Тёмный
No video :(

BigTreeTech Manta M8P motherboard + CB1 Raspberry PI replacement board upgrade w/ Klipper firmware 

Aurora Tech
Подписаться 84 тыс.
Просмотров 34 тыс.
50% 1

Опубликовано:

 

23 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 110   
@MrGerhardGrobler
@MrGerhardGrobler Год назад
Step by step instructions anyone can follow. So many videos I have watched just did a timelapse of the edits done to make things work, result, total failure on my part to follow the instructions. Why did this happen? They Ass-u-me that who ever is watching is already a full fledge expert. You focus on clear an precise instructions. You have my admiration for your teams awesome work!
@halsonger1317
@halsonger1317 Год назад
Excellent how-to video for this product and process. It's a nice change from your reviews, which are always very informative, but understanding the nuts-and-bolts aspect of 3D printing is always helpful for me. I would suggest doing one about the various changes you might make in settings for Cura or other slicers and what effect they have on the printing job, e.g. tradeoffs on speed vs. quality, layer height impact on durability or looks, etc.
@luismasuko
@luismasuko 4 дня назад
That’s the most helpful video about this board. You re awesome
@HiGHrVOLTAGE
@HiGHrVOLTAGE Год назад
This is the absolute best tutorial video. Straight to the point, no fluff! Thank you!! Following
@ericjamieson8882
@ericjamieson8882 Год назад
Thanks again, you clued me into setting up the Manta M5P with dual Z for my LK5, and this is great practice for when I build a Voron 2.4 or what ever it is when I get to it.
@waynenewberry1032
@waynenewberry1032 Год назад
I was on the fence about upgrading my Makergear M2- now I'm REALLY on the fence- this was a lot of work, thanks for sharing.
@robertn1122
@robertn1122 Год назад
Great video, I hope you going to continue with upgrading this printer!👍👍👍👍 Alle the best 👍👍👍👍
5 месяцев назад
Nice job , you helped me figure some issues out on mine and I used the same thing as I have had the arts for a bit of time the only other thing I did was also changed it to Canbus with an EBB42 as I didn't like the large extruder cable. I did get the m8P to fit where the old one was with strong Velcro. Thanks for the video !! :)
@trogdor3288
@trogdor3288 Год назад
This channel is going to explode, keep up the grind. As always, very straight forward, informative video.
@vesalaasanen2158
@vesalaasanen2158 Год назад
You guys are the best! It would be really interesting to get your guide video of this printer or Two Trees SP-5 to make an optimized fast printing machine with reasonably priced upgrades.
@andrewwatts1997
@andrewwatts1997 Год назад
Yeah... I'l be buying this to replace the dead motherboard in my ender 3 v2. Great review!!
@avejst
@avejst Год назад
Great upgrade to the printer Thanks for sharing your expirences with All of us 👍😀
@sgt.sasquatch
@sgt.sasquatch Год назад
legend ....as always .😍😍😍😍😍😍😍😍😍😍🥰🥰
@dilipl8470
@dilipl8470 Год назад
Excellent video, well described and easy to understand. I was planning to update my printer with this board and had so many questions, most of them were answered here.
@michaellindborg1510
@michaellindborg1510 4 месяца назад
Great, easy to follow video. Copying pid and input shaper values from a file online is however not a great idea. You should run your own pid and IS tune.
@ryangamble5131
@ryangamble5131 Год назад
As always a fantastic video! CPAP blower, Hextrudort and Goliath combo when it comes out and you'll be pushing insane speed with good cooling 😀
@renugadevik183
@renugadevik183 7 месяцев назад
Thank you the video was really helpful
@sofubard
@sofubard Год назад
Great how-to video, very well orated and documented - well done and keep it up!!
@3D_Printing
@3D_Printing Год назад
Nice BIG 3D printer
@3D_Printing
@3D_Printing Год назад
Flying Bear Reborn 2 seen your other video. Thought it had two heads IDEX?
@3D_Printing
@3D_Printing Год назад
I think if I had the cash I would buy one, very small budget this end
