Тёмный

Beginner Guide // How To Build Budget Micro FPV Drone kit 2019 - Eachine Tyro69 

Drone Mesh
Подписаться 97 тыс.
Просмотров 189 тыс.
50% 1

PCBWAY Best Place for PCB's: pcbway.com
10% OFF Tyro69: BG10TR69
Eachine Tyro69: bit.ly/2kgvWVf
Soldering Iron: bit.ly/2xR2zM9
Hex Tools: bit.ly/31KA93c
Heat Shrink: bit.ly/2xR2zM9
Consider Following me and supporting on Patreon.
/ dronemesh
----------------------------------------------------------
-- TOP 30x30 4in1 ESC --
Aikon AK32
BG: bit.ly/2uSBI0O
GetFPV: bit.ly/2FU854b
RDQ: bit.ly/2YVkL3K
Tekko32 Metal
BG: bit.ly/2G5VfRC
GetFPV: bit.ly/2VsroYV
RDQ: bit.ly/2UF3WKU
T-Motor F55A
BG: bit.ly/2JIdAo1
GetFPV: bit.ly/2P2i8sp
RDQ: bit.ly/2I3D69n
T-Motor F45A
BG: bit.ly/2CZe9IP
GetFPV: bit.ly/2D3g2U3
RDQ: bit.ly/2YZmCof
Dalrc Rocket
BG: bit.ly/2O5Pcxc
GetFPV: bit.ly/2WQ8Imk
RDQ: bit.ly/2Kg0EKe
-- Best 20x20 4in1 ESC In Order From Best --
HGLRC Forward
BG: bit.ly/2CM2oEG
GETFPV: N/A
RDQ: bit.ly/2GfMKDQ
Aikon AK32 Mini
BG: bit.ly/2Yu2E4p
GetFPV: bit.ly/2KlKlLU
RDQ: bit.ly/2KfQ6KV
Airbot Ori32
BG: bit.ly/2UTK2JF
GETFPV: bit.ly/2KlLfrM
RDQ: bit.ly/2U94tRe
Need Help with something?
dronemeshforum.com
Make sure to sign up to the newsletter and create an account to not miss big insane sales.
shopdronemesh.com
Android APP
play.google.com/store/apps/de...
IOS APP
itunes.apple.com/us/app/drone...
Follow me on Facebook
/ dronemesh
------------------------------------
I highly recommend these products if unsure
Tekko32
bit.ly/2NwffxB
kakuteV2 AIO
bit.ly/2CxQct0
Hakcrc (Best Budget ESC)
bit.ly/2OgrOlO
25km Range on these awesome VTX's
FX2
goo.gl/8PswEP
X2
goo.gl/VsDZ6n
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
bit.ly/2NwBVxt
Batteries I use
bit.ly/2PlCvQn
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
bit.ly/2CwG17Z
Xt60 Premade I use
bit.ly/2Pmf89j
Heat shrink I mentioned
bit.ly/2PkrVcA
Soldering station
bit.ly/2zZP9za
Contact: mesh.drone@gmail.com
---------------------
Song Used
/ living-in-stereo
------------------------------------
Song Used info
Track was provided by NoCopyrightSounds
Paul Flint - Savage [NCS Release]
• Paul Flint - Savage | ...
Paul Flint
• / paulflintmusic
• / paulflintmusic
• / paulflintmusic
• / paulflintmu. .
• Mastering by redwolfmastering.com
Song: Distrion & Alex Skrindo - Lightning [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Distrion & Alex Skrind...
Download/Stream: ncs.io/LightningYO
ID: dj2938hd298hflahsknckdfhsidufh9398

Наука

Опубликовано:

 

2 сен 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 172   
@tiberiocellini3641
@tiberiocellini3641 4 года назад
Man, that intro 😂
@jujuflores6799
@jujuflores6799 3 года назад
lol that’ll be good hmmmmmm 🤔?
@treylon_sprayart
@treylon_sprayart 2 года назад
Was the best 😆
@DroneMesh
@DroneMesh 4 года назад
10% OFF Tyro69: BG10TR69 Eachine Tyro69: bit.ly/2kgvWVf Soldering Iron: bit.ly/2xR2zM9 Hex Tools: bit.ly/31KA93c Heat Shrink: bit.ly/2xR2zM9
@will3377
@will3377 3 года назад
"That's what she said!" Lol. Great video and gives me some confidence to try this out. Clear instructions.... Great job!
