Bicycle Tire - How to Put Rear Wheel Back On My Bicycle 

I was stuck when I took off my rear wheel to fix a puncture, I couldn't get it back on. I looked up this video on my mobile phone and following your instructions was easily able to fit it back on. Many thanks you saved me a 15K walk!

My confidence level knows no limits now that I've removed and replaced a rear tire. Thank you!

saved a noob from tears, could not see clearly enough in other vids to understand how to pull back the derailleur, spent two days putting it back together incorrectly, thank you !!!

Thank you so much! I got a flat in the middle of nowhere this weekend. I changed my inner tube no problem and then I got stuck. It was hot and I started to get frustrated because I couldn't remember how to get my tire back on. And literally every other video forgets to mention the spring loaded bit with the chain. You saved my sanity, I completely forgot about that. 😅

This is the best illustration I have seen, it seems to be easier to get the job done by flipping the bicycle upside down. I had tried to do it with the bicycle right side up without a repair stand, I had no luck.

Wow, I was overthinking this.

Thank you! From all the videos I've watched, yours was the only one that taught me why I couldn't fit the wheel properly (it was the adjustment of the derailleur)

This video was life saver. It was straight to the point, simple to follow, and also got me to school (albeit late cuz of a flat in the first place, lol).

Thank you. I've watched 30 videos before yours that either didn't zoom into the axle area at all (!?!) or were too fast and vague. God bless you, you deserve the best in life.

thank you! my rear wheel FELL OFF last night when i was halfway home late at night! luckily a passerby knew how to do this! now i'm watching videos so i can understand it better. you made it look easy! thank you

Awesome truesome.. U struggled for 20 minutes and ended up with a back pain.. With this video it just took me 2minutes to get it done.. Thanks a ton

Thanks for being so straight forward with it! Fixed both mine and my little sisters bikes so we can go riding this summer!!

Awesome thanks. My gf is bothering me to fix her bike, never done it before, this video helped me to be more competent and thankfully I dont look like a useless idiot. Thanks mate. She doesnt have to know I learnt it from youtube 😄

I usually don’t comment on videos. But this video was so helpful and done to earth to follow. Thank you so much!!!

I've had to find a video every time I've done this to avoid forcing it in and this is the first time its actually helped, no heaps of information thats useless to the task at hand and explained thoroughly enough for someone with little bike maintenance experience can understand with ease.. Great video mate just earned a sub

This is what I love about RU-vid. If I can't figure something out I know I can find someone to show me. Thanks for posting.

You really saved me a lot of headache when building a new bike. The instructions didn't show how the chain should sit on the gears, and I was frustrated until flipping it as you suggested. Thank you man!! Heads up though, anyone doing this, just be careful the chain doesn't get tied up. Carefully lock the wheel in, and then carefully flip it back over. Fun learning experience! RU-vid FTW!

I just want to say this has been my emotional support video every time I remove my rear wheel haha. Really good tutorial helps me every time. Thank you!

Thanks so much for this tutorial. So many videos about changing inner-tubes and had to retype the search and still scroll to find this video. Saved me a long walk home.

I know it probably sounds completely crazy, with a 12-speed rear cassette I really could not get mine hooked up and mounted. Your trick of hooking it first then aligning it afterward made all the difference. Thank you! Brand new intense tazer BTW

Wow I'm 44 years of age and didn't have a clue how to do my boys bike back wheel lol I was going off my head found this video and it took 2 seconds bikes are different these days lol in the 80s they were just 2 nuts to do up lol thanks for video

I DID IT 🎉 thanks for this video. I was trying to put a 1000w emotor on the rear wheel and saw it as impossible but this video guided me. 🙌🏾

Brilliant short vid, quick, informative and to the point! This is exactly what I look for when looking I'm for instructions and guidance, well done mate 👍🏼👏🏼

Thank you so very much! I removed the rear wheel on my Huffy Sienna 7 speed, which sadly was necessary, in order to replace a fender, due to a small screw at the tail end that could not be reached with the tire in place, though naturally every other dang nut and bolt could be. It was after I replaced the fender and went to return the wheel that I realized... utoooh.... LOL So... thanks to you I was able to successfully reseat the rear wheel, in mere moments rather than hours of trial and error. :) Thanks again!

So helpful and easy to follow. Too many other videos show how to change tire using a rack. Thanks a lot!

Honestly mate you saved my day. I was riding along and my back wheel just fell off 😭🤣 it was literally only because of this video I didn’t have to push my bike with 1 wheel and carry the other on my shoulder for 2 miles

This just helped me just now Was having difficulty but I watched this and I was able to pop it back in Thanks

Thanks! My brother has always put my bike on the Wahoo Kicker and taken it off for me and now that he is in the army I was struggling 😬 Thanks for the video, you saved me a lot of stress! 👍

I was really stuck on this pit looked up how to do it watched your vid and got it on with ease thank you so much

Appreciate this! After fiddling and getting frustrated you saved my bacon. To the point and very helpful.

This dude is a legend... Simple and easy tutorial 🚴🚴🚴 bike life...

3 hours ive been trying watched your video for 2 mins and boom! awesome job thank you

This video saved my Sunday, thanks!

