Best Cool Things to 3D Print in 2022

Подписаться 100 тыс.

Просмотров 3,2 млн

50% 1

Some Cool 3D prints I made recently. Printed on Prusa Mk3 s+ with PLA filament.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you are looking for great and free models, check here ➡ 3dprintshelf.com/
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you are looking for great and unique models, check my designs store - MaDi Studios 👇
cults3d.com/en/users/MadiStud...
Please support me with a Like and Subscribe If you like my videos 😊
It helps me create more videos.. and I'll be soo grateful ❤️
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Watch my other videos about :
USEFUL 3D Prints ➡ • Useful 3D Prints
COOL 3D Prints ➡ • Cool Things to 3D Print
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Download the design from here 👇:
Chapters :
00:00 Intro
00:11 Hairy Lion by _primoz ➡ www.thingiverse.com/thing:200...
00:34 Articulated Skeleton by FlexiFactory➡ cults3d.com/en/3d-model/art/c...
00:54 Platform Jack by Intentional3D ➡ www.thingiverse.com/thing:925556
01:13 Infinity Cube by mjdargen ➡ www.thingiverse.com/thing:499...
01:33 Squishy Turtles by jakejake ➡ www.thingiverse.com/thing:223...
01:57 Pliers by ecoiras ➡ www.thingiverse.com/thing:291...
02:13 Fractal Fidget Star by chuuckaduuck➡ www.thingiverse.com/thing:480...
02:36 Fidget Spinner by Emmett Lalish ➡ www.thingiverse.com/thing:53451
02:53 Egg Container by 3d printingworld ➡ thangs.com/designer/3dprintin...
03:12 Articulated Shark by McGybeer ➡ 3dprintshelf.com/product-deta...
03:37 Puzzle Cube by WildRoseBuilds ➡ www.thingiverse.com/thing:297...
04:09 3D Printed Grass by Superbeasti ➡ www.thingiverse.com/thing:350...
04:37 Air Spinner by walter ➡ www.thingiverse.com/thing:282...
04:56 Glasses Holder by Zyltech ➡ www.thingiverse.com/thing:488...
05:35 Bullet Container by 3dprintingworld ➡ thangs.com/designer/3dprintin...
------------------------------
Let it Go by Spiring / user-57630131
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3vFtPMw
Music promoted by Audio Library • Let it Go - Spiring (N...
------------------------------
Found You - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_found-you
Music promoted by Audio Library • Found You - Atch (No C...
------------------------------
Malibu - jiglr / jiglrmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3lTfPsA
Music promoted by Audio Library • Malibu - jiglr (No Cop...
------------------------------
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
My 3d printer : Prusa MK3s +
Filament used: PLA
#3dprinting #cool3dprints

Наука

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 484

@Marc3DP Год назад

Please support me with a Like and Subscribe If you like my videos 😊 And watch my LATEST VIDEO, you really have to see this😀👇 geni.us/Latest_Video

@marblerunone2go Год назад

Veryyyyyyy awesome crazy cool 👍👍👍👍

@2insane936 Год назад

@Marc3DP What type of build plate do you use so that you can just snap the pieces off of the plate. With mine some of the 3D printed items break, because I have to scrape it off.

@user-vc9dt2jx6k Год назад

😊

@jandrymoreno9513 10 месяцев назад

Mira ya me suscribí puse like to no puede hacer un dragón me lo mandas para acá para Venezuela

@Screamfancast 2 года назад

I hope I can get my 3d printer dialed enought to do things as precise as fidget spinner. Mine was one solid piece lol

@guineapig6582 2 года назад

Ofc lol tune ur printer check out some RU-vid videos on printer tolerances

@bruvkbagel Год назад

bro wants a fidget spinner in 2022

@CesarSalad69 Год назад

@@bruvkbagel whats wrong with fidget spinners?

@ruzgardenizsonmez5990 Год назад

Print moving or articulated things such as "fidget spinner" with a raft and 0.16 or 0.12 resolution

@camtron1967 Год назад

Make sure you gantry is not lose and the bed is level. It could be solid because later lines are if due to loose gantry. I made sure to dial in my printer with print in place tests and I got some really good ones after some trial and error

@Avargatoth Год назад

Thats awesome!!! That Prusa printer is really cool! ive seen them advertised here and there but they print nicely! My son loved seeing that skeleton was really cute with the face haha

@Entferenten 2 года назад

gotta give you props on your tolerances!!! you ought to do a video on tuning your printer

@mybuttcheeks11 2 года назад

I’ve been wanting to do the lion main one since I first saw it 5 years ago! I’m really excited to finally be able to do it!:) great vid I’ll be probably printing over half of these for sure;)

@amycadwell243 Год назад

@Kady3DPrinting 2 года назад

Nice setup

@sushavan5563 2 года назад

Milestone inventions , you draw it you get it.

