Beginner Series Introduction MatrixGold User Interface Command History Command Prompt and Ribbons

Подписаться 3,8 тыс.

Просмотров 9 тыс.

50% 1

This will be the first of the Beginner Series Matrix Gold videos. I will continue to upload higher level content as well but did want to get this started for individuals that may need it started.
In this vide we will look at the User Interface inside Matrix Gold, the Command History option, The Command Prompt options and the Ribbon tabs a little. It will just be a quick run through on the program to get you more aware of the interface. I have a hidden secret in the video and for those of you who find it I think you will really enjoy using it as you work with Matrix gold. Thanks for watching and all your support. If the content is useful to you be sure to hit the subscribe bell, tap like and leave a comment. Also, don't hesitate to share the video with others in order to help them as well. Good designing.
If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports and then maybe level up to a faster and higher priced printer. Keep your cost low to start until you become familiar with everything that 3D printing has to offer.
Anycubic Printers and resins:
shareasale.com/r.cfm?b=138449...
discount code: www.shareasale.com/u.cfm?d=11...
Other videos that may be useful:
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• MatrixGold Add a unde...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
/ @donsjewelrymakingandj...
@donsjewelrymakingandjapantrave
#jewellery #jewelry #jewellerydesign #3drendering #jewelrydesigner #designer #customjewelry #finejewelry #howtomakejewelry #howtodesignjewelry #howto #caddesign ##3dprintingdesign #3dshoftware #howtodesignjewelry #cadtutorials #3dtutorial #howtomakejewelrytutorial #jewelrymakingtools #highfashionjewelry #3dprintingdesign #3dtutorial #jewelrycollection #jewelrybusiness #caddesign #matrixgold #matrixgoldtutorials #rhinotutorial

Хобби

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@brandonemamalie5922 19 дней назад

Thank you so much. It's crazy how underrated this channel is. Don't get the love you deserve bro keep it up. God bless

@donsjewelrymakingandjapantrave 14 дней назад

I appreciate that! I'll try to keep it up. Getting a little difficult at the moment. Many life issues popping up. lol I really appreciate the comment and your support. Thank you.

@chzaryab488 Год назад

I seriously don’t have enough words to thank you.🙏🙏

@donsjewelrymakingandjapantrave Год назад

You saying that is gratitude enough. Thanks for your support.

@dyamonta Год назад

All expressions of thanks do not give you your right In all honesty, you are a wonderful and kind person ❤❤ May God bless you 🙏🙏

@donsjewelrymakingandjapantrave Год назад

That is very kind of you. I apricate you. Thanks for everything.

@fexterperez3297 Год назад

Thank you very much Don! you are awesome! this is going to help a lot to all of us that are enthusiastic about the program but are taking the first steps for then make the awesome works that make the real professionals like you! 🙏🤓😁

@donsjewelrymakingandjapantrave Год назад

You're very welcome! Thanks for all your support.

@cansahinoglu Год назад

You are a very good teacher.👋👋👋

@donsjewelrymakingandjapantrave Год назад

Wow, thank you!

@TheAcho83 Год назад

Thank you so much, this makes navigating this system much easier. It also answers my questions from the last video, it was the osnaps I wanted! Thanks for your content and answering our questions, we appreciate you.

@donsjewelrymakingandjapantrave Год назад

Glad it helped! Thanks for your support.

@AghaZee-lf2zm Год назад

your a grest teacher !!!!!!!!!!!!! thank you !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@donsjewelrymakingandjapantrave Год назад

I just hope it helps. I know the program is massive and so much in it. It can be challenging to have the design in your head but not be able to get it out. Thanks for the comment and support.

@NoEnd911 3 месяца назад

Big thanks master!

@donsjewelrymakingandjapantrave 2 месяца назад

lol Not sure I am that, but I will try my best. lol thanks for all the support and the comment.

@annamomoh6440 11 месяцев назад

Thanks a ton!

@donsjewelrymakingandjapantrave 10 месяцев назад

You're welcome!