@shoeshine4nep2ne
@shoeshine4nep2ne 2 года назад
I think of all the ppl doing build guides on RU-vid, you are my fav! And I find your voice very soothing. Also,y ou are very informative and your knowledge in PCB"s really shows. It's really cool when you talk about the different components on a board and what they do. Keep bringing in the great content. And I know you will. [Flywoo Explorer LR4 V2 | Seth, 37 / FTL, FL]
@noelvermillia
@noelvermillia 4 года назад
Thank you very much! Never built a drone myself but this looks like an easy to follow step-by-step instruction. Wish it would have a split camera for onboard video recording.
@hakancakirkan2319
@hakancakirkan2319 4 года назад
I am experienced in building quadcopters but I still love watching build videos :). This is a very nice build video I enjoyed
@jesuscalvin2130
@jesuscalvin2130 2 года назад
sorry to be so off topic but does anyone know a trick to log back into an Instagram account..? I somehow lost the account password. I would love any assistance you can offer me!
@davidjaxx8414
@davidjaxx8414 2 года назад
@Jesus Calvin instablaster ;)
@jesuscalvin2130
@jesuscalvin2130 2 года назад
@David Jaxx thanks for your reply. I found the site through google and im in the hacking process atm. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@jesuscalvin2130
@jesuscalvin2130 2 года назад
@David Jaxx It did the trick and I actually got access to my account again. Im so happy:D Thanks so much you saved my account !
@davidjaxx8414
@davidjaxx8414 2 года назад
@Jesus Calvin you are welcome :)
@svensfpv433
@svensfpv433 4 года назад
rx fits nice and easy under the whole stack right on the frame with shrink tube and then glued
@DoktrDub
@DoktrDub 2 года назад
Great build, little tip though, you should always tin (add solder) to your soldering iron tips regardless of temp, which will help with lifespan and protection from oxidation long term.
@westsenkovec
@westsenkovec Год назад
Flux would be great too along with a smaller tip.
@brodylindsay8760
@brodylindsay8760 4 года назад
What receiver would you recommend with it. And where should I put it in placement
@pouria3132
@pouria3132 4 года назад
Thank you for this great video. Can I ask something? How and where can learn about brogramming and design flight controller with stm32
@dogjennings1171
@dogjennings1171 4 года назад
Great video, can you do some flight footage with 2S and 3S packs?
@gorace71
@gorace71 4 года назад
Great job mesh man. Keep this content coming
@yodayedi2325
@yodayedi2325 4 года назад
Great job, interesting to watch, can´t wait for fly footage and your opinion.
@russkydeutsch
@russkydeutsch 3 года назад
Never use water to clean the soldering tip. This causes drastic temperature changes which can damage the tip.
@DoktrDub
@DoktrDub 2 года назад
No, professionals everywhere use very lightly damp sponges and brass wool in combination, you aren’t going to harm the lifespan of the tip doing it properly
@Raven187FPV
@Raven187FPV 4 года назад
With a pod this thing will be a beast
@shadow7037932
@shadow7037932 3 года назад
Hey mate, found your video while looking to build a toothpick quad. Are there newer kits you'd recommend or is this still a solid choice?
@collinsnjarara3352
@collinsnjarara3352 4 года назад
Awesome video 👍 and build. Do more of this.
@jebrc
@jebrc 4 года назад
Man bro I have been waiting in this review build video that no you so much bro
@kiethensoy1441
@kiethensoy1441 3 года назад
Nice video, perfect idea, im gonna try to assemble one of this
@namerre
@namerre 4 года назад
Really cool video, thanks! Can you recommend a cheap controller I can use with this? Is that compatible with any drone controller? I ask as I have many drones such as TIANQU VISUO XS809S etc.
@mailmescoobz
@mailmescoobz 4 года назад
Excellent but I'm terrible at Soldering is there a FC with plugs for the same build
@lucascqs
@lucascqs 3 года назад
I'm thinkig about building a tiny cinewhoop with the Tyro69 parts. Do you think I can use a Beta85 or a Beta95 frame with it?
@iliaperez4734
@iliaperez4734 10 дней назад
What other kind of receivers do ur recommend for express elrs thx
@Tonynux
@Tonynux 4 года назад
This tutorial could not be better! Thanks for speaking a very clear english, so even people who english is not their native language, can understand you!
@jofifpv
@jofifpv 4 года назад
Great video! Thanks! Could it carry a Caddx Turtle V2? What d You think?
