Best 48v Battery Gold Edition Installation!!! Turn your Ninebot Max into a rocket!!!

Подписаться 1,3 тыс.

Просмотров 31 тыс.

50% 1

Thanks for watching and consider subscribing to my channel if you like the content of this video!!!
Gold Edition battery from Mymaxmods Best Installation procedure.
Before touching scooter for battery upgrade - install to scooter firmware for this battery.
For unlocked controllers simply download firmware from: mymaxmods.com/...
choose: Gold Edition
If you are using a New Scooter with black case controller, you will need a New controller as well to do this upgrade!!! Choose the German Version Ninebot Max D Controller. This controller will support up to 60V. Make sure kers are disable on set ups.
Connectors between controller and motor upgrade are require on this installation.( MR60. 3 pin 60A)
For full aspects of this battery Contact or visit MyMaxMods.com
If you have questions about this installation feel free contact me at Esnkaz Ninebot Bot Max Evolution USA Will be happy to assist you!!!
/ esnkaz
I bought this battery in January 2021 and used 14 month worked great!!!
Max speed reached loaded on G2 Motor, 25mph and downhill 28mph.
Max speed reached loaded with single Fatmax motor, 30mph and 34 downhill. This is accurate data using Mymaxmods firmwares.

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@GCasey 2 года назад

Great video. I just ordered one from mymaxmods. This video will make my install project easier. Isn’t RU-vid wonderful? I remember back in my younger years when I’d buy a kit or something needing assembling/fixing and all I’d get would be a poorly written instruction manual. Those days sucked!

@RideWithAnthony 2 года назад

How did the procedure go?

@MrDefiance000 2 года назад

I used Wago connectors instead of the MR60. Works nicely! Wago is rated at 32 amps and the connection is rock solid with them. No soldering needed that way. Just a simple crimp of the 6 wires and put into the Wago and close the clamps.

@HopeForTheBrokenBand 2 года назад

Which wago did you use?

@MotoMario1 Год назад

@@HopeForTheBrokenBand it's 221-412

@badlands5527 Год назад

Do not use wego connectors on your scooter bad idea.

@ardesheerford1741 2 года назад

Thank you!

@milothess Год назад

Thank you for the great video. i believe you covered everything that was required to be explained. I only have one question - can you install the controller facing the other way so the connections are not facing the baterry? it seems a reasonable solution that will ensure no cable is ever going to be squeezed from any potential battery move to the back. I am sure ppl thought about it as well but since you are not doing it i assume its not possible?

@esnkaz Год назад

Thank you so much for your comment! Yes you can install it facing back, which is best for wiring and components as the recharger its removed… take a look of video of how to make the scooter dual motors. Battery in that scooter is bigger than one on this video as well 2 controllers just at the very end of the video you will see how are installed. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qFelQDGsx5k.html

@mykwilwin 2 года назад

What was that module thing close to the rear wheel just behind the speed controller? it didn't go back in after your 48v battery upgrade

@esnkaz 2 года назад

Thats the original recharger that comes with scooter. When you install the 48v internal that part comes out as choice as is not needed we remove it. 48V internal comes with its own recharger and no need that. :)

@whoanelly- 3 года назад

does the battery gauge still work wihtout that white plug? Be good to know what kinda of range we can expect with this mod.

@esnkaz 3 года назад

Hey Nelson thank you for watching my video. The battery has it own BMS and dont need additional wires. As per the white connector that is for the recharger port. Battery comes with it own recharger so that part is removed when installing the battery. Ninebot stock battery 18ml on sport mode from full battery to 0. Gold Edition 36-40Ml Sport mode. however this could varied depending on how heavy the person is or what extra weight person is actually putting on. MyMaxMods Has this batteries. Make as well for other scooter models.

@whoanelly- 3 года назад

@@esnkaz sorry still confused. The battery indicator on the screen where there speed is, does this no longer work after swapping out the battery?

@esnkaz 3 года назад

@@whoanelly- MyMaxMods thought about all those little details. :) so for voltage readings, temperature they have the meter for it. Please follow us on FB ESnKaz be part of our community for farther I formation about accessories we make as well we try!

@fleebleflam 2 года назад

Other than styrofoam to secure that big ass battery! What else is there to secure it? Does it not come with any brackets & screws?

@karabela3224 3 года назад

hi how is it when you have the gen 2 motor and you have to do that with the conectors mymaxmods recommended the other battery to me what is your opinion

@esnkaz 3 года назад

Connectors are optional. Regardless if you are using your regular scooter or upgraded.