@donaldwoods6638 Год назад

These are amazing, good quality prints. Nice!

@Marc3DP Год назад

Thanks :)

@simonegorello5337 2 года назад

Wow, thanks for all of this things and models, my printer "broke" a month ago, for me It was very Easy ti fix, but i never wanted ti do It because i'm busy everytime, with this video i games again the motivation to print!!!!

@simonegorello5337 2 года назад

Btw i likes the video and subscribed to.the channel

@craebertstudios1681 Год назад

The way the prints snap off the print plate is so satisfying 0.o

@MADEIN3DPRINTING 2 года назад

Good video ❤️ Keep it up

@koreanature Год назад

Wow... !!! My best friend, It's always great. Your video is excellent quality. We liked and enjoyed to the end. Thanks

@ligangt85 Год назад

Great job! I like it!

@jesstv888 Год назад

Wow, you just inspired me to become an inventor. Thank you so much!

@Marc3DP Год назад

I'm very glad about it :)

@jesstv888 Год назад

@@Marc3DP keep posting videos. You make us dream big. More power to your channel!

@Alex-furry 2 года назад

I love your videos 😊

@YuBongKim Год назад

2:21 this toy is my favorite

@derminin 2 года назад

nice! I am printing the egg container again, now that I have fixed my initial layer, hopefully, this one turns out 🤞🤞

@truestbluu 2 года назад

so... did it?

@Marc3DP 2 года назад

🤞🤞🤞

@derminin 2 года назад

No luck again, took nearly 12 hours, everything seems fine, just won't turn 🤷‍♂️, must have a setting wrong, too impatient to fine tune

@morganerickson439 Год назад

@@derminin I printed one overnight and my gears won't turn. Initial layers are goofy looking.

@kjamison5951 2 года назад

I’m on a budget regarding purchasing more filament and spares. Only necessary items are being printed at present. Practical things for work mostly. Unique designs and not something that can be used anywhere else.

@AndrewTerry 2 года назад

I printed one of the hairy lions and he came out great! You might have better luck with the mane if you dip his head in hot (not boiling!!) water for 15 - 20 secs, rather than using the hairdryer

@Marc3DP 2 года назад

Thanks for the advice, I'll check it out :)

@ceferinout7870 2 года назад

Amazing 🤩

@tacoma87x Год назад

Try checking out your seam placement. Try aligned instead of nearest

@unfunnyfungusmonkey Год назад

0:37 Me waking up in 3 am just to go to the toilet

@5stargames Год назад

Thank you very much

@nathanjjs1335 Год назад

I like the builds good job

@genalynaragon6415 2 года назад

The 3d printed star makes me cry of satisfaction

@Dimmm8 2 года назад

0:43 that's so cool I want to have it

@TheDoomEye 2 года назад

Can you post your slicer settings? Layer height, speed etc... Prints are looking awesome.

@Marc3DP 2 года назад

This is standard Prusa Slicer settings :)

@forlaughs272 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ngz9HlB-GfM.html

@bigsaucereal Год назад

IM GOING TO PRINT ALMOST ALL OF THESE!!

@mark6302 Год назад

attached printed pieces blow my mind

@frenchtoast3444 Год назад

Love your stuff! Big help!

@Marc3DP Год назад

Thanks :)

@troyplayzgames 2 года назад

i am mind-blowned

@optalian9606 Год назад

When i cant watch this vid i listen to the satisfying sounds very cool 😎

@ceejay8328 Год назад

The way the 3D prints crunch when you remove them 🤤😆

@333dog 5 месяцев назад

It’s fun until you realize that it’s difficult and fragile.

@AngeloeyeRd 2 года назад

Very cool

@kamaldhungana9318 Год назад

because in the intro for example I want to make an acoustic soft, but later I want to make a distortion or any other effects in that sa

@hmingmawia5503 Год назад

That awesome👏

@TheOlminiartureworkshop 3 месяца назад

I am eyeing up that infinity cube

@votanloc Год назад

i like you printing so much i ưacth you every day

@MrJerad420 2 года назад

@Marc3DP Great video. What website did you use to get these awesome prints. Thanks for the great video.