@Ray_Piste
@Ray_Piste 2 года назад
I have a dx8 and thinking about getting this is there a receiver that size compatible with my transmitter
@raalexander8708
@raalexander8708 Год назад
Hei, is it possible to build a dji mini 2 like drone? Like not a FPV drone but a normal cinematic drone? Thanks I’m advance
@Shinobi117
@Shinobi117 4 года назад
What if I use ibus? Do I still have to bridge the pads for SBUS?
@SashoS91
@SashoS91 3 года назад
Bro, I want to build a small drone for fishing. To drop a payload of 8 ounces. Can it be done ?
@jordanbass3210
@jordanbass3210 4 года назад
Bro you should have let that intro play that was dope lol
@SeeFPv-qm6ie
@SeeFPv-qm6ie 4 года назад
cool I just ordered one i'm glad you made a video can you make another video of you flying it.
@muppetpaster
@muppetpaster 3 года назад
ordered one too with jumper receiver for 49 euros all in.....delivered within 3 days....
@AlvaroGomes
@AlvaroGomes 2 года назад
Can I use this receiver with this kit? Flysky IA6B i-bus receiver + flysky 10ch 2.4Ghz FS-i6x Transmitter
@master-azazel
@master-azazel 3 года назад
arent the holes on the pads of the receiver meant to put the wires through to make a nicer connection?
@karel3880
@karel3880 4 года назад
So where do the yellow, red, and wire go when I have i bus ? Please can someone answer my question I'm very confused cause I'm new.
@jaunie8217
@jaunie8217 4 года назад
I want to build this....What remote transmitter will work with this? If I need to flash...any links on how to do it?
@staceysmith-gd3zv
@staceysmith-gd3zv 2 года назад
Heat resistant tape shields help & a vary lil bit goes a long way
@bman9469
@bman9469 4 года назад
Are the battery leads and capacitor leads connected at the same terminal?
@MCsCreations
@MCsCreations 4 года назад
Really nice little quad, Sam! Great job! 😃 Looking forward to the flight video! 😃
@chandankalyanmh4089
@chandankalyanmh4089 3 года назад
sooooooo nice i expect many from u we support youu....sooo nice very very very very detailed information greattt jobbb
@ballou1777
@ballou1777 2 года назад
If I start building drones Do I need to buy a 3-D printer?
@sams0748
@sams0748 2 года назад
Can I use a dsmx reciever with this? Thanks
@ev0ke676
@ev0ke676 4 года назад
Do i need this low esr capacitor because i want to build a drone and i want to buy the parts and have to know it
@noname-wo9yy
@noname-wo9yy 4 года назад
With the capacitor i simply covered the two wires in super glue as its none conductive
@rickjames8897
@rickjames8897 4 года назад
My ts100 screen runs super dim or not at all. I have no idea what's going on
@tbiowa9977
@tbiowa9977 4 года назад
So now I know how to build. This means nothing if you still do not know how to set up your radio and program the board. Great video showing the building of the kit. Wish you would have shown the rest of what it takes to get it into the air.
@DroneMesh
@DroneMesh 4 года назад
Check my latest video on the channel.. It's what your looking for
@biscuitmufflers2351
@biscuitmufflers2351 3 года назад
I have cheap drones from target. Can I use those controllers for this?
@darkreddust2135
@darkreddust2135 3 года назад
I'm just getting into FPV Drones. Are there any cheap lipo chargers or are they all expensive because I can only find chargers that cost like 70$
@sachithraperera4250
@sachithraperera4250 2 года назад
Hi, I am a beginner to this. How would you know what motor wire goes to what pin? 9.31min
@yusufhanif6790
@yusufhanif6790 3 года назад
Simple but complete.....👍👍✊✊✊✊🇸🇩🇸🇩🇸🇩
@gsanjeevkumar
@gsanjeevkumar 4 года назад
Great videos. Very inspirational and informative. I am a NOOB and like DIY. In here there is no RC you mentioned. Which one you recommend. Help soon I am excited to build this weekend.
@lazyplumber1616
@lazyplumber1616 4 года назад
You can use any rx that is sbus that will bind with your tx, recommend using a mini rx. Frsky or Flysky...I use flysky because it was the least expensive when I started this hobby...not the best but it works.
@yannickg6904
@yannickg6904 4 года назад
Having a 20x20mm stack is a plus, many 26x26mm boards are hit or miss.
@joshuaz3416
@joshuaz3416 2 года назад
What is the name of the solder gun? Where did you buy it from?
