A most enjoyable video. I really like the down home delivery that you have. It would have been nice to see that last coin cleaned up a tad. At any rate, thank you from a newbie. 😃👍🏻👍🏻
Welcome, just got my first garrett detector, love it! So exciting, havent found anything yet, 3 minutes from the gulf of mexico so going soon to scour the beach! Everglades well ....can find alligators!!!
Good stuff Ben! I agree with everything you mentioned. Tone first. Always. Then factor in the other info given by the detector. Some great tips there for anyone who is new to the hobby. Thanks for the shout too buddy! HH Dewayne
Hi Fellow Treasure hunter... Love you're vlogs. Exstreamely entertaining and educational. Showing my fellow hunters some much deserved love all the way from South Africa 🇿🇦. Keep them comming mate.
You’re right Carl. I kinda focused a bit much on the high tones. I’m digging anything non ferrous that repeats real stable for me. I’ll have to mention that in an upcoming video. Thanks!
those tips seem simple and silly but are the most important for a beginner the o ly one I would have added is not to lift your coil at the end of your swing. I watch many new detectorist swing from the elbow instead of the shoulder. great finds and info Ben! silver quarters are my kryptonite lol. slq is the top on my silver quarter bucket list well a seated quarter as well but being realistic for a west coast boy! best of luck to you and yours cheers Nathan
You’re right Nathan. The lift at the end of the swing is definitely something a lot of beginner do. Hoping you bust a few of those bucket listers in 2018 bud!
Just watched your video on tips for hunting. Wow! Alot of information on starting out detecting. I always thought that it was my detector because it is a" beginner" Ace 250. It might be that but alot might be that I wasn't using it correctly. Thank You for your information. I'm sure I am not the only one who has had those feelings. Someday I can get a better detector , but until then , I am and will have fun.
I started with an ACE 250. It’s not a bad machine. It tends to give more false signals so you dig more trash....but it will definitely let you know when you get over something good. There’s a learning curve with a every machine. The more you use it the better you will understand what the machine is telling you. Good luck!!
That's right! It took me a year before I felt like I really knew what I was doing! The more trash you dig the better detectorist you probably are. Ha ha ha!
I dig the tips. I’m new to this. I’m a coin collector that collects slowly. Mostly coin roll hunt but was looking to start a new low cost hobby for me an my son to get into. I figure after the initial cost of the detector it really shouldn’t cost to much other than is driving around enjoying. Figured during the nice months we can get out and hike and hunt and during the winter months we can coin roll hunt. Any advice on a decent detector that is user friendly and works great with good depth. And advice would be appreciated. I’m located in Missouri.
cody bryan Hey Cody! Since coins seem to be what you are most interested in I wouldn’t worry about getting a high end detector. The Garrett Ace 250 is a good machine for around $200-250. When you get over a coin it will definitely let you know what’s there. If you have it in your budget, the Garrett AT Pro is a great machine ...around $400-450. It has the ability to discriminate out trash that will often sound like coins. Both machines can be purchased used though for much less. My own machine was bought used (AT Pro) four years ago and is running strong still. Good luck to you both!
Just stumbled onto your channel. Great information especially about the aluminum flashing. Started practicing in my back yard and have found 3 pieces of flashing. The hardest thing so far to me is wondering if my settings are right and digging deep and not coming up with anything. I will keep practicing and watching.
I went with the ace 400. True reading the book that came with it and a ton of videos. Went in my back yard to practice. I’ve found a few pieces of trash. I’m not discouraged at all just think I could no have something not set right. Just moved to central Kentucky. Figure there has to be some good stuff. Thanks for responding
The 400 is a solid machine. I started with the 250. Best advice I can give you is to dig every signal that repeats consistently. Ignore the beeps and chirps that are inconsistent and random as you swing back and forth over the target. Also...after you here a good repeatable signal...look at your ID screen. If that ID marker is staying in the same general spot on every swing...dig it! You’ll soon learn that the more that market bounces around...you usually are dealing with trash. This isn’t always true though. Some odd shaped objects with do that as well. The ACE 400 loves round objects....it will give you a nice solid tone and a stable ID marker every time. If you swing over a coin or ring...it’s not going to lie to you. Try detecting the edges of your drive and walkways for a higher chance of finding some coins.
Robyn McDonald That’s a good question. I think that there are allowances for places that are designated swimming or recreational areas. But I don’t think you are allowed to detect in every body of water. You can usually find the National Forest guidelines for metal detecting online though.
