Тёмный
No video :(

BIG UPGRADES For Bass Van Build w/ NEW Wheels BIGGER Tires & HEAVY DUTY Brake Install -EXO Car Audio 

EXOcontralto
Подписаться 657 тыс.
Просмотров 109 тыс.
50% 1

Who's ready to take this big audio build to the next level!?!? Today marks a VERY FIRST for me... installing new upgraded wheels, tires, rotors and pads! Spared no expensive choosing the highest quality brake parts and most heavy duty rated rims I could find 😀 Let's get this party started and increase our ride height in the process!!!
Thanks For Watching, Everyone!!! 📺
Help Support The Channel :D
/ exocontralto
Shop For Everything Car Audio!
showtimeelectr...
Follow Me Here:
/ exocontralto
/ exocontralto
/ exocontralto
NEW PARTS: Quick Links ✅
Lighter Wheels: amzn.to/3w1IsYl
Bigger Tires: amzn.to/3yXVOqd
Better Rotors: amzn.to/3uSBGT8
Best Brake Pads: amzn.to/3iesxSc
Extended Lugs: amzn.to/3ppK0Zt
Inside Today's DIY Installation:
1: How To Choose The Right Size Wheel
- Choosing correct sized wheels for your car or truck isn't always easy. Today I show how I personally picked out brand new rims by using the stock measurements and maximum dimensions to gauge a good fitment.
2: Increasing Factory Tire Size
- The current stance on the van isn't exactly the best looking, but after widening the tires by over 15%, the rear end doesn't look skinny and small from behind anymore. I increased rubber from a 245/70/17 to a 285/70/17. It should help improve ride quality by having a larger taller sidewall to cushion the suspension system. The profile isn't too tall to cause excessive body roll or left to right sway.
3: Removing Stock Wheels & Tires
- Taking off the existing steel wheel tire combo, mounted with Firestone Transforce HT treads, designed for highway terrain but they don't have that aggressive looking tread I'm looking for. Avoiding a negative offset combo is extremely important.
4: Cleaning Rust Off Surfaces
- Using a wire brush to clean any surface rust off the metal. Coating with lithium and silicone grease to keep things from getting stuck together. Seized up auto parts are never fun.
5: Removing Caliper Assembly
- Had to remove the torque member bolts from behind the calipers to safely replace better pads. The hoses were luckily long enough to set the entire housing onto the ground without kinking or pulling on the brake hose line.
6: Installing Rotors & Pads
- Compressing the pistons was extra easy, only had to compress each piston about 1/8 inch because the standard pads were barely worn down.
7: Painting Calipers Black
- Sanding down, prepping metal, and masking off important areas with tape to paint the bare calipers gloss black. This will protect from rusting, dust, and prevent other forms of automotive corrosion.
8: Mounting New Wheels & Tires
- Time to mount up the new combo! Weighing the same amount as before at 79lb, this new combo will help maintain a strong drivetrain without pushing limits on wear and tear for the differentials, gearing or transmission. The speedometer will also only be inaccurate by a tiny number. If my needle is at 70 mph technically I'll be traveling at 72.7 mph.
9: Burnishing / Breaking In Brakes
-After installing the brake job, it's very beneficial to "burn in" or "break in" the new pads and rotors. This transfers a layer of ceramic material onto the face of the rotor, adding to increased stopping power from adhesion. These transfer layers add performance when you need to STOP FAST!
10: Enjoying The AWESOME LOOK!