@RBIBIANO
@RBIBIANO Год назад
Bom trabalho. Mas onde está a lista de material?
@mani-00
@mani-00 3 года назад
is it possible to adjust the camera angle??
@tigertom53
@tigertom53 4 года назад
I'm wondering if I should get a happymodel larva or this? And what will the best batteries and props? Seen the Tyro69 for around $62..🤔🧐😎
@yordankrushkov8488
@yordankrushkov8488 4 года назад
Same dilemma here
@XxNeoSamusxX
@XxNeoSamusxX 4 года назад
i have one tyro69 and it make me lot of problems, at this moment it can't fly...also, in this video you can't see where he put the receiver inside the frame, it's because it don't have place!... ibus configuration it's different... parts are whit badd quality...it don't think about this, Larva is the best option whit better camera and dvr + 200mw vtx
@Sinalsa
@Sinalsa 3 года назад
Does it matter how to connect the motor wires?
@Hellmuthsilva
@Hellmuthsilva 4 года назад
Cool build
@zacplunkett8490
@zacplunkett8490 3 года назад
Nice to see someone bridging the solder properly.. nobody has applied proper techniques when applying solder that ive seen.. great job xD
@Theubershadow
@Theubershadow 3 года назад
Soldering properly? the Motor wires barely even are connected to the esc. it might work, but a solid solderjoint looks way different
@xcruell
@xcruell 3 года назад
did you 3d print that part with a 3d pen??
@BarefootBeekeeper
@BarefootBeekeeper 4 года назад
Nice job, but the way you have soldered those motor wires means that you will have to dismantle the whole thing when you (inevitably) discover that one or more motors are spinning the wrong way!
@taxi-ko7vg
@taxi-ko7vg 4 года назад
Phil Chandler - Barefoot Beekeeper then you use blheli to switch the direction?
@BarefootBeekeeper
@BarefootBeekeeper 4 года назад
@@taxi-ko7vg ah, I've only used more primitive software so far.
@elanrider
@elanrider 4 года назад
Thanks for the video. Good advice. Have you tried different tip (conical) for that iron? It's much easier to work with smaller soldering jobs then the chisel type (default).
@goldenauradesignagency
@goldenauradesignagency 4 года назад
If I were to use this for filming landscapes, what camera would you recommend/what 4K video camera can this handle? And yes unfortunately I need 4K for real estate but I want to have something I can get amazing swooping shots with.
@neonoir__
@neonoir__ 4 года назад
Golden Aura Design Agency you would need a 5 inch quad to hold a 4k camera like a hero 7. This is way too small for that. With a 5 inch you will also get much more stable video with less random vibrations
@goldenauradesignagency
@goldenauradesignagency 4 года назад
@@neonoir__ But like the Tarsier and stuff?
@kcpab
@kcpab 4 года назад
Can i put onne 4s 1000mah on it ?
@kenzielalande3976
@kenzielalande3976 4 года назад
Where do you put the battery
@Waikhom007
@Waikhom007 2 года назад
where is the second part of this?
@jzncoffeemug
@jzncoffeemug 3 года назад
Does anyone know how to connect the drone to a controller or phone?
@laytonblance
@laytonblance 4 года назад
What did you end up doing to keep the camera and vtx in place? the vtx I'm not too worried about but the camera is pretty loose in the 3d printed holder and I'm afraid it will start bouncing around mid flight. Thanks for making this video, I really appreciate it!
@NguyenNguyen-pf2pf
@NguyenNguyen-pf2pf 2 года назад
How to mount gopro on that thing
@doktordrone
@doktordrone 4 года назад
Thank you very much for sharing this useful guide for beginners like me. Have a nice day and best wishes for you 🙏🙏🙏❤️🍻🍻
@Wealthy_cyclops
@Wealthy_cyclops 2 года назад
You forgot to mention to not breath the solder smoke in
@mixphoenixfurfest6062
@mixphoenixfurfest6062 Год назад
Can you put links for the parts thank you😁
@Darksagan
@Darksagan 4 года назад
Nice video.
@tigertom53
@tigertom53 4 года назад
Awesomeness 😍👍👌
@SilverTopFlyer
@SilverTopFlyer 4 года назад
Well done my brother....you have given me the confidence for my first build. Great job. Very clean build.
@parttimejobgowtham5267
@parttimejobgowtham5267 3 года назад
Intro is very super
@shade_chessey9392
@shade_chessey9392 4 года назад
Link to the reciver?
