BEST 3D Warbird | E-Flite Carbon Z T-28 

Want your own T-28? Right now they're $70 off! Use our affiliate link if you'd like to support us at no extra cost to you: alnk.to/1XWdWiF

Thank you John for your donation of this T-28. People like you are what makes this hobby so great.

Thank you John for the donation toward making such great content. Another must mod besides the multi connector and improved linkage/control horn that HH should have done is separating the nose wheel steering from rudder channel so steering can stop when gear is retracted. In stock form it leads to premature death of the steering servo.

1:48 beautiful save! Holy hell!

There could actually be a grain of truth to the claim that yellow ones always fly better. At least we tend to fly them more precisely because they are easier to see. Thanks for the demo.

Thank you john for providing material to this awesome channel.

THANK YOU JOHN 🎉🎉🙏🙏!! also, it might be nice to see some more float content (aka turn T-28 into floatplane 😆😆)

My vote still has to go to a t-28 biplane. Also, that was by far the best save I've ever seen in RC

Awesome of John to donate this awesome T28....

A bush conversion would be exciting. Btw., this review is an absolute masterpiece guys!

I love the honesty of your channel. A lot of these companies sell a lot of fluff and biased opinions as fact when there not. Your channel says what the majority of people are thinking but afraid to say. If companies knew what is good for them, they would take your content seriously.

Thanks John!

Flying out of the uhaul was epic. Love the way you wring out all the good and bad with this aircraft. Bounce one off for me.

That intro is hard asf

The Man, The Myth, The Legend. Lord John

Thanks John!!

Legend John! Great video!

Definitely enjoyed this one! keep it going brother!

Tailheavy uploaded, it's a good day.

You should totally enable reverse thrust and do a backyard landing...

I've had this same Trojan since 2020 but in the OG red and white navy skin, but I also went even a step further... I not only did away with the two bladed stock prop... I bought a Biela (only sold in germany afaik) semi scale composite reinforced wood core prop with custrom paintjob to look like a hamilton standard triblade you find on most US radial engine warbirds. that also combined with a Robbe 130A opto-esc to have plent of redundancy when spinning such a prop and opto making the ESC run of a sepparate battery circuit to prevent the servos from getting signal interference. never had thermal throttling or servo flutter issues that way. that being said, I haven't done serious Aerobatics with it because I don't trust myself enough to do it and not total it in a crash. I once attempted to go inverted at high altitude but cucked out half way going inverted. A magnificent RC bird either way, and a great entry model if you are looking into flying semi-scale models

Thanks John. Great video fellas!

Your best review yet good work👍

Love the T-28, have the original parkzone, and the erm bigger HH one but not the biggest HH one, love em, great flying, had an FMS one and sold it as I needed the space. Yellow planes I've found don't fly better, but are easier to say and repair just the same! I'd love the Carbon Z

Fun fact if post in 7 days you will post directly on my birthday just got a gas OV-10 and ultra stick but yeah great videos -MrPoland RC

Thx John!

This is a great ad. I love mine, thankfully in the red and white.

Your videos are always good. This one you smashed out of the park. I will bounce one on for you. Cheers

Dude amazing ❤ keep it up like this 💯

I'm so glad to see the capital from all of those TShirt sales is going directly to awesome production big budget items. Like U-Hauls 😂 Its also refreshing to see the landing gear on HHs $600+ T28 models jiggle around like the 1.2m BNF T28- the model i can afford after stocking up on THp TShirts and decals (Which are Awesome!!!) Love your videos- SICK save over the pickle ball courts, man!! Really love your merch! Thanks for brightening a very windy/gusty/crappy Saturday, for below average rc pilots like me 👍

thanks jon

Great video, like always! 😀 Please convert it to a tail dragger! 😎

Another great vid guys! Hey what beach is this?

John’s a real one this

haha i love this channel great work

Thanks, John! Love hearing the THP snarky review 😂

Haha cool, love ur content

Could you make another video about the FM's pa-18 1300mm please ❤❤❤❤

suPER Super stol conversion. Like wing cube loading under 4 please :D

You should put and edf on the other one

My grandpa used to wear his beats by dre solos while flying in ww2

Love the video, can I please get a link to where you got your prop?

Bush conversion please 😊!!

Taildragger T-28

How do you know which prop to use for better performance or efficiency?

John is the boss!

Try a carrier landing with it. Figure it out

I was entertained

Send me one as well John , Thank u so much !!