Aftermarket Wheels:
Link : amzn.to/3w1IsYl
Model: MR315 / Method 315
Color: Matte Black with Simulated Beadlock
Backspacing: 5.8 inches
Offset: Positive +25mm
Wheel Diameter: 17
Wheel Width: 8.5
Hub Bore: 130.81
Load Rating: 3640lb
Material: Aluminum Alloy
Weight: 28lb
Bolt Pattern: 8x165.1 / 8x6.5
Biggest All Terrain Tire Upgrade:
Link: amzn.to/3yXVOqd
Model: Bridgestone Dueler A/T REVO 3
Section Width: 285
Aspect Ratio: 70
Rim Diameter: 17"
Overall Diameter: 32.8"
Rims Range: 7.0" to 10.0"
Weight : 51 LBS
Load Index : 121
Load Range: E1
MAX PSI: 80 PSI
Speed Rating: 106 MPH
LT285 /70 17
Beefier Rotor Upgrades:
Link: amzn.to/3uSBGT8
Model: Raybestos P-300
Coated, Vented & Grooved
Heavier Duty Pads:
Model: Akebono ASP1411
Link: amzn.to/3iesxSc
Increased Surface Area
Full Ceramic Pad Kit
Custom Caliper Paint Kit:
Link: amzn.to/3fPy8ww
Black 2 Part Epoxy Paints
Extreme High Temperature Rating
Extended Thread Lug Nuts:
Link: amzn.to/3ppK0Zt
14x1.5 Closed End Chrome Lugs
Vehicle: 2018 Nissan nv3500 SV
Low Roof Edition Cargo Van
Parts Purchased from Amazon, Rock Auto & Custom Offsets online web store.
Music By: RU-vid Music Licensed under a Creative Commons Attribution license
(creativecommon...)
Enjoy the Vid? SLAP A LIKE! 👍
NO Garage? NO Problem!!!!
More EXTREME Stereo Installations and Fully Explained Tutorials & How To Videos Coming!
EXOcontralto
Bassheads Unite 2021

Опубликовано:

 

3 июн 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 489   
@EXOcontralto
@EXOcontralto 3 года назад
NEW UPGRADES for the Behemoth Build 😀 It looks soooo much better now!!! Thanks For Tuning In 📺
@xgndynastyy2676
@xgndynastyy2676 3 года назад
Are you going to slamoligy
@FUCKDSS
@FUCKDSS 3 года назад
I hate to say it but you should get some longer studs man I'd hedge on the side of saftey with the increased weight
@skity1233
@skity1233 3 года назад
I cant wait
@alejandraparedes5551
@alejandraparedes5551 3 года назад
Wonder what time you gonna put the car audio
@jessiej3991
@jessiej3991 3 года назад
I painted my driveshaft with rustoleum 900 degree brake caliper red
@IchabodCraneMD
@IchabodCraneMD 3 года назад
Love hearing your thought process on why you choose and don't choose what you want. Really makes it an enjoyable watch. Thank you for the amazing content.
@lasens
@lasens 3 года назад
This must have took AGES to edit. cant wait for the finished build!
@jimmycrackcorn1783
@jimmycrackcorn1783 3 года назад
EXO works hard only dude on RU-vid id want to smoke w and shoot the shit
@RyanBassForLife
@RyanBassForLife 3 года назад
I love EXO video edit skills. He edits his videos better then a TV 📺 show edits there broadcast💯
@AliMohammed-yo9op
@AliMohammed-yo9op 2 месяца назад
Still waiting 😂
@mathewboyer5141
@mathewboyer5141 2 года назад
I came across this video in the worst mood ever. And I'll be this guys excitement over some wheels and tires put a smile on my face. I'm happy for dude. To see where he's come from shirtless, worn out jigsaw blade cutting 1.5" thick baffles for some 18's in a 2 door to where he is now and he's never lost his good spirit and his love for car audio. If I wasn't homeless and broke I'd love to donate to his Patreon. EXO thanks for the smile Man. Keep doing your thing man. You deserve all the love in the world.
@ugkforlife8405
@ugkforlife8405 3 года назад
The grooves in the rotors are called “slots”....those rings at the end of the video look like hub centric rings...they go on the inside of the wheel to help center the wheel on the hub ...this reduces unwanted vibrations while driving
@JasonWW2000
@JasonWW2000 2 года назад
No, they are actually load bearing. The weight of the vehicle is transfered to the inner ring of the rim. If the rim bore is too large you will have all the weight transfered to the wheel studs. A little driving and a few potholes and the studs will shear off and you'll lose a wheel. I've seen it happen many times.
@jacobstansberry4114
@jacobstansberry4114 3 года назад
I am falling in love with this build every episode and I can’t wait to see the final finish!! Keep it up man I’m enjoying it
@raneynickel7443
@raneynickel7443 3 года назад
Definitely my new favorite channel! Most people don't "do" anything themselves anymore - so happy I'm not alone!
@NoblePineapples
@NoblePineapples 3 года назад
Have been watching you for YEARS now, and no matter what there is always something new that you've taught me. Thank you for being you.