@karabela3224 3 года назад

Which cable connections are you using? I can't find any violins

@esnkaz 3 года назад

Connectors are MR60

@RideWithAnthony 2 года назад

Great video the only problem is that battery sitting on the lid it’s not good when bumps and vibration

@esnkaz 2 года назад

I install all the time this batteries and mostly extended which are bigger than the one on video. They dont move at all neither vibration move them. If you cant get the sponge heat resistant for it simply use the packaging that comes with Sharkset and pressure it from the sides making sure all wires are off the way. My installations batteries dont fall even when putting scooter on stand possition without the battery cover. I posted a video on FB groups when I did this videos. If you dont secure the battery you are putting in risk of damage as well damage controller or wiring.

@RideWithAnthony 2 года назад

@@esnkaz is it possible to get some sort of hardware to screw like the original battery

@esnkaz 2 года назад

@@RideWithAnthony nop

@breahnreyes8251 2 года назад

@@esnkaz what’s the difference between a standard 48v and the gold 48v

@esnkaz 2 года назад

@@breahnreyes8251 you would need to tell what standard you are referring to.

@SteamrollerSteve 2 года назад

Is there a flash that needs to be done after instal? If so how is it done?

@esnkaz 2 года назад

before installing battery/batteries need to install FW according to new voltage you are adding.

@cristosimao4929 2 года назад

@@esnkaz what do u mean? u didnt mention this in the video

@esnkaz 2 года назад

@@cristosimao4929 Video is for the battery installation in the scooter. Firmwares for each battery are to be download from Mymaxmods website. Then follow instructions for software installation then once that is done then you will need to install the battery. Please follow EsnKaz group if you have questions feel free to post there.

@chuyramirez3731 2 года назад

So, why did you had to remove the charger from the scooter

@verus2k6 2 года назад

Just curious if you can use any after market voltage dashboard for the gold battery. My max mods currently only has the battery itself for sale. The option with the voltage dash isn't available. I'd like to purchase the battery but also have the dashboard.

@esnkaz 2 года назад

You can get a multimeter to read voltage.

@Johnny2Feathers 3 года назад

Is it necessary to do connectors upgrade with the 48v power pack (21700 cells) 20ah ? Thanks for the install vid as well!!

@esnkaz 3 года назад

Just a prevention as we know those connectors get damage with scooter stock battery...

@reelzkevin 2 года назад

Do the connector upgrade please if you are going to install the 48v battery cuz if you don’t those wires are going to burn and cause a fire

@fiixed75 3 года назад

Great video thankyou. Can I ask why you are doing the connectors upgrade and where do you get them from?

@esnkaz 3 года назад

Thank you. The connectors upgrade is necessary for those who ride in places where is many hills or simply because there is tall people and weight a little more than for what the scooter is designed for and of course is best to upgrade connectors during battery installation! :) You can get them from Amazon or AliExpress. ESnKaz FB for more info.

@Baris777. 3 года назад

Can you charge it with segway 5A charger?

@esnkaz 3 года назад

@Baris777. 3 года назад

How long does it take to charge then with the 48v charger

@alexyu111 3 года назад

The aftermarket battery do not have the data cable , is it ok to leave the plug unconnected from controller board ?

@esnkaz 3 года назад

Hi Yu, If you are just doing installation for the battery and not updating wires, you should not be unplugging anything else more than the battery connectors and plugging new battery. Just make sure to discharge controller fully after you disconnect controller by pressing the dashboard button a couple of times.

@alexyu111 3 года назад

@@esnkaz Sorry I am not confused ,the stock battery has three connector but the gold edition battery in your video only has two. I believe the difference is the data cable

@esnkaz 3 года назад

@@alexyu111 Correct. Gold edition doesn't need to connect to controller. and if you see the video fully you will see what else to remove from scooter so you dont have the extra weight on it for no reason. :)

@ChiggenWingz 3 года назад

@@alexyu111 I strongly suspect they are the balance connectors I believe which help charge the lithium battery evenly. Kind of concerning this replacement battery does not have this as it will lead to problems down the line which could cause inflation and damage

@KvarkLt 3 года назад

@@ChiggenWingz no they are data (power +, - and signal) technicaly for battery life they are not required however its also interesting for me how he bypass controller check of original battery?

@singlespeedsoulja8415 Год назад

What would you say is the estinated max range of the 48v gold edition on a Segway max? Thanks

@esnkaz Год назад

We just tested last week the Actual Gold edition battery rider is 2010 lbs and only got out of it 17miles when scooter shot off with fatmax motor installed on speeds between 10-25mph which was disappointing as back in the days when this video was loaded battery was bigger and range was 20miles range leaving a 15% and with the big one that used the entire space of scooter battery compartment to a max. range of 32miles. As you can compare in this and the new battery is about 2.5 inches shorter and about 5 inches shorter than big battery.