You a wizard! Should have watched this before getting my hands all black, without my rear tyre on 😏

God bless you, man! You just saved me. I watched a million other videos and yours made it so easy. Crossing Canada soon 😁😁😁😁😁😁😁

This helped me. It's impossible to figure out without watching this. MAKE SURE you put the chain back on the gear it was already on when you took it off. Just put it on your highest gear (smallest cog) to make it easy.

Thank you so so so much. You have no idea how grateful I am. Once again THANK YOU

Thanks for this, was stuck for a hour couldn't figure it out, watched this video and done within 2 minutes, many thanks liked and subscribed

you finally made this make sense to me!! after years! Thank you!

Thanks... this was super helpful. (Still, you made it look easier than it is... what took you 90 seconds took me half an hour lol)

Thanks for making video short and very specific!

Saved my bacon, thanks for the helpful video!

Very helpful. Thank you!

Thank you so much for this video! It helped me a lot with my spare bike.

Exactly what I needed. Thank you!

So helpful! Thank you ❤

Many thanks for saving my day with your video.

Thanks so much for the warning that the chain can pop/spring back!!! I had never done this, so thanks for the help.

I appreciate this as this video shows how to do it upside down while others have a whole contraption where it's right side up and hard to fallow on a upside bicycle

Thanks so much man I forgot how to put it back on this helped me so much

You did a good detail of reinstalling the derailer Thank you.

Great video showing how to work the chain!

clear and concise. very well done

Absolutely fantastic video. Thank you!!

Make sure you're in the smallest gears to give the chain more slack.

Thanks, Just used this to put my Gf's tire ac on lol

Thanks so much for doing this. Short and sweet!! Cheers mate.

Thank you for sharing this video. I am so happy that I was able to replace my rear wheel back in its place with help from this video. :)

Short and simple! Super helpful video

Thank you so much for this - after a long day of trail-riding I pulled my bike out of the car and off the wheel popped. 30 mins later I was stress crying about to throw the thing across the garage 😂 pulled your video up and 5 mins later it was back on!!

This actually works thank you

Thanks very much for the very clear lesson. It’s one of those things that’s almost embarrassingly easy once you know how.

Thanks for a refresher. Mine was a bicycle break pad slightly bent and disc wouldn't go in. All fixed now :)

great instruction and brief 5 stars, many thanks

I just got a new Specialized. This is not the first time I've ordered a bike by mail (some people are astounded when I tell them this). Ironically I never had a problem with my GTs and they assembled like butter needing very little adjustment. Just a few tweaks to the limit screws is pretty much all that was required for the most part. All of my groupsets in the past have been 9x3, but at some point between my last bike and this trail bikes have started adopting the 8x2 groupset. That's not really an issue, but this is the first time I have encountered a this particular groupset. Also I've used Shimano indexers in the past, but this is my second Microshift. Again, not really an issue, but something to note. Anyway, I cannot for the life of me get the bolt aligned. The derailleur keeps pushing towards the brake calipers, so the rotor starts hitting the frame before it gets anywhere close to the calipers. I can't push towards the derailleur without bending it, and I shouldn't anyway. All my other wheels just roll right in like butter. I'm starting to think that the limit screws are not set correctly, or there is an alignment issue. Upon visual inspection it looks like it's aligned properly, but without a proper tool I can't tell for sure. Really disappointed in Specialized, which I thought was a reputable brand. Oh, I was also missing two stem bolts. I'm going to have to fork out another $200+ to get it properly assembled and tuned it looks like. Despite their claim that they ship their bikes adjusted and needing minimal assembly.

Exactly what I needed to see - thanks mate

Thank you for sharing the knowledge. It was saving

I thank you for making your videos, I was scared to break my gears!

Lifesaver. Thanks, man!

This video really helped and encouraged me to keep on going I was going to give and let my dad do it but then I saw this video and it really helped.I’m done now and it’s perfect great video👌

thank you bro this saved me so much!

Thank-you! I’m an idiot when it comes to stuff like this and the video helped!!!! 🎉

Mate thank you for this.

I did it! Thanks to you.

This video is really helpful.

Thank u, saved me a day of hassle ☝🏾

Wow so thats how you do it!! BIG HELP BRO!! Thanks!!

Short and very good video ! Perfecto

Nice one pal. vid helped me work out hire to put my lads wheel back on 👍

Good heavens, this is so much easier to do with the bike on its back, thank you! Ffs, this was harder than the whole tire replacement :)

I didnt know it was this easy! Thanks ma man

Thanks so much!

Thanks man big help

Thanks bro helped a lot RIP Mechanic 😂

I've been stuck on this all day!

Very helpful vid 👍🏼👍🏼

Bro thank you so much, this video is reall, helpfull!

video helped me alot...thaks

Life saver! Thank you

I love you your the man keep up the work god bless

you are one beautiful man, thank you hahahah

Tanks you very much

Thank you!

Thank you so much!

Thank you very much after an hour thanks ❤️

thanks a lot bro. it helped completely 💯

Lol I did this countless times 5 years ago and now got stuck, just seeing how you put bike wheels up made all the difference.

Thank you.. this saved meeeeeee ❤️❤️❤️

You helped me so much

Tjank you bro you helped me alotttt