@randomweirdyoutubechannel8955
@randomweirdyoutubechannel8955 3 года назад
This going to be an absolute beast enjoy it man!!!
@Bigbody19
@Bigbody19 3 года назад
Dude holy fucking shit. I remember when i first started watching. 10 years ago in that van. I still remember when you first got the Expedition gifted to you!! IT FEELS LIKE FOREVER SINCE I'VE WATCHED YOU!! THE COME UP IS REAL!! And the humbleness remains. Man i feel old.. I was just a kid when i first found your videos, now i have my own kid..
@VICE1385
@VICE1385 3 года назад
My heart dropped when he said Harbor Freight
@Matty.Hill_87
@Matty.Hill_87 3 года назад
The van was probably close to dropping as well 🤣
@mrHello420__
@mrHello420__ 3 года назад
Are they so bad?
@user-ib5mx8ro4k
@user-ib5mx8ro4k 3 года назад
A poor craftsman always blames his tools... stick to the fields
@budgetreviews3530
@budgetreviews3530 3 года назад
Hey, atleast they worked for one round, and got the wheel and tires on. Ha
@I1S1337
@I1S1337 3 года назад
Small tip, when jacking up a vehicle with a solid rear axle you should Jack it up from the differential (not the frame) and put your Jack stands on the axle, this avoids unnecessary strain on the opposing wheel and suspension components. The frame is fine when using a lift. Just wanted to share my input as a tech. Love your vids and I’m excited to see the outcome of your project.
@kevind5508
@kevind5508 3 года назад
At least he used gloves when installing the new pads and rotors. Small step that's usually missed. 100 percent though always go under the axle.
@herculesbrofister265
@herculesbrofister265 3 года назад
Use the force
@chanceatherton575
@chanceatherton575 3 года назад
Someone may have already mentioned this, but make sure to re-torque the lug nuts after a couple of days. Since this is your first set of aftermarket aluminum rims, I wanted you to know that they have a tendency to "loosen" up after driving a bit. Not all do, but many do. Just check them to be safe. Looks great, man!
@RobPollen
@RobPollen 3 года назад
silver paint pen for the hub lettering
@zieske98
@zieske98 3 года назад
Next time you use Jack stands remember they need to be on a flat surface on the frame, your backup stands would of failed because they were located on the upward angles on the frame
@erikanderson3633
@erikanderson3633 3 года назад
I was going to say the same thing… how you going to be so extra cautious about having backups and then put them under an angled part of the frame?? 😣
@skity1233
@skity1233 3 года назад
Wow i get so exited for your vids
@bobbybrown2683
@bobbybrown2683 3 года назад
For the people who gave a 👍down you crazy he did the right thing because of the system and he's going to drive it. It's what's best for the truck. I like it myself its a nice fit for the truck 🍻
@athotboy5050
@athotboy5050 3 года назад
Exo is on point, I love it. He explains things so well, which for people like me with OCD makes his videos very entertaining. There's usually a 1:4 rule of thumb, which is every 1 lb you save in unsprung weight equals to about the same as taking 4 lbs of sprung weight out of the vehicle. Adding a heavier tire could've potentially furthered the limit of the amount of equipment that could've been held in the back, since it will already be so close to its weight limit.
@paulbolduc1082
@paulbolduc1082 3 года назад
I was thinking and EXO logo would look good on the center caps
@kellypg
@kellypg 3 года назад
This would be awesome.
@xSpicySaltx
@xSpicySaltx 3 года назад
been watching you since i was 13. its crazy im 21 now
@eddiemunster143
@eddiemunster143 3 года назад
I love how technical you are about everything. I’ve been to plenty and entered many sound offs here in south Texas. You definitely give us a run for our money.
@AndromedatheBasshead
@AndromedatheBasshead 3 года назад
I've been following this build since ep. 1. It's refreshing to watch someone do what they truly love. You've inspired me to do what I can with my builds. I can't wait to see the end result of this behemoth! I hope to be able to get a demo if I make it to the shows. It would by far be the biggest build I have sat in. Keep doing you, you're good at it!
@americanoutdoorstv7648
@americanoutdoorstv7648 3 года назад
Been watching you since i was a little kid. its amazing how much better your content has gotten, and how much the channel has grown. i hope you continue doing this with the same enjoyment and quality. loving it.
