size mattress and box spring you used to finish the bed?

@JohnBuildsIt Год назад

It’s for standard King size mattresses, 76”x 80”

@bradhendershot7362 Год назад

@@JohnBuildsIt Thank you! Also, how well has the MDF trim held up? I worry about it chipping. Can I use poplar for the trim boards?

@GUNBATOSINHISNAME 2 года назад

Hi guys I'm gonna show you how I built this bed. OK SO WHAT I DID WAS...

@aaronconner2010 3 года назад

Another amazing build as always!! Beautiful bed and looks like a fun project

@JohnBuildsIt 3 года назад

Thanks man!

@jcarey65 3 года назад

Link to the full size plans doesn’t work. Love the bed, and video! Thanks for links!!

@toomars1301 3 года назад

Excellent! Thanks for posting...mineral spirit slip coat, I’ll give that a try!

@JohnBuildsIt 3 года назад

Only way I’ve had success with the product really 👍🏽

@toomars1301 3 года назад

@@JohnBuildsIt I agree...The shop where I work is the GF retailer for the area. We’ve had several discussions about the difficulty of working with this product.

@LindaMchone Год назад

I paid for a king size bed frame plan and upon loading it, a virus was introduced to my computer. I now have no plans and am afraid to reopen and try to download again. Can you help!

@JohnBuildsIt Год назад

That’s not good.. e-mail me and I’ll just send the plans directly.

@janodjano5828 2 года назад

Looking to build a headboard (haven’t had one for 10+ years) this year May try looking for a nasty door and see what happens…

@stevekeene4332 10 месяцев назад

what was size of the post after the taper when finished?

@snakedude61 2 года назад

Any chance for twin and full plans

@JohnBuildsIt 2 года назад

Maybe in a couple years when my daughter needs one haha sorry!

@snakedude61 2 года назад

@@JohnBuildsIt no problem. My 2 daughters rooms is exactly what I'm trying to do. I need twin beds when our basment gets finished here in a month or so.

@taylorhopson9740 3 года назад

So beautiful! Can’t wait to see the other pieces!

@JohnBuildsIt 3 года назад

🙌🏼🙌🏼

@SebastianGodoyMedel 3 года назад

Great project and nicely explained. Thanks!

@JohnBuildsIt 3 года назад

Thanks for watching! 👍🏽

@alexy6093 10 дней назад

Just curious. How long does it take to build this? Without painting.

@JohnBuildsIt 8 дней назад

Pretty quick really, 1 or 2 days

@sydswaine3627 11 месяцев назад

Wow! Beautiful! I will definitely build this in King size. Love the taper!

@arjunchandar7380 Год назад

Hi, thanks for the build. Im definitely thinking about getting the plan. One question i had is .. the mdf. Is that necessary or used for a particular reason? Or would 3/4 birch instead be an acceptable substitute? Please lemme know. Thank you

@JohnBuildsIt Год назад

Plywood would be great 👍🏽mdf just paints nicer in my opinion is all

@arjunchandar7380 Год назад

Thank you much for taking the time to reply.. definitely looking forward to building

@Doityourselfwithjoe 3 года назад

Awesome Job!

@JohnBuildsIt 3 года назад

Thanks! 👍🏽

@dartetov 3 года назад

Is there a tool brand you don’t have/use? So far I’ve seen makita, Milwaukee, dewalt and rigid. I thought I was bad. 😂.

@JohnBuildsIt 3 года назад

Not one brand makes the best of everything! 😉👍🏽

@dartetov 3 года назад

@@JohnBuildsIt I agree.

@Bone999999999 3 года назад

What wood should I use for the legs? At Home Depot or Lowe’s I can’t find 2 1/2” poplar square stock or even 2” boards to glue together. Would gluing 4-1” boards work? It seems like that would be too many boards.

@JohnBuildsIt 3 года назад

That’d be perfectly fine man! Believe it or not, gluing multiple smaller boards together is actually more stable and stronger anyway. Have you tried to google and find a hardwood dealer near you though? Would be a lot cheaper than a box store!

@danielbatten8960 Год назад

Excellent Build. I showed my wife and bought the plans as we are upgrading to a King Size Bed. Just curious, what type of wood did you use for the 2 1/2 Square Stock? I was thinking of using poplar to build the legs, but would like your insights on what you found to work the best. Thanks again! Love your channel!

@JohnBuildsIt Год назад

I used poplar. Maple or poplar for anything painted 👍🏽

@seephor 3 года назад

I'm going to buy your plans and build two of them for my kids. I think I can modify your plans for a twin size

@JohnBuildsIt 3 года назад

Nice! I was thinking the same thing for my daughter when it’s time

@congapilon 2 года назад

Nice job. Not to difficult but still requires some know how.

@snasearle 3 года назад

Thanks for making these plans available!

@JohnBuildsIt 3 года назад

You got it! 👊🏼

@norsamlida 3 года назад

Great job. Thanks for sharing 🤗

@JohnBuildsIt 3 года назад

Thank you! 🙌🏼

@charlieodom9107 3 года назад

I might have to build one of these! The wife and I have broken the last 3 beds we have owned. This one looks a bit tougher! It might be able to withstand some movement.

@mattbowers5342 3 года назад

Excellent work as usual, can’t wait for the rest of the suite!

@JohnBuildsIt 3 года назад

Thanks man!

@seephor 3 года назад

John I'm in the process of building two twin size for my kids like I mentioned earlier. Any advice on the width would be appreciated. I didn't know there were two sizes for twin mattresses. Some are 38" wide and some are 39". I'm shooting for 38.5" hopefully it works. I already got the head boards and foot boards done. Just need to cut the rails, attach the hardware and paint. Some changes I made are 1) I'm using oak for the caps, 2) I used 2x6 for the rails and raised them so there's no need for a boxspring. I also chamfered the side rails with a 45 for safety. I'm planning to make a sliding drawer that sits on wheels and rolls in a out. I'll post the photos on a message board and link them once I'm done.

