Beginners woodturning birds mouth bowls in 5 easy steps

Подписаться 5 тыс.

Просмотров 12 тыс.

50% 1

With these easy steps anyone can turn a birds mouth bowl. These bowls are a great way to use those small logs and branches. I am using a 6 inch diameter piece of spalted maple to make this bowl.
The foredom rotary tool i used amzn.to/46VWGft
The kutzall burr i used amzn.to/3MvonUj
Visit blacklabelwoodworks.com to see more of what I make.
I do interactive remote demos through Zoom for clubs and to the public. Visit my website to for more details and a schedule of upcoming pay per seat public demos.
www.blacklabelwoodworks.com/i...
There are risks involved with woodturning. My videos are only for entertainment purposes. If your not familiar with the turning techniques I use consult with an experienced instructor or mentor. Always use appropriate eye, face, and lung protection while woodturning.
As an Amazon Associate I earn from qualifying purchases.
Some of the tools I use in my shop.
Grizzly G0766 lathe amzn.to/3kiHBhX
Hurricane turning tools bowl gouges amzn.to/3CY32Mp
Hurricane turning tools skews amzn.to/2YrfkxQ
Nova Supernova 2 chuck amzn.to/3kmeoT8
Grizzly 17” bandsaw amzn.to/3qh1ee4
Wen slow speed grinder 8” amzn.to/3D0YfK6Turning birds mouth bowls is a great way to use all those small pieces of logs and branches. They are great practice without using expensive pieces of wood. You can literally go into your backyard and grab any decent size branch to use.

Опубликовано:

2 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 10

@steveauer413 6 месяцев назад

Great thinking out of the box and with materials we generally already have. I had no Idea about the the paper bag trick!,

@BlackLabelwoodworks 6 месяцев назад

Glad it was helpful!

@DavidBird-uu8km 6 месяцев назад

Very nice Great design.

@BlackLabelwoodworks 6 месяцев назад

Thank you! Cheers!

@user-ij1iq4yc8d 5 месяцев назад

Adding the epoxy and sanding it out would be easier if you don't remove the tenon, then after adding the epoxy you can put it back on the lathe for quicker and more accurate sanding. I realize, however, that he did it this for way for drying purposes. But if you start with dried wood then you could leave on the tenon for the last step with the epoxy.

@paulplager9498 6 месяцев назад

What type of DRill bit was that. I know them as forever bits

@BlackLabelwoodworks 6 месяцев назад

Its a carbide tipped forstner bit and it has lasted a long time. amzn.to/47KlveV

@brianhenry5834 6 месяцев назад

I warched how smoothly you carved the inside. Even when your bowl gouge was 3-4" extended from the rest. I find it hard to not get chips or chunks dug out. Very hard to make the inside smooth, the outside is easy. What am i doing wrong?

@BlackLabelwoodworks 6 месяцев назад

There are a couple factors that affect how bowl gouges preform on the inside of the bowl. The grind determines the approach angle. The gouge i was using was 5/8 with a swept back or Irish grind. The rotation of the flute is another factor. The more the flute aims up the more aggressive the cut will be. If your gouge is getting grabby try rotating the flute in the same direction your making the cut. The more you rotate the flute the less would you will remove but you will get better control. Last you want the back of your handle of a bowl gouge to be slightly lower then the tip. Hope that helps.

@brianhenry5834 6 месяцев назад

@@BlackLabelwoodworks thx very much