How did you turn off the AS3X?

Let’s gooo

It has a very clear canopy that just is begging for an FPV review

Can you please review the super ez 1200mm

Bush conversion! Or fpv

Twin edf T-28! Make it look like an airliner 😂

I'd like to see you re-paint it, with paintballs, spray paint, and pneumatic sprayers in flight

Sick! 😎 Although on the ground, it reminds me of a newborn baby deer on it's little stick legs for the first time😆

Forced slip approach is stabilized, just sideways 😂

Guys you HAVE to try the umx ultrix. For me its one of the best planes ever

First like and comment wooooooo🎉

i fly fms bush pa 18 super cub, do you think i can fly this?

You guys are freaking awesome. Peak of the peak of good.

OH MY GAWD!!! This must be one of your most greatest videos to date! I completely enjoyed this one, from start to finish. And OH, BTW, what exactly was Bayley doing at about 05:32 in the video? It appears as though he was trying to get a bit LESS Tail Heavy 🤣😂! All the best to my lunatic friends in the Granite State, I hope you all are surviving the early Spring snow!! (OH...and THANKS JOHN in TEXAS!!!) 😎👍

Put it on floats!

Mid range FPV craft. Can you get it a couple miles away and back

Can we see a turbo raven 69 review?

That was a sick save guys! And a true blue pucker-up-the-b-hind moment. Keep these awesome reviews/videos coming. Never a boring minute.

John you Rock!

Make it a Double EDF conversion a la me262

Rockets. Add lots of rockets!

Thanks, John!! 🎉🎉

How tf did y'all save that from crashing on the "bull in a china shop" situation?? I was making the same noises y'all made 🤣🤣🤣

Flying out the back of a truck? Creative lmao! Also that save at the beginning was incredible😅

If the ad says it's capable of 3d, why not? 😂 And thanks John!

maybe a ....EDF T28 TROJOAN?

Brings you back to the 1960, where T28 pilots flew on questionable drugs and blasting freebird thru there airpods. Truly, theres nothing like it". 😂 laughing for 15 min, what a qoute ! 😂😂 You got yourself a free out of hell card, just remind me off it if you ever find yourself needing it.

second

The full-scale T-28 is rather awful (ugly, slow, has a flatulent-misfire engine note) but the Carbon Z T-28 is a scream. I need to look around for a used one - $600 is a boatload of dinero for a flying beer cooler, no matter how cool. One question - were the beach shots taken in or around Rye, NH? I lived up there while I was counsel for PlaneSense, a Part 91K fractional program that operates a fleet of PC-12's and 24's out of Pease. Great videos.

Me still waiting to get my first plane with actual controle surfaces.......

I always felt the T28 was meant to be a twin engine plane

Amphibious T-28?

T-28 Biplane? T-28 Floatplane? T-28 EDF??? All of them??!

Good onya John.

bush conversion

Thanks, John.

The intro is epic ,now thats how good pilots take off😎😎

yes my 3d war bird go fast but want plane go faster 👍

First like and comment wooooooo 🎉

you should let jay crash it

I always look forward to Saturday because I can watch the new THP while working on planes

Hi there my name is Alex Martinez and I have a Z T28 with a Custom paint job. I would like to send you some pictures of it.

3.50 go and get some spectacles or contact lenses bro

It will flat spin inverted. But the gear has to be out. Gear in it won’t do it

honestly, tail heavy RC usually does a two part review: In part one, they review the stock aircraft, And in part two, they go absolutely crazy. Great content

Great video! I spy our local flying club, The 495th RC Squadron. Come and fly with us any time!

Dogfight with paintball guns strapped to a T- 28 and a German warbird🛩

Fantastic job on the review Zach I would love to see you add full span aileron mix(aileron+flap mix) to see you do full blown rolling harriers with it or at least a rolling circle with it??

BTW Thanks again to John for being so very kind for giving your giant warbird to these guy's once again my mind is BLOWN to see what Zach could do with this plane 3d wise I truely love ''3D Sleeper'' planes!

I have a question. I've recently built the Phoenix waco. I've mounted a saito fg90r3 with a 24x12 prop, that saito recommended. But it leaves only 2 inches ground clearance . I'm on my 3rd prop now. My question is what size 3 blade can i run? If I run a 3 blade do I stick to the fuel of down one and up 3???? So do I need a 23 x14 if I use a 3 blade HELP..........

Best recovery I've seen since my mom told me I wasn't adopted