@Marc3DP 2 года назад

@J-Rad Thank you :) Mostly Thingiverse and Cults. I will put links in description this week :)

@FACUCRAK 2 года назад

@@Marc3DP Hola puedes subir un link de descarga de algunos objetos? O son si o si pagos?

@Marc3DP 2 года назад

@@FACUCRAK I put the links in the description :)

@GrillaBeef 2 года назад

I think you should do a video where u show some cool Film or TV show 3D prints, like Stranger Things as it’s getting quite popular. U don’t have to, it’s just a suggestion. Keep up the amazing work. 👍🏻

@HiCZoK 2 года назад

how are your prints so clean ? I would like to get into 3d printing but it seems pretty daunting. Are you using low speed? How much time do the prints take ?

@Marc3DP 2 года назад

I think it's all depends on settings. I use 0.20 mm QUALITY setings on PrusaSlicer, it's rether slow speed. How much time - it's all depends on desing, some small 25 minuntes and some complicated / bigger 20 hours. From now I will put on video info about printing time 🙂

@ezepolpizza5609 Год назад

tienes problemas de costuras en las pieas. ese problema tambien puede ser con la funcion de recoveri despues de un corte de luz, genera esos puntos en las piesas

@michaelsfreddo6970 2 года назад

Omg I love this vid

@adikkoh 4 месяца назад

Yo it’s so cool

@SNCARcz 2 года назад

Wow

@keremeser007 2 года назад

What we've been watching everywhere, and you've been putting pressure on it.

@MaxGolfer12 Год назад

I am very proud interested in buying one

@martonlerant5672 2 года назад

I would put stuff like the adderini over "random junk" / ornamentation

@cuaruaocsen 2 месяца назад

🥰😻😻 nice video ❤❤❤ good idea brother

@Marc3DP Месяц назад

Thanks 😀

@GerrettHumbarger Год назад

I just started printing on a Mega S. Everytime I select to have it adhere to plate it makes it extremely hard the get off the plate. Do you have to use the adhere feature or no like I want to print the articulated stuff

@fldsmdfrfromcloudywithacha7954 Год назад

Imagine you step on the red squishy turtle in the middle of the night lol.

@carlosrodriguezborges2990 Год назад

Que genial

@paoloriccardo6626 Год назад

hi I have to print objects in 1/6 scale such as glasses, badges, bags, heads, in 1/6 scale, which printer do you recommend to print well, with a budget of 200/300 thanks

@virtualfishtank6077 2 месяца назад

4:27 when my therapist tells me to touch grass

@Marc3DP 2 месяца назад

😄

@Drpaperwork Год назад

You are the best

@stitch-bd6bg 2 года назад

I love all the animal and skeleton ones

@forlaughs272 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ngz9HlB-GfM.html

@VigneshReyARTS 2 года назад

Awesome 👌🏼

@forlaughs272 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ngz9HlB-GfM.html

@MicrowaveAnimations 2 года назад

this is cool

@JACKNope8689 Год назад

COOL

@codynub Год назад

Love your videos 😍😍

@Marc3DP Год назад

Thanks 😀

@marceloberkramer4329 Год назад

I want this skeleton 😄👍

@ImNotOnGoodKushAndAlcohol 2 года назад

I have been 3D printing alot lately so this was really helpful 😁

@yoso401 2 года назад

I want them all but my favourite is skeleton and the shark and infinity cube

@boyladorin1282 Год назад

The skeleton is my favourite

@Marc3DP 2 года назад

Please support me with a Like and Subscribe If you like my videos 😊 It helps me create more videos.. and I'll be soo grateful ❤️

@liamybanez9902 2 года назад

HOW 3D PRINTER WORKS? I just what to know so i can buy 3d printer at my home

@lakshyachaudhary4488 2 года назад

Can you make a tutorial of how to make some of them personally could you make a video of the shark and maybe toothless the dragon? Pls

@huutiennguyen3810 2 года назад

@@liamybanez9902 , the only one person who are not the only thing that you can do for the next