@McLennox
@McLennox 3 года назад
Okay, so let's talk about unsprung weight. Wheels and tires are a key part of unsprung weight, and the benefits for reducing it are insane. In the performance car world, reducing unsprung weight has exponential gains. I've heard that losing 40lbs of unsprung weight is the equivalent of losing 80lbs of sprung weight. The more you know. Also: it would have been really cool to see the before/after of the sliding door with the new setup
@Bob_Smith19
@Bob_Smith19 3 года назад
It’s a van not a sports car. He reduced unsparing weight and reduced the resilience of the wheels at the same time. It’s easy to bend a steel wheel in a loaded van. Aluminum is going to bend a whole lot easier I’ve been driving a fully laden van at work for over two decades. Wheels bend easier than you think.
@asherdie
@asherdie 3 года назад
Ok, now talk about it in the context of a slow moving, heavy vehicle.
@thedude6046
@thedude6046 3 года назад
I'm seriously very excited to see this done! Looks like you have literally thought of every aspect about this build!
@koreywilliams4570
@koreywilliams4570 3 года назад
I dont know who's more excited to see the finished build, exo or his fans.
@arthurenright4146
@arthurenright4146 3 года назад
Can't wait to see the Bass Van in some competitions! This thing is really coming together!
@handislappin
@handislappin 3 года назад
same here
@alexsilvester278
@alexsilvester278 3 года назад
That is a perfect analysis of how to shop for a tire. This is worth all the likes
@thatunknownguy2680
@thatunknownguy2680 3 года назад
You may have to add some fender flares to protect the paint now. My tired stick out past my fenders and now my truck it all chipped up from road debris. It's looking great, Bruce! 👍🏻
@danielmiller6983
@danielmiller6983 3 года назад
Those look great! Way more aggressive. Good choice, it’s coming along nicely
@Hardtimes4sure
@Hardtimes4sure 3 года назад
It's so nice to nice to see good people have good things happen to them. It was great to meet you at Bens stereo shop while you were getting the Helix. I hope to have the locksmith van playing soon. Keep up the great work and keep inspiring others to persue their passions like we do. Van is looking great and I look forward to seeing the progression. Have a great day brother
@danielrumey1412
@danielrumey1412 3 года назад
Exo remember to squeeze the wheel bolts when you have your vehicle down. When it is still suspended you can't make that much pressure.
@Alphahydro
@Alphahydro 3 года назад
First time feeling like I'm a part of a big build. Good stuff bro.
@benbraceletspurple9108
@benbraceletspurple9108 3 года назад
Cool it does really change the look with the wheels changed.
@petecastiglione9710
@petecastiglione9710 2 года назад
Looks great. Be careful with jack stands from Harbor Freight. They had a recall on some. Check to make sure you’re safe. Great video and can’t wait to see the final product of this build.
@cnclathe21
@cnclathe21 2 года назад
whatching only the jack holding the truck... i was terrified... now where the new home is ready i am just w8ing like crazy to see the complition of the build!! love from Greece!!
@FinnishArmy
@FinnishArmy 3 года назад
I used that G2 brake caliper paint just a couple days ago. It's really good stuff!
@janderson3703
@janderson3703 3 года назад
Grooved and slotted rotors are for heat displacement. Keeps them from overheating and glow red if your coming off a steep mountain
@bitrage.
@bitrage. 3 года назад
The method are BY FAR IN MAGNITUDE OF 10 better then the other ones.... The unsprung weight thing is true, but unless ur racing or giving it hell you will not cause more wear an tear...
@pyrolinn2088
@pyrolinn2088 3 года назад
Dont those centering rings go on the backside of the wheel?
@MaNNeRz91
@MaNNeRz91 3 года назад
Yeah it's a spigot ring and goes between the disc and the wheel or the Hub and the wheel if its got inbound brakes
@mhrepoman
@mhrepoman 3 года назад
I would look into doing some suspension upgraded. At the very minimum, I'd upgrade to bilstein shocks, and when you choose the shocks I would get the 5100, but if you get the 5125 series, you can get them in different valving. I'd get firmer valving. Then, I would get front and rear upgraded sway bars. Finally in the rear because of how much weight you have added in the structure, along with all of that wood, not to mention all of the weight you're going to add in audio equipment, I would get some rear leaf spring helpers. You could do airbags, but there is a system I'd recommend called the "roadmaster active suspension." It will help you carry the weight without riding like junk! Awesome build man! Very well thought out and executed!
