BEST FPV Head Tracker 

As an rc pilot of 50 years, and a full scale pilot of 25, I never even considered the getting lost aspect that new full scale pilots go through! Good catch. One of the early lessons you learn in pilot training is that the instructor distracts you as he's teaching you to get to know the airplane, then asks you to fly home. It sure looks different from up there! I think you just. Saved some people some money.

I made a DIY headtracker (based on the same open source project that Motionsic used). There are 3 things I would recommend to someone trying it out. 1) Keep part of the plane's fuselage in the camera's field of FOV. Many FPV pilots like to keep the camera view as unobstructed as possible when the camera is in a fixed position. But when the camera moves like this, it is easy (for me) to lose the exact orientation and not know if the camera is off-center without a visual frame of reference like the fuselage. 2) On your transmitter have a switch dedicated to override any inputs related to the camera position (from the headtracker or your transmitter's pots/sliders) and center the camera's servos. You want to be able to instantly set the camera to center if anything goes wrong. This has prevented me from having a bad crash. 3) Don't forget about your receiver's (or flight controller's) failsafe positions for the channels controlling the camera. If your control link enters failsafe, you probably want your camera's to center so you can see what is happening. If nothing else, it will help you see where your plane crashes at. :)

I love how modestly Cody is mentioned....dude literally designed the bushmaster and is steady developing planes for one of the biggest companies in the hobby

Good example: If you talk fast enough, you really don't need to say anything that actually explains how to install and setup the device. However, they repeatedly this isn't for beginners. But, they leave our useful information for experienced technicians. Nothing more than a "watch me fly" video.

I built my head tracker out of a $20 Arduino and $5 in parts. Very easy to do. The radio set up was actually the hardest part! But FPV with head tracking is the way to go.

OV-10 Bronco is an interesting aircraft. The Marines had trouble getting a heat lock on it with a stinger because of the massive amount of prop wash.

16 of my planes have that since 2 years ago. My favorite is my freewing Mig29, SU30, AND E-FLITE 90MM VIPER.

Due to my late view this week, I haven't been waiting as long for this one. Fantastic as always.

Thank you so much for this inspiring video. I had to get the Bronco right away and have now enjoyed a dozen of FPV flights with it. Best FPV platform ever 😊

Being old enough to remember when the transmitters was a box about 3 feet square with a big antennae sticking on top, the control stick was an on/off button connected to the transmitter, you had one channel and the rudder would alternate between full left and full right each time you pressed and released the button. The planes were, basically, set up as free flight, and you turned them with the rudder, if you needed to make two left turns, you would press and hold the button (if "left" was the next command) to make the turn, then you'd blip it quickly to get the "right" turn signal passed so you could make the next left turn again. The rudder was driven by a rubber band escapement in place of servo motors. Saw models fly off because the rubber band broke, losing rudder control. Today you can fly one like you're sitting in the pilot's seat.

Nice Video as always! So nice to watch your channel grow😃

another sweet post by TAIL HEAVY P & the gang 👍👍✌

Your narration really reminds me of Warren Miller Ski videos, loved it.

Been using this system for a while on my AeroScout... nothing but amazing fun.. Waiting for another pilot to place a ribbon on their tail for basic combat Robert from motionsic and his friends at blackstar have some great videos on their site... robert is amazingly dedicated and will help if needed... he is absolutely amazingly awesome Great video guys...

This is awesome. Bringing Fpv to mainstream is the way of the future.

I built the exact same unit from scratch myself (No blutooth). Since then, I've purchased two of these. They are great !

This seems so damn cool, and I want it even though I don't even know how to fly yet.I also think the tech could get better for range and such. But, it seems a little to complicated for me, and I would love a in depth video with a shopping list for a full setup, and an in depth "how to" video detailing every step. Nice video, once again!

Very cool. This is just going to keep getting better.

This video is great! Definitely got me even more interested in fpv flying. However a more in depth video showing how you guys put all this together would be even better.

I too have the Motionsic FPV setup on my AeroScout - using DJI FPV googles. Makes a perfect FPV trainer. Highly recommend the Motionsic setup !!!

