No video :(

Beginner Pottery Wheel - Bottles Part 1-Throwing and Trimming HD 1080p

Подписаться 9 тыс.

Просмотров 8 тыс.

50% 1

Join me in my home pottery studio. This video is part 1 of a 2 part series about throwing and trimming small bottles / vase on the pottery wheel. In this episode I am showing step-by-step how to throw, trim and add carved details to a couple of bottles and is geared to a beginner on the pottery wheel. By creating varied details on your pots allows for the glaze to pool and create interesting movements on your finished piece. I hope you enjoy!
WATCH NEXT:
Glazing Pottery for Beginners, Bottles Pt 2 - Glazing 4 Bottles, 4 Ways: • GLAZING POTTERY for Be...
How to Create Beautiful Glaze Drips - Glaze with me:
• GLAZE LAYERING - Glazi...
LINKS to TOOLS USED:
XIEM Sgrafitto Detailing Tool Set:
US Link: amzn.to/3pDWOgG
Canadian Link: amzn.to/3xqOoeZ
MUDTOOLS DRAG TOOL:
US Link: amzn.to/3JGYdv1
Canadian Link: amzn.to/3cBpn7d
MUDTOOL SPONGES:
US Link: amzn.to/32QHVyn
Canadian Link: amzn.to/3pEdN2n
MUDTOOL CUT OFF WIRE:
US Link: amzn.to/3FHZgs5
Canadian Link: amzn.to/3Jx8Hg8
MUD TOOLS STARTER SET! GREAT VALUE AND I USE THEM ALL
INTERNATIONAL LINK:
amzn.to/40f3gtB
XIEM TOOL SET:
amzn.to/3MQxkbN
DISCLAIMER:
Please be advised that the links provided are affiliate links and I may get a small commission from qualified purchases. This is at absolutely no extra cost to you!
If you are enjoying my content please consider subscribing to my channel, share this video and channel and don't forget and leave me a comment, ask a question or just say hello! By the way I answer each and every comment and love hearing from you! If you really enjoyed my videos consider supporting me further, click the link below, you're not really buying me a coffee but rather it's a link to a site that supports artist where you can show your support in a different way.
Thank you for watching my videos! xo
☕️ TO HELP SUPPORT MY CHANNEL www.buymeacoff...
☺️FOLLOW ME ON INSTAGRAM / sarah_walton_pottery
🎁MY AMAZON WISH LIST www.amazon.ca/...
🛍 WEBSITE www.sarahwalto...
#beginnerpotterywheel #beginnerpottery #pottery #potteryathome #potterywheel

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@21sesw 7 месяцев назад

Really helpful voice over for beginners and intermediate!

@SarahWaltonPottery 7 месяцев назад

I'm so glad it was helpful!! 🥰

@debramcleod538 3 года назад

I like the way you did this video I appreciate the 2x speed with the voice over.

@SarahWaltonPottery 3 года назад

Thank you Debra! I appreciate your feedback

@janlewis9099 3 года назад

I love the shape of the bottles and the carving especially the random carving. The glaze will break beautifully over it.

@SarahWaltonPottery 3 года назад

Thank you Jan!

@liianabanana6320 6 месяцев назад

You should be sponsored 😜

@SarahWaltonPottery 6 месяцев назад

🙏🏻🙏🏻🙏🏻 Thank you!! One day!! 🥰

@yourbeamofsunshine Год назад

I hope you keep making videos. I am just starting.

@SarahWaltonPottery Год назад

I’m in the process of editing one right now. Almost done , but have to film and take photos..I absolutely plan on making videos. I really enjoy it! What is your favourite videos? Do you have any suggestion for me for future content?? Thanks for watching and supporting me ☺️

@yourbeamofsunshine Год назад

@@SarahWaltonPottery Awesome. I learn more from your kiln glazing and unloading videos than anyone else.

@Elizabeth-mo3fv 11 месяцев назад

i start my first wheel work class tuesday! wanted to do this forever. u r a good teacher. keep it up.

@SarahWaltonPottery 11 месяцев назад

So exciting!!! You will love it!!!! Remember, it can be frustrating, but stick to it, slow steady hands, no jerky movements!! oh and thank you so much!! 🥰

@Counselingforlife Год назад

Nice video!! 😊

@SarahWaltonPottery Год назад

Thank you 😊

@BIJONGIRL 3 года назад

Thanks. Real time, you can always fast forward if you desire.

@SarahWaltonPottery 3 года назад

Thank you for this feedback!

@katharinelloyd5293 2 года назад

I appreciate the way you identified the carving tools 🛠

@SarahWaltonPottery 2 года назад

Thank you! 🥰

@Alaineolier-zs5bd 9 месяцев назад

I found the Garrity tool.

@AlpacaRenee 2 года назад

Love the pebbly texture! Love your videos!

@SarahWaltonPottery 2 года назад

Thank you!!! ☺️🤗

@renzomarsanochumbez3571 3 года назад

Great thanks from Lima, Perú.