@Memeonly165
@Memeonly165 5 месяцев назад
What's the camera name?
@mikebergman1817
@mikebergman1817 4 года назад
"That's what she said."lost my damn mind dude LMAO
@neon3d602
@neon3d602 3 года назад
can someone link me a controller and recever unit plz
@user-md5ep8il9d
@user-md5ep8il9d 3 года назад
please tell me this drone build parts..?
@aecrim1969
@aecrim1969 4 года назад
First crash upside down and it is a goner!
@cancel2368
@cancel2368 4 года назад
can you make a list of your kits used and where to buy them
@DroneMesh
@DroneMesh 4 года назад
It's all linked in description.
@cancel2368
@cancel2368 4 года назад
@@DroneMesh some of the links are not working and there are just too many links confusing me which one are the to your equipment used
@SirPaulB
@SirPaulB 4 года назад
Great build video! In my opinion u use way too much solder, there were couple of close calls, too high temp and touching too long for such a small, cheap board. Great job anyways
@danielschaefer9586
@danielschaefer9586 4 года назад
Could I put a ski camera on this or no?
@danielschaefer9586
@danielschaefer9586 4 года назад
If not any recommendations
@lukas3643
@lukas3643 4 года назад
Can I actually use this fpv camera on my Smartphone with an UVC OTG 5.8G 150CH Diversity Audio FPV Dual Antenna Receiver? I would love to know this, just as much I love your Videos, keep it up bro
@aurisfpv3201
@aurisfpv3201 3 года назад
you have to get a vtx for an fpv camera and yes you can use it with a smartphone, but the latency is high
@riverasod
@riverasod 4 года назад
can i get the list of tools and parts emailed to me
@digvijaychougale3770
@digvijaychougale3770 4 года назад
What's the cost of all components ???
@hexbinoban6170
@hexbinoban6170 2 года назад
Lol, from spider drone to flying drone what a metamorphosis.
@jmtv4138
@jmtv4138 Год назад
How to add a gps on that drone
@eagle7015
@eagle7015 2 года назад
Ok that intro caught me off guard
@crycodm7622
@crycodm7622 2 года назад
yes yes yes im 12 and i have been saving money so i can buil my own fpv drone
@lilianamarinospino4953
@lilianamarinospino4953 4 года назад
Deberias poner en los subtitulos en español xfa
4 года назад
That's what she said :D
@joaovitorsantosbraga46
@joaovitorsantosbraga46 4 года назад
Ajudou de mais 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
@quentincampbell5865
@quentincampbell5865 4 года назад
Very nice explanation with the soldering for beginners. And dealing with solder splatter. But please clean the solder blobs off your workspace before carrying on. They can still stick to your work piece, like from static electricity.
@eccomi21
@eccomi21 3 года назад
Damn dude I still feel like I skipped half a year of drone school.
@jupiterjs031
@jupiterjs031 4 года назад
On this drone. Can I load Action Cam ?
@DroneMesh
@DroneMesh 4 года назад
You can load a runcam split 3
@jupiterjs031
@jupiterjs031 4 года назад
@@DroneMesh Ok good! Thanks.
@r3d33m3dn78
@r3d33m3dn78 4 года назад
Bro, looked like you were slopping solder all over the chips. Heat the pads, introduce the solder to the pads. When the pads are hot enough it will draw the solder onto it. You have much more control than shoveling it off of the tip. JS
@entertainmentunlimited3256
@entertainmentunlimited3256 2 года назад
I have watched this full video of your many time and after completing remembering it and went to find parts than I found that it is no $70 built, it is double the amount
@mdoutdoors.8481
@mdoutdoors.8481 3 года назад
mobula 7 or this
Далее
#kikakim
00:11
Просмотров 4,8 млн
TRY NOT TO LAUGH 😂
00:56
Просмотров 9 млн
١٢ يونيو ٢٠٢٤
0:12
Просмотров 6 тыс.
Beginner Guide // How To Build A FPV Drone 2019
33:54
How to make Fpv drone at home. #fpv #fpvdrone #drone
11:50
How To 10 FPV Freestyle Tricks | LEARN THESE FIRST
29:03
How to Start Flying FPV DRONES in 2024
13:01
Просмотров 451 тыс.
НАШ ЛЮБИМЫЙ КЛИЕНТ
1:00
Просмотров 450 тыс.
Дени против умной колонки😁
0:40
ВЫ ЧЕ СДЕЛАЛИ С iOS 18?!
22:40
Просмотров 71 тыс.