Cody!!! Flicking awesome brotha

Wow thats so awesome, scale fying in your backyard 😆

Great video Ive just bought a few items I can’t wait to give this a try I’m gonna be using a flight controller and DJI 03 air unit

definitly gonna buy it in a few days or weeks

Good job explaining how to get this all together!

RC flying never interested me, but actually being in the POV while flying is badass.

More fpv content soon please ❤

Sick Bronco!!

I have a challenge for you! Do exactly what you just did in this vid but instead of using the hand remote to fly the plane, use a mock cockpit like they use in flight sims etc . Would be so cool to fly like you were using the instruments in a real plane, and you could also simulate the feeling of turns and pitching etc

Awsome I'm going to do it myself

Noice vid idea!

Cool video ! I want to get into fpv planes one day. Ps also a review on the new twin timber would be awesome. I wonder how well it works for bush flying compared to reg turbo Timbers. I saw 2 bros video and thought it looked like it flew well but would love to see y’all’s ideas on it.

Beautiful

Wow! I need this! 😍😍😍

i feel like this would be great for my flightline f7f specially since i use a 6s batt so theres a spare space cause by default it used 2 4s batts so i have an extra tray and strap and the canopy could probably fit the cam

5:12 "we have workage" 😂

fantastic

FPV is the truth, FPV if the way

Hey I have a question? What cord do I need to connect the fpv head tracker to the goggles and transmitter??

You should do a video on installing and setting up a head tracking system. I know I would love to combine my DJI FPV headset with all my old RC planes

This is exactly what i looked up yesterday lol

I've been doing fpv with dji's equipment recently. While the video link reliability and quality is fantastic, a number of OSD elements don't work unfortunately. Radio link quality being one of them making it difficult to know when you're going to actually fail safe. The heading indicator also doesn't work. You can root the goggles so you can get the full OSD but that requires a fair bit of hacking around.

great content👍👍👍👍

Great video fellas! For anyone wanting to dip a toe into airplane FPV, I suggest checking out Twisted Hobbys Proxy (aka Crack Vision) with a fixed integrated FPV camera. It is a blast to fly on the goggles, and easy too because of the lighter wing loading. It's fully aerobatic and can be flown in tighter areas.

Impressive 👌

this is so cool :D

The munchies are half the trip dude.

That's cool. No issues with Interference between DJI O3 and Spektrum RX I guess? What about O3 not sending full power video signal since not linked to flight controller? Did you get enough range? I was about to order motionsic gimbal and sensor/buddy box for my O3 and came across this. I wish they made it wireless buddybox. Thanks for the video.

I have watched Robert’s videos and it got me interested. I purchased his head tracker and gimbal and installed. The problem I am having is I can pan but not tilt. I see in my servo monitor screen the servo moving but the camera does not go up or down. Haven’t flown FPV yet and figure I could being able to look L and R. Any suggestions for the setup to correct this in Spektrum NX8???

This would be a dream come true for me. Piloting RC planes normally looks really hard and piloting a real plane is scary 😂 as a gamer I’ve always dreamt of something like this.

well done

Its so cool with a twin engine aircraft for some reason

Thanks,, any idea what is the range of the head tracker and the dji air unit? Please also put a link for an ERLS and a flight controller that would work with radiomaster TX16S (and Spketrum NX if possible). Thanks

If you switch to the ExpressLRS control link you can easily give yourself multiple miles worth of range. I was surprised to hear warnings about range and penetration in 2023 when a tiny palm-sized quadcopter I built on my kitchen table last year has at least 5km of range which is only limited by the relatively low-powered 350mW VTX and a small battery. There are even PWM receivers for it so you don't necessarily need a flight controller.

Will it get hooked up to a joystick and cockpit controls to get the full experience?

I believe this is the same thing as the adrinuo nano. It's a $20 board, it has built in Bluetooth. I have mine setup with Bluetooth. It's a pretty awesome headtracker and cheap. I only have $20 invested in the head tracker and $15 for the Bluetooth module for my TX16s MKll.

Can you do a review on the new twin timber without propstrike…

Hi guys, I have an Oculus Quest VR glasses lying around, can I refurbish them to be used as FPV glasses? Any clues or ideas would be appreciated. My vision is to add a HDMI input to them and use a small webcam as an input. rotation is not required, and also I do not need small latency, I wood definitely not use it for racing, just in slowly moving R/C models. not even flying, maybe in a car model.