@singlespeedsoulja8415 Год назад

@@esnkaz so the new ones they sell only get you about 17 miles? Yeah, not a lot.

@Menalix Год назад

Is it 13 or 14s? and will regen still work?

@shantanusharma4513 3 года назад

great video, My ninebot max recently got damaged by water as it was stolen and thrown into a lake and was found but not working can it be fixedddd .

@esnkaz 3 года назад

Yes. Rebuilt completely :( all electronics would need to be replace. You could actually turn it into a stronger machine! Mymaxmods has the most wanted parts. Start with a 48v battery. Add the Fatmax then the rest of parts would be controller, dash, lights throttle and brake sensor… DIY follow us on ESnKaz FB! I have done rebuilds from scratch and scooters turn to be great!

@shantanusharma4513 3 года назад

@@esnkaz thanx man I’ll look that up

@seb4301 2 года назад

What will happen if i connect mymaxmods external kit with this battery? Will it become even more powerful?

@esnkaz 2 года назад

Power doesn’t depend only on voltage and amps. If you to add another battery then you need a motor for it such as FatMax. 48v is more than enough for the G1/G2 motors. Going above will burn those motors fast.

@sonidoa.c.g3884 3 года назад

I’m concerned about the electronics, this motor controller and everything else it was built for 36v, and now you introducing 48v, I believe this will cause the electronics getting burn down the line. Please explain.!.!.!

@esnkaz 3 года назад

Hi Gio thank you for your note :) first of all I didn’t introduce this item! Its being use by thousands of people around the world so I decided to help many users in how to install. Upgrades for vehicles had happened since the first vehicle was invented therefore now we have such a fast vehicles. Because there has been people working doing research to make that happen. The ninebot max is one of the best scooters in the world and people loves because is a machine designed to hold up and work under stress under muddy and rainy days! Don’t underestimate this machine! And again due to this amazing innovation and great work from Segway and giving us such a great machine! We sometimes come up with ideas to help people achieve what they need. If your are concern about it simply do not use upgrades on your scooter, believe me there is a lot of people who use their scooters without upgrades But! they look very unhappy when we overpass them :)

@ThePavelbychik 2 года назад

It won't go 32mph. It's not correct speed

@jasspertv8868 Год назад

I can't lay flat the battery on the bottom

@esnkaz Год назад

Did you made it or bought it?

@blakeforrest9600 3 года назад

What’s your charger set up?

@esnkaz 3 года назад

Battery comes with it own recharger. Plug on the small connection on the side of the scooter.

@user-kh5cm7hu8d Год назад

I have the Problem error 21 with the New battery

@esnkaz Год назад

You need to install the firmware for your battery. Battery makers are supposed to give you a firmware according to your new battery power. Unless you made it then you will need to make a firmware for 48v.

@sheikhmeraj6503 3 года назад

hello, can i install a 48v internal and also install a 48v external. Will the range increase double? and is it safe?

@esnkaz 3 года назад

I believe you can. You can consult with MyMaxMods I helped someone install the range extender for 36 which works great as well. I thing they already have the 48V external.

@xavierterrell2457 3 года назад

Hey after I installed the battery I started getting error 24 on my dash and have checked the control board to make sure everything was installed properly what do you think could be the issue

@esnkazesnkaz1478 3 года назад

That happened because you didn’t install the firmware for 48v. You need to install the firmware before installing the upgraded battery.

@DL101ca 3 года назад

Oooops...someone didn't read the instructions.

@DiDeST Год назад

will a 50v capacitor handle this 48v battery? whats the max charge 51v?

@esnkaz Год назад

48v Battery fully charge its 54.4v however you can only charge battery to 95% 53.9v otherwise controller get melted. Upgrading a controller it could work but you will never get the torque and speed another system would give. Visit my group on FB if you are interesting in learning more: Esnkaz Ninebot Max Evolution USA

@DiDeST Год назад

@@esnkaz i got a urbanglide ride 100sx, my capacitor of controller is 50v , i need to upgrade the controller

@DiDeST Год назад

@@esnkaz how much volts is your capacitor? I will join your group

@BurningDrake39 3 года назад

Is the range of the e-scooter different now?

@esnkazesnkaz1478 3 года назад

I’m sure it is. This was not my scooter. As well this is a regular. The one I use an extended one bigger than this one. In my double the range. Tested on sport mode only.

@jonoliravioli1787 Год назад

Does this battery work with g30LP ninebot?

@esnkaz Год назад

I know they sell smaller once for LP. That’s because you don’t like to carry an external? Cause in the nowadays combining the internal with a 12v or 24v is the deal.

@ivanbilandzic6571 6 месяцев назад

Works on g2 max?An whats with softwer?