@JohnBuildsIt 3 года назад

I’m not sure man, best bet would to get the actual mattresses first to be sure

@gojoe36 3 года назад

Switch to a PIN Nailer...you will wonder why you didn't do it before. The holes won't even hardly show. So much easier in finish work 🙌👍

@JohnBuildsIt 3 года назад

I have one haha just try to avoid the air compressor in videos. Waiting for Milwaukee to release the new cordless one!

@terryrobinson3016 Год назад

Best bed build on RU-vid. Brilliant well done.

@JohnBuildsIt Год назад

Thank you!!

@dhoops113 11 месяцев назад

I'm just discovering your channel and your videos are awesome. I'm going to try this build with a twin size while adding drawers on the sides for my daughter.

@JohnBuildsIt 11 месяцев назад

Awesome! Thanks for watching

@philipkrauss4988 2 года назад

That is really nice! Is this a build for new guy?

@thayson486 3 года назад

I'm from Brazil and I bought one of the projects in your store, I had difficulty converting the measurements to the metric system in (millimeters). I thought the project was very complete and I was very happy with the purchase, it would be very nice if you put up a project with the metric system (millimeters) for sale. Thank you very much for your work.

@JohnBuildsIt 3 года назад

I appreciate that! I actually think you’re the first person that has asked for metric haha! But maybe I would get more sales if I offered both. I’ll try to in the future

@mikesgarage5066 3 года назад

Awesome build man! Love your videos! One question- why not run a stretcher from front to back to support the slats in the middle instead of adding the 2x2's? My only thought was those might get in the way if you wanted to store anything underneath.

@JohnBuildsIt 3 года назад

Hmm I’ve never seen one like that haha but I’m liking the sound of it! 👍🏽

@Ackamemnon 2 года назад

thanks this is an awesome video, I am making a canopy bed with a carved lion head. i fleshed it out in 3D first and how the pieces will fit together.. still lots of work to be done.. also i want to put LED lighting... :) man it's exciting! 😍

@JohnBuildsIt 2 года назад

Awesome! Thanks for watching!

@kayfabe591 3 года назад

I'm seeing an upscale cottage vibe--versatile design--that I prefer. You've inspired a plan for a pair of square planter boxes in this style (maybe, a bit under the height of your footboard). Recent garden preps got me behind on my vids views 😕.

@JohnBuildsIt 3 года назад

That sounds nice!!

@mohammedjaffer8522 3 года назад

👍👍👍👍👍👍👍👍👍👍😊

@carpdude73 3 года назад

Great looking project! Loved it!

@JohnBuildsIt 3 года назад

Thanks Bill!

@kevinbudke8438 3 года назад

Very nice looking bed. Good job.

@JohnBuildsIt 3 года назад

Thanks!

@piofthings Год назад

Very nice build. I think this has given me all the ideas I need for a slightly smaller than queen sized bed. Thank you. Also, many thanks for using bed rail clamps instead of pocket screwing everything 😂

@JohnBuildsIt Год назад

Haha thanks for watching!!

@teengraving Год назад

Bed looks great!! Just got the plans. Why did you chose to use plywood and mdf for the head and foot boards instead of just mdf?

@JohnBuildsIt Год назад

Just more rigid in my opinion. Could definitely go all mdf though 👍🏽

@zack78651 3 года назад

Look awesome can’t wait to get Your plans and start make one myself. Do you have a link for the clamps for the taper jig? Also any issues with the frame hardware with any creeks and noises with the boxspring and mattress on?

@JohnBuildsIt 3 года назад

Clamps are linked in the description 👍🏽 and no this is the most solid and quiet bed I’ve ever been around haha. I’m sure it depends and could make some noise depending on how good the hardware is installed, but not gonna lie, I nailed the fitment and they’re perfectly tight haha

@ВасильМаркевич-й8о 2 года назад

👍👍👍👍👍👍👍👍👍👍👍

@Alphasig336 6 месяцев назад

Where do you buy poplar 2x4s?

@JohnBuildsIt 6 месяцев назад

Local hardwood dealer

@lynjermey6423 3 года назад

Looks gorgeous. Love the tapered legs as well.

@JohnBuildsIt 3 года назад

Thank you! 👍🏽

@HypnoticThoMalaGo Год назад

Hi, awesome work, but what kind of wood use for this project ?

@JohnBuildsIt Год назад

There’s poplar, ash, mdf, plywood, pine trim.

@HypnoticThoMalaGo Год назад

@@JohnBuildsIt Thanks ! i purchased your queen bed and night stand plans but i dont understand anything at all imperial system lmao

@Pch-bb6sn 3 года назад

The best👏👍

@RG-fc9hh 3 года назад

Do you have the drawings set or sketch with the material list need for this project ? Never mind I just saw the description , cool stuff man great craftsmanship

@JohnBuildsIt 3 года назад

Thanks for watching! 👍🏽

@tupelowoodcarver1785 2 года назад

Been watching your builds since the flags…you’ve come a long way in a short period of time. Great designs, and great content. Keep ‘em coming!!

@JohnBuildsIt 2 года назад

Thanks!!

@arielalejandrito 3 года назад

Awesome job John I myself I want to build my bed. Can I use 3/4 plywood instead of poplar ?

@JohnBuildsIt 3 года назад

Of course!

@kelewaekreation Год назад

I just found your channel and love your bedroom set. I showed to my wife and she loved it as well. The only thing we are trying to decide is if we are going to stick with the grey or go with black walnut tops. Great work!!!

@JohnBuildsIt Год назад

Love the walnut look too!