Equals an x wing thermal dynamix propeller to spin from the vacume

A Bronco? Nice!

lmao that opening sentence

trying to get into the FPV drone/uav hobby. any idea for a starter headset and model?

What camera do you use?

Would this work on an RC car without a line of sight connection?

Iv wanted to mkake a setup like this for awhile. How much would it run you goggles and all?

An exceptional thing would be two cameras providing stereoscopic (3D) image that gives a sense of depth.

Could a glass or see-through canopy work out, and what materials could be used for one?

that intro caught me off guard

Hope you guys make a vid on new timber twin 1.6m

Cool setup. Set another camera up at the bottom then you can use it for surveillance

Can you do the full scale rc v2 next

Way cool. I'd like to look 'up' relative to the aircraft more, so as to look further into the turn for better depth perception: trajectory control/obstacle avoidance - like flying a real airplane.... Amazing though! well done.

One love your Chanel. Two I have a question for you . I’m 14 and me and my grandpa went rc flying for about 3 hours it was fun but I use his 30 year old spectrum radio and all my different planes are on it. Ok now to the point, it won’t Change models anymore and it’s just real old so what’s your recommendation for a like 6 channel multi plane radio.

Hi, may I know for the dji fpv system to work with the dji fpv goggles, what must the air unit be connected to? For example, must the air unit be connected to a receiver, flight controller, etc, or can you just connect the air unit solely to a power source such as a 7.4v lipo battery?😃

How much does it cost to get a fpv camera unit and vtx that has such a clear resolution??

Can you guys please do the review of the new twin timber

Nice, but would be better to use a Stereocam system for an immersive 3D experience. Objects will appear truer to life by allowing a real sense of depth of field wich is essential in flight to better estimate the distance to your opponent. - Try the Skyzone 3D FPV Goggles Kit (3D Camera, Dual Transmitter, Dual Receivers). - The BlackBird 2 3D FPV Camera. Recommended for a radio controlled model aircraft. - LUCIDCAM - immerse in VR with 3D Tech: Field of View 180° x 180° / 2K-mp4/60fps with dual mics. (Its housing should be removed first)

Is that like a vr but in real life?

whats the difference from your 90$ gimbal and the 5$ from aliexpress?

Can you guys do an EDF jet take off and landing tutorial video?

so you might have to do an immersive fpv wall ride

For those who like to mod-hack existing designs = to reduce the air-pressure on top of the wings = angle the tail-horizontal-stabalisers to pitch down Leading-edge of wings to horizontal-stabalizer(not front-edge to avoid rough switching top-bottom air-flow) Reduce that line by about 30% to have the air-flow under the stabalizer for rear distributed-structural air-support.

Hello. Can you give a link to the drawings of your model, on which you put the camera? I would very much like to repeat it for experiments with FPV.

So I bought this motion fpv stuff but I didn’t realize I needed googles … I thought they were part of the head tracking kit. Can anyone tell me what googles work for sure?

Motionsics bag is real nice, but I like blackstar fpvs sidewinder head tracker setup better!

Any tips for organizing an FPV club in Canada? Southern Ontario specifically

I’m a kid and it is easy to use

Awesome video! I saw that you powered your air unit with a stand alone battery. Do y'all have a video on that, or can you point me in the right direction? Thanks!

Share settings on that trainer/ slave set up please!

Where do you guys fly out of? Ohio here.

Maybe I missed it but did you mention drift? That was the problem with my last head tracker.

interesting, for YEARS there have NOT been a HT on the market to buy. there was one about 7 years ago, but until now its been no one. you had to build your own.

Think this would work in a race car? I’m thinking an oval track with this system. Track would be smooth.

What would be even cooler is a seat with a stick, throttle and rudder pedals for remote control !!!

SJI fpv.... what was that again?

BRUH NOW ITS SOLD OUT,,, OF COURSE

A bit more refinement and i will want one. Just need a real control stick and throttle and maybe a HUD Be great for us old pilots

The only thing this needs is roll tracking so the head tracking is fully immersive.

Next step is two cameras with parallax so stereo vision

I wonder if they'll work for the personal missile system I'm building for my backpack.. Or was I going with mini attack drones.. I can't remember... So many evil plans..