Behringer Europower PMP3000 dyno, real life audio output power test 

It's a really nice mixer, easy to install and carry around.

Never. like stereo

Thank you too

Hey! I can't have a power test based on Kick short impulses with or without compression , this test needs a sustained sound.

I only have PMH3000, but you can download here clubdediagramas.com/archivo/audio-equipos-de-musica-amplificadores-reproductores-etc-a7/behringer-m1214/behringer-pmp3000rar-f121396.html

Yep, a single frequency per test

@@viocaia There are two outputs for speakers. That means 100% 2 x 446 watts or ?

@@TRILERish right, there are two power amplifiers, separate outputs. Also, it can tied in bridge for a mono double power output.

@@viocaia tanks for info :)

As you can see from testing results, the power is around 450W in 4 ohms..so you'll need at least a 500W loudspeaker with 4 ohms or 300W in 8 ohms. Like a rule, higher speaker power never hurts! You can use 2000W boxes...as long as you are in the impedance limits , min4 ohms everything will be ok! But if you intent to use smaller...well, that's depending of your common sense, use the volume carefully, you can feel when a loudspeaker is overdrived. Finally: min 500W for 4 ohms, at least 300W for 8 ohms and 1000W min at 8 ohms in bridge mode.

Please see the video at 11:15 , you got all the resuslts.

Go for it! It's amazing good sound..for the money if course!

If you sell it let me know! :-)