@huutiennguyen3810 2 года назад

Thigh the same thing bhbbjfh good, the first time, the

@armieelegado6940 Год назад

Where can i get those 3d printed pliers

@alexanderbrucebrown 11 месяцев назад

Your videos are so cool

@Marc3DP 11 месяцев назад

Thank you :)

@sunshinehurricanemix 11 месяцев назад

Brilliant 👏 I really want a 3d printer now 😂

@Marc3DP 11 месяцев назад

Get one, you will not regret it :)

@BlueRose3DP 7 месяцев назад

Good video ❤ Keep it up

@Marc3DP 7 месяцев назад

Thank you :)

@avgjoeshow4208 2 года назад

I see you got links to the models in the descriptions and that’s great but do you think you could put some sort of subtitle on the screen with how long the print takes

@rilollo 2 года назад

If you slice it on cura the program says how long the print will take

@Marc3DP 2 года назад

I will consider this in the next video 🙂

@rickthereal1852 2 года назад

The 3D printed grass can now be used for “real grass” for lege of legends players so they don’t have to get of there set to go touch real grass outside

@ronaldinciong4911 2 года назад

Shhhhh don’t encourage them

@TomasAG_ Год назад

nice videos bro :) where can i find the planter skull that is behind?

@ezavorrr 2 года назад

The skull vase tho

@lazyfpv7005 2 года назад

use alligned seams.. thank you

@patrickcrafter9181 Год назад

I wish I could have the 3-D printed octopus

@ahmetakyel5534 2 месяца назад

Awesome

@Marc3DP 2 месяца назад

Thanks :)

@JuniorTheCreator296 Год назад

I like the skeleton the most

@kennyrogerssegovia5540 Год назад

100/100

@user-tf3de6mh9m 11 месяцев назад

And let them arrive fully put together

@iustinjustin2714 Год назад

I had an idea of my own, so you know about the grab pack hands in poppy playtime, yeah can you make those cause I'm willing to see you making it thank you 😊

@forlaughs272 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ngz9HlB-GfM.html

@aallii11417 3 месяца назад

Hey man! Nice work 🤩 Can you please share the link for the egg container, I didn’t find it on the link that in the description. Huge thanks 🙏🏼

@Marc3DP 3 месяца назад

thangs.com/designer/3dprintingworld/3d-model/Magic%20Planetary%20Egg%20Container-56735

@JMZ_generalYT 4 месяца назад

4:12 Who needs to touch grass when you can touch this?

@Marc3DP 4 месяца назад

😄

@jhonravenvillagracia1767 2 года назад

the cool build is the skeleton

@MagnoTubertine 11 месяцев назад

good job

@Marc3DP 10 месяцев назад

Thanks :)

@gigglymonkeygaming9586 Год назад

This guy hasn't touched grass in so long he made grass

@arielcampagnola1328 2 года назад

Quiero unos re coool

@mohamedazadabdulrahman3226 Год назад

I have an idea. I need a 3D version of Tangram. Instead of making a square with random polygons, you make a *cube* with random *polyhedra.*

@DrewwwTheDude 2 года назад

Man I wish i had a 3d printer

@reazontucker Год назад

4:33 when they tell you to touch grass

@williamanderson2973 2 года назад

The best was the skeleton & the shark

@ericn391 Год назад

How on earth did you make parts fully connect to each other while printing without any issues?

@bred937 Год назад

4:20 when they tell you to touch grass:

@Noob-rv9xl Год назад

For some reason the fractal fidget star reminded me of multiverse of madness star portal

@forlaughs272 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b8lcyZ8R35M.html&ab_channel=THEWAY

@UnifiedInfo 2 года назад

This all looks like decor and landfill filler not to be rude but best should involve more functional stuff. Beautiful pieces through👍

@nightcorelore5648 Год назад

I need a new printing surface first for sure

@WebHead18 2 года назад

How well does that bullet insulate smell? I'm considering it for my dank... ball bearings... yea.

@kikast3r260 2 года назад

Imagine having Prusa MK3 with flex sheet for easy printout removal. This guy, give it to meeeeeeeee

@joseluisblanco3366 Год назад

Muy bueno...!!! Es excelente.👌👏👏 Saludos desde Argentina 🇦🇷 👍

@titanium4074 Год назад

When u have a 3d printer and no car jack 1:11

@gabrielsandoval8977 2 года назад

I like the skeleton

@unknownreality2878 2 года назад

That Skeleton was 🤣

@lopesguilherme2556 2 года назад

You can make anything with 3d impresor