@SarahWaltonPottery 3 года назад

Hello Renzo from Lima, Peru!! Thanks for watching!!

@Hipsterchick77 3 года назад

Your videos are great! Thank you for sharing with us! 😀

@SarahWaltonPottery 3 года назад

Glad you like them!

@my_alchemy 2 года назад

Great video!

@SarahWaltonPottery 2 года назад

Thank you Shawna! 🤗

@ECBurt 8 месяцев назад

I'd love to make an oil/soap dispenser, but how do you measure the opening, taking into account clay shrinkage, for the diameter stopper to fit correctly???

@SarahWaltonPottery 8 месяцев назад

Hi! I have since worked out that my clay needs 1" diameter for my soap dispenser and ¾" for my oil stoppers. I use a calliper to measure the stopper, then work out roughly 12-13% shrinkage and it seems to work for me now.

@kdwalters4146 3 года назад

No preference really---but do love the voice over. You offer us an inside understanding of where your thoughts are going, even when there are "happy accidents" of which I make all the time...some not as happy as others. But nice to see someone else making them as well. Very novice/new to throwing, have hand built for a while and trying the wheel now. Thank you for the video----

@SarahWaltonPottery 3 года назад

Thank you for sharing your feedback. As I am a new channel and trying different things out I appreciate hearing people's preferences. I'm still learning how to film an edit to provide valuable content so thank you for taking the time to stop and watch my videos as well as introduce yourself by way of your comments!

@kdwalters4146 3 года назад

@@SarahWaltonPottery you are doing a great job. Not sure why my text is struck out above but hoping you get the gist. We love your videos.

@Alaineolier-zs5bd 9 месяцев назад

Thank you Sarah for your videos. Where can you get I think you said Gary tool and the crystal that you use for burnishing ? Thanks

@SarahWaltonPottery 8 месяцев назад

Hi Alaine! Im sooo happy you enjoyed my video...that was an old one...Im glad to hear that you found the Garrity Tool, I have a few of them but I use the round one the most! The crystal i use is one that I've had for eons, but you can get them at crystal shops, check google for crystals near me...you'd be amazed! Maybe even try amazon,

@jademckay-robinson8447 3 года назад

brilliant video! thanks for sharing xx :)

@SarahWaltonPottery 3 года назад

Thank you Jade!

@dhatchellsd 3 года назад

I love that carving. What is that tool that you are using? Looks great. Thank you for sharing.

@SarahWaltonPottery 3 года назад

Hi Debbie! Thank you so much! It’s called a Drag tool by Mudtools one end is wider then the other so you get a little variety in your carving 😊

@rustydogpottery 6 месяцев назад

How much bigger do you make the necks to except the spouts?

@SarahWaltonPottery 6 месяцев назад

During this video I made all the holes too big! Whoopsie! I now look up my clay shrink rate, which is available from the supplier, and add that percentage to the final size. In other words, I measure the cork/stopper I intend to use, then add anywhere from 12-14% (depending on the clay) to the end measurement to account for the shrink... hope that makes sense. 🥰

@loreliemiller628 2 года назад

Missing your videos! Hoping your doing okay.

@SarahWaltonPottery 2 года назад

Hi Lorelie! I feel so terrible that I haven’t uploaded anything in such a long time, totally unexpected that this break would be like this! But the good news is, I did record some footage and now I need to edit…so I’m getting back on track! Thank you for your concern, yes I went through a lot but I am doing much, much better💕💕💕

@loreliemiller628 2 года назад

@@SarahWaltonPottery oh no worries! Sorry to hear but so glad you’re doing better! We all have bumps in the road of life! Take care of yourself!

@SarahWaltonPottery 3 года назад

Hi Everyone, when you watch pottery videos do you prefer videos in 'real' time or the 2x increase speed? I know everyone is different, and at different skill levels, so hearing from you will help me with future videos, let me know your preference and why? Thanks!

@analepa5 2 года назад

I'm still new and prefer real time. I'd like to watch you center, open, and pull the walls. Thanks!

@SarahWaltonPottery 2 года назад

Thanks Anne, I appreciate the feedback…oh and thanks for watching..cheers 😊

@katharinelloyd5293 2 года назад

I often skip ahead while you’re doing the routine throwing, but I’m fine with that. And I know that newbies often like real time. I would have spritzed that bottle’s top just a bit so I could carve it better. I do mostly hand building these days - pinching & slabs. Keep up your good work!

@laurajbrown78 2 года назад

Lovely! Where did you get that stick sponge? I keep looking for one and am having a hard time finding one! I'm in Canada too.

@SarahWaltonPottery 2 года назад

Hi Laura! Thank you!! As for the stick sponge, I couldn't find one that I liked, so i made it. I saw a video a long time ago on RU-vid, but honestly I can't remember who it was, which gave me the inspo to make one. maybe one day I'll do a video too ;) Thank for reaching out and for watching! Cheers

@ECBurt 8 месяцев назад

Highwater Clay. Great little tool.