@noodleeees
@noodleeees 3 года назад
If you want to chrome the lettering on those method letters, the best recommendation that I can think of would be using a Molotow Chrome marker, it is a quick and simple solution to silver chroming that looks great. Past that spritsing some Alclad II Lacquers Gloss Klear Kote ACL310 will seal it off for a long lasting shine.
@rollme1kenobi893
@rollme1kenobi893 3 года назад
The car audio world is lucky to have you🙏
@scottearls7340
@scottearls7340 3 года назад
Yes!!!!! Larger wheels cause more stress on your transmission. They make kits for transmissions that beef them up to handle large rims. 👍
@Oroborus710
@Oroborus710 3 года назад
I'm not too sure about painting the driveshaft, that's a pretty tuned-in balanced part of your drivetrain and even the smallest vibration WILL cause premature ware. Just my two cents :v:
@lowriderbug
@lowriderbug 3 года назад
It's great to see someone upgrading brakes on their build. Too many people don't realise just how inadequate stock brakes are when you start adding weight to a vehicle.
@gregkrueger331
@gregkrueger331 3 года назад
Man i just love how happy you are. I wish i had a 1/10th of your enthusiasm 👍
@MrDopey32
@MrDopey32 3 года назад
Beautiful match up with those rims and tires! She's looking real nice!
@SuperKanuuna
@SuperKanuuna 3 года назад
Hey Exo, car guy here! If you want all benefits out from your big brake kit, updgrade also if possible, your brake master cylinder setup for bigger one
@austinsears1637
@austinsears1637 3 года назад
That and also upgrade to stainless braided brake lines. All that with an upgraded master cylinder equals such much comfort and safety while behind the wheel, knowing that just if and when some yackass decides to pull out in front of you, that you're able to put the stop down n stop on a quarter hopefully hahaha I say quarter bcuz dimes are for formula 1 cars I suppose!? Hahaha idfk wtf hahaha but yeah n e ways broski good luck!!!
@MarkiedosOCHO
@MarkiedosOCHO 3 года назад
Wheels changed the look so much! Great choice!
@jamisonw.327
@jamisonw.327 3 года назад
Project farm did a video about rust protectants that recommended crc after a bunch of tests. That is all I would personally do with the drive shaft. It sprays on and forms a semi-hard gloss that reacts and soaks into the rust.
@busygiraffe7003
@busygiraffe7003 3 года назад
Great job once again EXO! The van is really coming along. I like the black on black with just a touch of silver look you have now. Love how the videos are so detailed and how transparent you are. You’re definitely ahead of the game now vs Dougie over at Soundman. Can’t wait to see more videos!💪🔥
@mikeruizxd5534
@mikeruizxd5534 3 года назад
Great van so far! BUT I highly RECOMMEND taking it to a wheel alignment shop or tire shop and have the speedometer corrected for the size tires and rims. They have a computer that they plug in the and they fix it to the new size. I put bigger rims on my Toyota RAV4 and I got pulled over on the interstate and got a ticket because they said I was going 5 miles over. I had completely forgot.
@mr.k6136
@mr.k6136 3 года назад
Beo you pump me up to go out and get back into my passion of car audio.
@IamtheLordofDoom
@IamtheLordofDoom Год назад
One way to get the hub center lettering in silver - paint the whole center silver, then when it sets, paint it black all over and when that has set then rub off the black paint back to the silver beneath. If there was a way to do a hard chrome finish that would be ideal. Just a thought, I'm no painting expert. But there's always a way!
@TheBeerBox80
@TheBeerBox80 3 года назад
I like the wheels you choose better than any of the other options. Nice looking tires too.
@sfv1001
@sfv1001 3 года назад
Hail yeah! my man sporting a US General. I roll that in my shop too!
@j3llymantv56
@j3llymantv56 3 года назад
Lookin good Exo, I want to say that you should properly break in your brakes, you can do that by getting up to about 45-50 mph than stepping on the brakes hard, not enough to lock them up but close. Do this 3 times with about 2 minutes between each time you step on the brakes. Also the other brakes that were behind the rotor is the emergency brake. Love the videos man, keep up the amazing work.