@esnkaz 6 месяцев назад

You can simply replace the internal battery with a 48v or 52v and replace the stock controller with a D controller and add a custom firmware and you have a 28-35mph nice scooter. Above that front suspensions need replacement. You could also simply add a 24v external and convert to 60v and add d controller.

@ivanbilandzic6571 6 месяцев назад

@@esnkaz good man. I greet you from Croatia from the city of Split! these days a new controller is coming to me from aliex because my speed is limited to 25 kmh and when I hack it with xiaodash and change the region, 35 should be able to go, now if only after that I install that big 48 V battery, is it ready for driving or do I need to install something again, or are there enough custom regions on xiaodash?

@esnkaz 6 месяцев назад

@@ivanbilandzic6571 using that app you can customize the firmware.

@poppinpita6413 Год назад

Any power problems with this mod upgrade??

@esnkaz Год назад

Great product. You will love it. If you would like to know more in how to get the best of it. Visit my group Esnkaz Ninebot max evolution USA and learn about new products we are trying.

@A3T 3 года назад

Will the battery fit in the newer model Max G30LE ?

@esnkaz 3 года назад

Yes. When you contact mymaxmods specify what scooter you own. Chris will send you the right battery for it.

@michaelosullivan4112 Год назад

What is the top speed tested with gold battery

@esnkaz Год назад

With stock motor 25mph and 1000w motor 28-30mph

@rowan1261 2 года назад

What is the type of connector on the cable?

@esnkaz 2 года назад

MR60

@eurotrash2000 2 года назад

Don't understand the weight thing? You add the controller on the scale to even out the weight difference, and then you reinstall it!

@esnkaz 2 года назад

What is added to stock battery on the scale is the recharger. Stock recharger is not needed on scooter when gold edition its installed. battery plus recharger equals extended gold edition weight.

@rahi7339 3 года назад

can i knw the dimensions of the battery?

@esnkaz 3 года назад

As per you can see in video battery fit perfectly :) Once you get the battery simply remove original and install new one. This apply to batteries that replace the stock. MyMaxMods.

@rahi7339 3 года назад

@@esnkaz I was asking it for my bike actually, maxmod is making me customized 25ah battery with tesla cells for my ebike 😊

@danilmaximov287 Год назад

Can you please tell what type of mount do you use for the voltmeter?

@marlonalvarez8290 Год назад

Custom made. 22gauge flat stainless still with a phone bracket. Easy to make. Paint and fold to size. Screw it. There won’t be a perfect meter holder than that. All those glued ones and bulky sold around are bad.

@breahnreyes8251 2 года назад

How long did shipping take

@breahnreyes8251 2 года назад

Also do you need an android to operate it

@esnkaz 2 года назад

@@breahnreyes8251 Please contact Mymaxmods for more info on shipping! You need to load a firmware using an iPhone or android before battery installation. :) Be well.

@_nom_ 2 года назад

Another product you can only get within the US.

@esnkaz 2 года назад

Not really. As far as I know, Mymaxmods ship around the glove

@mantasj1371 3 года назад

max km driving?

@esnkaz 3 года назад

Free wheel 34MPH and riding 30 MPH Range of 40 ML.

@karloerese7586 3 года назад

Can you please send me the firmware? Is itnpossible? I already have a 48V rebuild battery, i just want to try the firmware that max mods gave you. Thanks

@freebird1721 3 года назад

Hi rider, You can found it on the mymaxmods website in the « firmware section ». Have a good day.

@salehdinkhah6854 Год назад

does it fit 30 Max LP ?

@esnkaz Год назад

Nop

@salehdinkhah6854 Год назад

@@esnkaz can you double check? the original ninebot max 30G battery fits the 30G LP

@esnkaz Год назад

@@salehdinkhah6854 I’m sorry have been a bit busy and short answers have been provided. This video is bit old and battery shown here was for Ninebot Max g30. Looks a bit bigger than new batteries. Contact mymaxmods I know they make the LP version as I have installed several to peoples scooters. :)

@salehdinkhah6854 Год назад

@@esnkaz Thanks, I had one more question I want to increase the speed to 25mph, is this all I need to do? just changing the battery to 48v?

@esnkaz Год назад

@@salehdinkhah6854 If you are planing to upgrade to 48V on LP Scooter if controller its unlocked then yes after battery all you will need is motor/controller phase wires connectors upgrade. If controller locked then you will need a new controller with firmware according to company you buy the battery and controller. They should provide you with all tools and info for installation. Maxmods I know they have all you need for a successful installation. I have a lot of videos in this channel for the Ninebot parts installations. Just remember to make the questions to whatever place you are buying parts from and once you are fully inform then purchase your parts. Thank you so much for being part of my channel :) if you need more information about parts and installations you can always look for me on FB group: facebook.com/groups/esnkaz