Best Sounding LS CAM? ZL1 BTR Stage 3 Dyno with Tuner Commentary!

Подписаться 6 тыс.

Просмотров 31 тыс.

50% 1

Alex explains what to expect from a BTR stage 3 cam in a Camaro ZL1!
Was this helpful? Like and subscribe if you learned something!
We offer the best E Tuning services in the industry- Have Alex personally tune your car
www.bcpetuning.com
We have all the parts you need for your build- Don't see what you need? Just email for a full quote!
www.boostcontrolledperformance.com

Авто/Мото

Опубликовано:

20 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@Godsblessings1111 4 года назад

The BTR stage 3 cam with full boltons are at 668 whp and 659 torque. I do need to add a secondary fuel pump to get my ride right around 700 whp. At 10.2 lbs of boost. Tuner says we can get it up to 14 lbs of boost with the fuel pump and lower crank. Running 50/50 on the fuel for now. And the Corsa Sport exhaust most definitely parts the skies! Wicked Loud! ✌

@SoftiesTruck 4 года назад

Bad ass car! What size upper Pulley are you running? Is the blower ported or stock?

@Godsblessings1111 4 года назад

@@SoftiesTruck I am running a 2.45 upper pulley with a stock blower. I will be adding a 9.55 lower pulley and the secondary fuel pump and should get me to 80+ more hp at 14 lbs of boost from 10 lbs as of now.

@cuzimaluzer777 Год назад

What horsepower numbers are you at now?

@Godsblessings1111 Год назад

@@cuzimaluzer777 I won't know until 9-29. I added a Magnuson 2650 Supercharger, ported the heads, but they didn't have the adaptor for the NW 103 throttle body when it was installed. Was unable to add the BG 5" cold air intake. I am also breaking in the Monster S triple disk. They will put all together with a smaller upper pulley as well. We will dyno the same day. I will respond with the final numbers. ✌

@mooremaceo 2 года назад

Still love them 5th gen ZL1's!

@cbrock9219 3 года назад

I am quite impressed by the technicians feed back!! I would love for this man to work on my SS!! Where is this man Located?

@keithgore6285 3 года назад

Livonia, MI

@richgendron9999 3 года назад

Wish you guys had package pricing on your website 🙁 it would make shopping better

@DeibbyPirela-me2qc 3 месяца назад

Saludo lo Camaro lo mejor

@elliaspalmares9053 2 месяца назад

2013 how many miles did it have before the BTR cam? If it's high mileage, any concerns with the added horsepower?

@Chewie374 Год назад

Wouldnt you get more power just by having a better supercharger with just only headers?

@josephflores3135 10 месяцев назад

For an ss ls3 supercharged whats a safe horsepower that the ls3 can handle with e85

@brianmonahan489 3 года назад

I’m looking to get a cam kit for my car (2014 Zl1 auto) but don’t know all the specs or what to pick when it comes to choosing said cam kit. Not looking to make more than 650/700whp. Was looking at BTR and TSP but still unsure

@Godsblessings1111 3 года назад

I think you would be very happy with BTR stage 3 cam. I decided on it along with TSP 2" long tube headers w/3" catless x-pipe, Corsa Sport exhaust and it screams with performance. I added other bolt ons as well. I am very satisfied with the street mannerism, yet the performance is there when you want it! Best of luck on your decision ✌

@jimmydean4638 3 года назад

Thats a lot of power for being on pump gas! 91?

@kanervatie Год назад

Yeah, I'm more of a "how it sounds"-guy, than "how much power does it make"-guy.

@tommyd4784 4 года назад

make sure you are sitting down before you get to 4:31

@davesharpe5310 3 года назад

I have a 2010 camaro 2ss M6 Tran. I'm making 543crank hp atm. With stage 3 btr cam upgrade, 410 gears upgrade, and clutch upgrade. Approximately how much hp/ torque will I gain. Also I'm adding a procharger blower in a few months once I save up for that, is this a good move or will I be good with what I'm adding now? Thanks

@olveramelinda 2 года назад

I’m at 636hp and 660 tq L99 fbo whipple 2.9. Stock internals at the crank .

@duramaxnash 3 года назад

What exhaust set up? 👅

@Ryshann 2 года назад

2 inch Kooks long tubes into Corsa ZL1Sport exhaust.

@ramoody37 4 года назад

I have an Audi S6, do you guys tune these models as well!

@keithgore6285 3 года назад

Bro they work on everything

@nickfappiano3509 3 года назад

is this a stage 3 blower cam or N/A cam? Do you now the specs?

@boostcontrolledperformance1523 3 года назад

LSA Stage 3 cam 231/248 .617"/.595" 120+5

@brieonrandle255 2 года назад

@@boostcontrolledperformance1523 do you guys think a ZL1 stall could handle a btr LSA Stage 2 cam?

@Ryshann 2 года назад

@@brieonrandle255 I’d say it’d be fine and wouldn’t hurt anything but will most likely be a little jumpy at low speeds but drivable. Depends how long you wanna drive it Like that before getting a converter.

@Anthony-nc2dv 3 года назад

I done the BTR stage 2 kit 2.23" they garunteed 100 at rear wheel. Is that possible?

@olveramelinda Год назад

Sound about right

@stephendwinells8260 2 года назад

What about a cam and whipple can you run pump gas? I just whippled my cobra and I can’t run pump going up to 23 pounds of boost. What’s it like with the LSA’s

@user-mm1se7gy7e Месяц назад

Best 'sounding' camshaft? How about the best camshaft for tha application, screw the 'sound' !

@boostcontrolledperformance1523 Месяц назад

But did it sound good?

@user-mm1se7gy7e Месяц назад

@@boostcontrolledperformance1523 Uhhh, yeah . . 😆

@jamesvelvet3612 3 года назад

All that noise and a Model S puts it on the trailer ;-)

@littledeel 2 года назад

Stupid electric junk

@darkstars3247 Год назад

I literally just saw a video of a zl1 beating a tesla sit down🤣🤣

@jamesdriscoll2478 11 месяцев назад

well the guy in the p75d i walked away from in my 2.38 upper 2nd gen v thought the same thing and the model 3 and the suv…. all lost on the highway so yes they are fast but not that fast caddy 3 tesla0