Berrys new offset blower kit 

Thank you. That was the look I was going for. We now have more carburator intake options

@@berrysblowers6411 I’m curious how it would run with a appropriate CFM four barrel Or even a Holley sniper kit.

I think for a 1835 the sniper would be to much but a 500 holley would most likely do good cause I have dome that with turbos

@@berrysblowers6411500 Holley would make it scoot! But holley does make an Autolite 1100 style one barrel sniper unit along with a unit similar to a Carter BBD Two Barrel. I also think a great carb to use on this would be a Weber 32/36 Progressive Two Barrel

It's possible you could use your dual carburator as a blow threw system but it would require more parts than just a blower. Thank you for your interest

Please email or Facebook messages me please

Thank you!!

The ignition is a 009 size with a 90 degree cap and yes smaller the pulley more the boost but I highly suggest a stock blower pulley on a 1600. And yes ratio rockers help

Thank you!

I have not had no issues at all so far. We do have a steel intake now for the stock carburator and im Working on others at this time

I slightly ream the main jet and I opened up the pump jet all the way. Thank you for your interest

Berrysblowersllc.com

You can drill them or you can weld tabs on the front or rear and bolts to the case halves

@@berrysblowers6411 Ahh, I see! Thank you!

Might not be to hard at all. Just would depend on the style of FI you have

The older busses don't have room above the alternator for the carburator to clear the upper tray, so we flipped it. It was not my idea. A gentleman asked me to finish what he started and he now has the full kit and if he is happy and all workes well I will offer them. Thank you for your interest

Is yours a paper filter or the older oil bath system

@@leeberry584 paper

@@gregoryschwarz2730 I'm not sure i have one to try but ill look in my storage building

I posted a photo of your air cleaner would fit. Its on berrys blowers Facebook page. It does not fit. Thank you for your time

I use a little paper filter

? How did you try to contact berrysblowers? And I am sorry I have no email or Facebook message?

Ushly around 40% increase but depends on how the stock engine is built like mechanical compression and any head work. Thank you for your interest

No. ?

Actually, I have used v belts for a year and half one this car, and this month, we actually just pulled the engine to put a larger engine in

Looks like it rides on the backside only on the tensioner.