@jewelbug3449 7 месяцев назад

Hi, I've just discovered your excellent channel! So many very useful tutorials I use Matrix 9 and not looking forward to one day having to learn Matrix Gold - especially as they've removed the V-Ray rendering! Do you have a tutorial about how to place the Rhino command bar into the workspace? Thanks so much :)

@donsjewelrymakingandjapantrave 7 месяцев назад

Welcome aboard! I am loading one up now, but I think there are some others. You really shouldn't let the v-Ray thing stop you. Cycles has a little learning curve but after you get the hang of it, I truly believe you will really like it. Thanks so much for the comment and all your support.

@jewelbug3449 7 месяцев назад

@@donsjewelrymakingandjapantrave It's just so weird how they removed it in favour of something inferior, and how do you learn it? I have so many little setting tweaks and preferred angles, lighting etc on Matrix 9. I hope to replicate one of your tutorials in my lunchbreak every day!

@donsjewelrymakingandjapantrave 7 месяцев назад

I feel you! I felt the same way when I first purchased MG and actually for a few months afterwards. lol so frustrated trying to get my renders to look anywhere close to what I was getting in M9. But honestly cycles is a much more powerful program. Have you ever studied Blender? Have you seen what they can do with that? Absolutely amazing stuff. Cycles is the same rendering engine. It is not just a mapping of the image over something. Cycles has more depth and versatility. With more options and more it can do comes a more complicated learning process though of course. There are really good videos on Rhino’s website and Gemvision’s academy have some very good video on rendering in MG. You get a 6 month subscription to the academy when you purchase MG so you can really get up to speed on the new rendering engine with those videos. He also goes into external assets that you can load in. Very helpful. Then like when you first started MatrixGold it’s just grinding it out. I know in the short term it is frustrating but in the long run I believe you will not want to go back. MG does have some V-Ray type things. The lighting isn’t really that different. Good luck to you on which ever way you go. Not trying to sell you MG just really trying to explain my own experiences with the transition. Best wishes!

@jewelbug3449 7 месяцев назад

@@donsjewelrymakingandjapantrave Interesting thanks for that :) I just use it at work ans rely on renders for sales - if anything happens to Matrix 9 and I'm suddenly thrown into the deep end with Matrix Gold, I'll be out of a job! Thanks, I'll have a look at some tutorials......I just don't know why they 'fixed something that wasn't broken!'

@apexvisuals6385 5 дней назад

How do I pave different types of diamonds. Guess there is no options for that. Are there workarounds?

@donsjewelrymakingandjapantrave 4 дня назад

Great video idea. I will try to work on that in the future. But to try to help you out until I can get that up on the channel, after you place the gems using pave gems. Ungroup them. Chick on the gem you want to change. Make sure it is highlighted. Then click on Gem Override in the gem's menu. You will see gem pop up in the dynamic commands area. Chick on shape and you can change to whatever shape you want and even adjust the size of the gem. Hope that helps. If you run into other issues, please let me know. I'll try to help and also, I can add any issue you have to the content when I can post it to help others.

@apexvisuals6385 2 дня назад

@@donsjewelrymakingandjapantrave that helped me allot thank you and a tutorial on this would be great.

@gabrielpasche690 4 дня назад

I am getting black screen every time when using matrixgold in mac os parallels, need help plzz

@donsjewelrymakingandjapantrave 4 дня назад

Humm! Not much of a Mac user myself. The first thing I would probable do is contact Gemvision user support. They will defiantly be able to help for sure. You could always try uninstalling and reinstalling the program as well. But I would first reach out to tech support. They will get on your computer and in a live connect with you to fix it. Probably not really what you wanted to hear but really is the best way to resolve the issue and keep it from happening again in the future.

@Ka32s1125 7 дней назад

How to switch 0.5 to gridsnaps

@donsjewelrymakingandjapantrave 4 дня назад

At the bottom you should see several boxes starting from the left the MatrixGold version you have. Then a few others like maybe Clayoo and Untitled, timer and then Auto hide. Next to Auto Hide at the bottom you should see Grid Snaps. Make sure that box it checked. That will give you options to choose 0.01, 0.25, 0.5 1.0 choose the grid snap you are wanting, and you should be good to go. Remember to turn them off when you no longer need them to get a smooth flow. Let me know if that helps. Good luck.

@Ka32s1125 4 дня назад

@@donsjewelrymakingandjapantrave thank Thanks it work