@gasoline7954
@gasoline7954 3 года назад
22:51 your laugh has officially been cursed.
@fxgamer-11yt
@fxgamer-11yt 3 года назад
Thank God I been waiting on an update on big behemoth she's looking good Bruce keep the work up buddy
@zachbaumann4508
@zachbaumann4508 3 года назад
Looks dope man! Do the center caps with an EXO logo!
@josecastaneda6495
@josecastaneda6495 3 года назад
I like how much thought you put into this build, well quite frankly all your builds. good job man keep it up
@bullitmaget8193
@bullitmaget8193 3 года назад
painted my calipers cadbury purple goes well with the pebble stone grey car colour
@Matty.Hill_87
@Matty.Hill_87 3 года назад
What colour wheels? Bet the grey and purple looks awesome
@oldkid2688
@oldkid2688 3 года назад
yes another amazing video
@mikeruizxd5534
@mikeruizxd5534 3 года назад
Keep up the Great work! Hope to see you at the shows!! 👍👍
@stephenthorne9522
@stephenthorne9522 3 года назад
It all comes down to the load rating of your side walls on the tire
@bigk7788
@bigk7788 3 года назад
Working in that tent has got to be warm... But I am spoiled my garage is air conditioned.
@MayhemVideosTX
@MayhemVideosTX 3 года назад
You should look at tuning options, would make the thing drive better and could probably get a little more power out of it . And you could have the speedometer corrected which will have the shift points back to normal also
@bobharveythercanddiyguy22
@bobharveythercanddiyguy22 3 года назад
Good for you EXO lookin good, Cant wait to see what's next!
@jasonhastings5538
@jasonhastings5538 3 года назад
That big ole van heavy!!! Id get some heavy duty jack stands!!
@xajejayy7701
@xajejayy7701 3 года назад
Man..... im so excited for that behemoth.this will be a beast😎
@psementalist
@psementalist 3 года назад
I'm so sorry for being late watching you new RU-vid video. I had to chose and pick out new wheels and tires for Praisenator after i had gotten back from SBN 2016 . Excellent choice for you and the van
@Gmpro02
@Gmpro02 3 года назад
just a safety tip, when using jack stands, you want to have them up against a flat surface, the backup stands you had in place would just end getting pushed over by the angle on the frame rail, and once a jack stand starts to tip over, there is almost no way to stop it, especially once the weight of vehicle shifts to follow the jack stand down
@74midwestbass74
@74midwestbass74 3 года назад
YES SIR!!! Im NEXT!!!
@lv9530
@lv9530 3 года назад
I remember a video explains weight on a vehicle and reducing weight that isn’t on suspension is something crazy like every pound of no suspended weight taken off it like 9 lbs of suspended weight. So yes a lighter tire does make a difference
@mhrepoman
@mhrepoman 3 года назад
More so than the weight that will be the added strain on your drive train is the tire diameter. But, if it becomes an issue then you can always re-gear the rear differential.
@MeatPoPsiclez
@MeatPoPsiclez 3 года назад
Speedo should be able to be calibrated by a friendly dealership, or via an aftermarket programmer, it's a minor change to the ecu. It's worthwhile to get it calibrated, not only does it fix the speedo, but corrects shift points in the transmission returning behaviour to stock. You're right that 4% isn't a big deal, but since you're going the extra mile to do everything 100% I can't see why you wouldn't.
@hectormateo3769
@hectormateo3769 3 года назад
The build looking good with new wheels and rubber 👍😎
@LeRoyNess
@LeRoyNess 3 года назад
Tip on painting drive shaft put it in low gear ease off the throttle let it spin take paint and start spraying
@troydefond2307
@troydefond2307 3 года назад
everytime I get on tube I'm hoping for a new video of the build, it makes my day.
@gtafails7355
@gtafails7355 3 года назад
I'm so ready for the grand finally and the Godley bass test
@kellypg
@kellypg 3 года назад
Those brakes are wild. I've never seen that before but I'm only in the car world so I guess that's why. The van is coming along awesome, man. Can't wait to see it finished. If I'm lucky maybe I'll hear it some day. Also, RU-vid is on their bs again. I'm subscribed and have all notifications on and didn't get an alert.