I’m actually not a very tech savvy guy, but I have seen a few of my friends put some of those apps to good use. Especially the ones that track your movements and allow you to put markers were you find objects. This is real handy when hunting large acreage like farm fields. It allows you to spot areas that are producing better finds. It can reveal things like old footpaths that are no longer visible. Try them out. You may really benefit.
You are exactly right. Even with cheap detector you learn your detector. They may not go as deep but they work. Thanks . I dig all. I have just started a youtube channel would appreciate a sub and like.
been watching alot of metal detecting on here, and ALL of you find something and immediately start rubbing the dirt and sand and grit into the find with your thumbs! STOP already! get a spray bottle of water and a small brush, dont take the chance of adding scratches...thank you. I just got a Bounty Hunter Gold digger but my yard is frozen and is too hard to dig !
moo moo It’s good advice for sure. I have a hard time thinking in terms of an items monetary value and have never had a problem with the small surface scratches that are on a worn out quarter. Hopefully I’ll avoid doing it to a better coin. Good luck on your hunts!
Every time I dig trash and take it out that is one less I have to listen to or dig next time I come back check out our website at www.etrac-h.com big hunt coming this September 29-30 with the 30th being all gold hunt!!!!
I will check it out! Thanks! There aren’t any clubs close by (with an hr. drive) so it’s just me and a couple local diggers that hunt together occasionally. Always been interested in going to a club meeting to see how things work.
Really enjoy your videos!! I've been detecing for about a year, and have finally got in the habit of listening for the tone more than worrying about the VDI..
I learned that one day when metal detecting in the light rain, I put a plastic bag over my Control Panel and could t see the VDI and ended up with a Silver Washington on my property in a spot where I'm rather picky with the signals
Good tips are always worth paying attention to. I held my detector upside down for the first 2 months and wish someone told me. Never found anything... :)
I guess great-grandma was right way back when - about money that "burns a hole in your pocket"..? I don't think I've ever lost a cent.... maybe I'm just careful?
I got hurt a about 8 years ago and while recovering my wife told me to get a hobby. So there was 1 metal detecting store around and I bought the Ace 250. I went out a few times but didn't find anything so I just put it up in the garage. Well , I tore up my shoulder so before surgery I picked it up and started to metal detect again. After watching alot of videos on beginning metal detecting , I started finding stuff. I found 6 tokens from Tripp S. Dakota. I live in Spokane Washington. No one in S. Dakota can tell me anything about them. I found a standing liberty half dollar ( 1919 S). I'm having a blast. But I have a couple of questions for you. #1 Every once in a while I see you spray your targets to help identify what you found. What is in the bottle? Just water or something else. #2 Did you ever use the Ace 250? If you did , did you have any luck with it? What , in your mind , is the biggest downfall using the Ace 250? I see people with the expensive defectors. Is there really a big difference and how are they different? Thank You for taking the time to read this. Take care and I hope you and your family are doing well God bless you.
Carl Sowell Hey Carl. The only thing in those spray bottles is water. It works well on most things but I wouldn’t recommend spraying old copper coins or buttons. I started with an Ace 250. Good machine. It tends to false more than an AT Pro but it will tell you when you are over a good target. Don’t let it get wet though.it takes time to learn any machine, but keep at it and you’ll start understanding its language soon! God bless and good luck!
gracias por los consejos! soy nuevo en éste hobbie y estoy conociendo mi equipo nuevo, un vanquish 340. Saludos desde Argentina. Thanks for the advices! I'm new in this hobbie and I'm also getting used to my new machine, a Vanquish 340. Greetings from Argentina!
I'm looking for a good metal detector to get started with, under $150. Every video and forum on this just confuses me, as cheaper ones seem to be older models or toys. I want something that will work and I won't grow out of fast. Can I please get a suggestion?
Very good advice Ben. My F75 is a audible machine. It's so sensitive that the VDI tends to jump around because of other stuff around the target. Better to pay closer attention to the sound. If the target is round, the tone will sort of sound round too. Very rounded tone.
Good evening. I've been watching your videos for awhile now and didn't realize until tonight that you were close until I saw your video of the moose in Maggie Valley. I got really serious about a year ago when I bought a Minelab Explorer XS used. I know it's old and damn heavy but it really got me going. I'd love to get in touch with you. Right now I am a sponge wanting to learn everything I can about the hobby. I live in Waynesville and hope to hear from you.