@MaNNeRz91
@MaNNeRz91 3 года назад
The brown on the handbrake shoes is either resin or antitrust coating
@Fostercfxlax
@Fostercfxlax 3 года назад
Stoked for you EXO!
@happystar1000
@happystar1000 3 года назад
Impressed with your level of technical knowledge, and trying to think of everything possible consideration. The build is coming along great! The cage imo, could have been done with angle iron though, so that you could mount larger pieces of wood on them, giving you easier access to work as well. and then you could have done further metal bracing after mounting the wood. But regardless, your plan is looking really well thought out and I love the results.
@Mr.Phesadent
@Mr.Phesadent 3 года назад
So pumped to see another van upload. Love the progress and your enthusiasm!
@bachnakjohn3180
@bachnakjohn3180 3 года назад
You did right with the wheels!
@adamtheninjasmith2985
@adamtheninjasmith2985 3 года назад
Nice dude. Those are some pretty sweet new shoes for the ride! It's actually pretty amazing that you got bigger wheels and tires and kept the same weight. BTW wheels and tires and anything else that isn't supported by the springs is unsprung weight. It CAN affect the suspension and even the ride.
@wadebuck69
@wadebuck69 3 года назад
You should clean brand new rotors with brake parts cleaner because they are lightly oiled so as not to get surface rust during shipping.
@trevordoeseverything219
@trevordoeseverything219 3 года назад
Akebono is the best when it comes to brakes, use them on my suv. Best break Buy ever.
@kevincobb5182
@kevincobb5182 3 года назад
You could have used high temp paint for headers ect from auto store! I did and it looks sweet and has lasted for months! It does not come off easy as i have pressure washed many times!!
@dannydanko4627
@dannydanko4627 3 года назад
Youre one of my oldest subscriptions on youtube, glad youre still doing your thing! Hell yeah, van looks great!
@mackie_p
@mackie_p 3 года назад
Video quality looks like it got an upgrade! either that or you're just looking guuud!
@flapjackwhat7831
@flapjackwhat7831 3 года назад
Use black stove polish on the driveshaft. If you paint it you could give it an imbalance, the polish is more like an ink.
@TheTransultimate
@TheTransultimate 3 года назад
Yeaaaaahhhhhh he is back againn. Letssgoooo EXOOOO!!!!!
@johnconnell1424
@johnconnell1424 3 года назад
Looking pretty awesome 😎 EXO!!!!
@JasonWW2000
@JasonWW2000 2 года назад
Just a note on safety. Those thin metal rings looked to be spacers due to the rims center bore being larger than stock. Those are not to center the rim. They are load bearing. The weight of the vehicle is transfered to the inner ring of the rim. If the rim bore is too large you will have all the weight transfered to the wheel studs. A little driving and a few potholes and the studs will shear off and you'll lose a wheel. I've seen it happen many times. You want the axle bore transferring the weight directly to the rim, not the lug nuts.
@eatagoat85
@eatagoat85 3 года назад
Loving that green shirt brother!
@herculesbrofister265
@herculesbrofister265 3 года назад
I have that same symbol tattooed on my forearm. It symbolizes our relationship with the illuminati. Jk
@majorwilkesjr.5827
@majorwilkesjr.5827 3 года назад
Bro , get the Vision's . You could always custom paint them however you want .
@robertgerlak1702
@robertgerlak1702 3 года назад
I %100 think that the weight of your tires matters. I went from 61lbs tires to 54lbs tires and having that less mass for the vehicle to have to rotate makes a huge difference. Not only in acceleration but braking too. I have very noticeably better braking now with lighter tires.
@Matty.Hill_87
@Matty.Hill_87 3 года назад
Rotating mass will make a huge difference
Далее
The Secret Life Of Gas Springs
24:32
Просмотров 626 тыс.
I forced EVERYONE to use Linux
22:59
Просмотров 346 тыс.
America Was Wrong About Leaded Gas - For 100 Years!
14:16
I CONFRONTED THE GOVERNMENT ABOUT CAR INSURANCE
28:14
Просмотров 701 тыс.
Wiring EXO's Subwoofer Box (LIVE)
1:57:05
Просмотров 52 тыс.