Hey Chris! Thanks for watching. I’d love to get together for a hunt, but I’m getting asked to take people out more and more these days. I don’t really have enough permissions to keep up with the demand. So here’s the deal. I need footage for my videos. If you will get a place to hunt, I’ll come out and hunt with you, film the hunt, and you’ll keep everything we find. I seriously don’t want a single item....just the experience and the footage! Will that work for you?
@@HistoryHoundDetecting I appreciate your response and I completely understand. I keep searching for areas to hunt. It can be a bit slow since I've only lived here a little bit. When I find somewhere decent I'll be sure to reach out.
Really enjoyed this. You do a great job. I'm in Sc on a real plantation house community. There has to be stuff here. Problem is developed land for the homes, but I'm gonna try.
Excellent advice at the beginning of the video. Dig a lot of holes and learn your machine. Very wise advice my friend. Thank you for this video. Just subbed 😊
Great Video Ben .. Great tip about beginners seems to stop the detector instead of keep swinging it over the target . noice finds also ... take care Ben
Yep. About the time you think you’ve kicked your bad habits, you’ll find yourself doing one of them again...especially when you get tired at the end of a hunt
The Metal Detecting Channel Thanks so much for subbing. The virus has got the hunting and filming slowed down for right now but hoping to get out this week!
Just a toothpick after it dries. The only exception is for Indian Head pennies. A brass bristled brass usually cleans them up real nice....but use a light touch when brushing. If it’s a really crusty coin those brass Bristol might just pull a date out for you. Never use water on anything other than silver.
Great stuff! Ur the kind guy I'd love to hunt with. (Gwinnett Co. Ga.) & a newbie with a ctx?? Wow! I've been swingin since the 70's & even I think that's too complicated for me! Great vid!
That’s awesome that you take time to share the hobby with them. Digging with kids can be a bit tedious, but it has great rewards in time spent together!
Ricky Bryan awesome! Good luck out there! There are some real good metal detecting groups on Facebook that will really help you out with tips and ID’ing odd finds. Check out “NC Dirt Detectives” ....or another good one is “R.R.M.D.” Great places to show off what you’ve found too. If you join be sure to look for me on there.
The biggest problem I have is digging the hole in the right spot. I’ll hear a great signal and then either lose the target completely or find it several inches outside my original hole.
We all miss em. When I have a target disappear I usually find it in one of three places. 1. In the hole- sometimes an open hole causes a detector problems hearing a target on the bottom of the hole 2. It’s actually right under the grass on top of your plug. 3. It’s stuck to the shovel
I don’t know about a key date, but there is a double die variation on the 42. Wish I would have checked it a little closer before leaving it with my friend. Thanks for the info!
I would like to add that the big hairy thing on the side of the road will give off a JUMPIE target.! Was that a transplant from Kentucky? Fun video, thanks for sharing...
Haha! Those elk were released in the Smoky Mountains a few years back. Starting to spread out to the surrounding areas though. They are intimidatingly big!
Great tips for anyone. I've dug good signals that were trash and not so good signals that were good targets. Was tired of digging zinc pennies and decided to passed a zinc penny signal. Couldn't stand it and went back and dug the signal. Was a gold and platinum wedding ring. You've got to dig it all.
You are absolutely right. I think I talked a bit too much about “high tones”. If it repeats nice and solid, I’m digging that sucker. I’m usually digging the choppy targets too. Made several nice finds on those in the last couple years.
Learn your tone difference between targets,and keep on digging my fellow recoverist.hightones are just as sweet as the grunting sounds.its dumbluck digging,I love it.
If you don’t mind me asking where abouts are you detecting? My daughter and I are just learning, she’s 7, and we’re southeast Ky. Like... as far south and east as you can go and still be in Ky... lol. We have a lot of history here, but a lot of parks. That makes it tough to detect when you can’t take a metal detector into a state owned property.
Jonathan Sizemore I’m in extreme western NC. Spit and you can hit GA and TN. I feel your pain about the parks. Your daughter should be able to help you get permissions though. I’m not above using my kids to help me get a yes! Good luck!
Same here in Texas, they frown on us diggers, no State or NAT'L park ,not allowed.but if you run across some park manager from the City and explain yourself to him he may have permission,it's happened to me.i suggest using a good knife with a serrated edge and around 8-10" long.not as cumbersome carrying a blade than shovel.if you have to have a shovel,get a folding type like at the army/ navy store.