@Reindeer-ry2lf
@Reindeer-ry2lf Год назад
Cool going through all the steps needed to do the upgrade. Thanks for the great information and effort 📶💪
@nickrudd2568
@nickrudd2568 Год назад
I brought a Manta M8P, its in the printer but ive not done the computer side of things, This video will help cause i havent got a clue. lol
@ДелайВсёСам
@ДелайВсёСам Год назад
Привет. Я тоже перевел Реборн 2 на клиппер. Это позволило печатать с большой скоростью. От 150 мм/ мин. Отличное видео! Спасибо!
@janpetersen8441
@janpetersen8441 Год назад
It is so nice to see a project video from you again. I have been missing them. This is a convection I'm considering for one of my printers as well. As always, your video is a very clear and detailed step by step guide. Awesome work team. Btw, iI wonder if the Voron Afterburner print head would be better fit for this printer?
@scottsum1319
@scottsum1319 Год назад
Super cool to see the whole process. That said, I wouldnt have the confidence to pull this off without personal hand holding. The speed makes it worth the effort tho. Good stuff
@WEHRWOLF9130
@WEHRWOLF9130 Год назад
Seeing your build and review sold me on this printer and the Tinker part of me already ordered the same upgrades. Do you have any follow up videos?
@expatmeeple
@expatmeeple Год назад
Very cool video 💪🏼💪🏼💪🏼
@themountain59
@themountain59 Год назад
See...that makes sense ...a budget coreyx printer with this upgrade for basically the same price then the dud you tested before .....nice video on this project!🤘
@jmwetterene7459
@jmwetterene7459 Год назад
Super vidéo merci j'ai testé la mp4 avec cb1 c'est magnifique
@GraemeRobinson
@GraemeRobinson Год назад
superb video - thanks for the hard work.
@GregTheNomad
@GregTheNomad Год назад
love it funny thing is i wanted tog et this printer for this exact reason
@corlissmedia2.0
@corlissmedia2.0 Год назад
Fantastic job!
@DennisMurphey
@DennisMurphey Год назад
You and your team are amazing. I am floored with the capability to hack successfully such a complex conversion. I hardly understood all of it and I an happy when my 10S Pro V1 sticks the first layer. But I could never attempt this. You guys take care and Thank You for sharing. Would we ever want to consider this upgrade for the 10S Pro. I liked the larger screen and heard the Klipper was faster from your Sonic video. Thanks Again such a dear. Dennis
@knuckles1089
@knuckles1089 Год назад
Hello, thank you so much for your video, it has been really helpful for me, I also have bought a Reborn v2 and followed your tutorial to install Klipper. Almost everything is working fine, except for the hot-bed which doesn't heat :c My printer.cfg file: [heater_bed] heater_pin: PB7 # "BED-OUT negative terminal" sensor_type: EPCOS 100K B57560G104F #sensor_type: ATC Semitec 104GT-2 sensor_pin: PA0 # THB pin #max_power: 0.6 # Adjust Max Power so your heater doesn't warp your bed control: pid pid_Kp: 325.10 pid_Ki: 63.35 pid_Kd: 417.10 min_temp: 0 max_temp: 120 Edit: I managed to solve this issue by connecting the BED_power terminals to the PSU_power terminals (24V), so that the PB7 PIN could trigger the relay to heat the 220V AC bed
@hashbringer975
@hashbringer975 9 месяцев назад
Hey. runnning in the same issue. did you run both wires (+ and - from PSU) to BED_POWER?
@knuckles1089
@knuckles1089 9 месяцев назад
@@hashbringer975 Yup, I've connected both BEDpower+ with PSU+ BEDpower- with PSU-
@g4egk
@g4egk Год назад
Thanks for the video, look forward to seeing a better cooling solution on this printer. Any plans to add ABL to the FB R2?
@Piccyman1
@Piccyman1 Год назад
I was thinking about fitting a n MP8 on my Svol sv04, could be fun
@RetiredRhetoricalWarhorse
@RetiredRhetoricalWarhorse Год назад
I am also trying to use an M8P on my Reborn 2 but I am yet again reminded that electronics is my weak spot. I bought a display too and only after the fact noticed that this display with a ribbon cable only seems to be working with an actual Raspberry Pi. So now I got a Raspberry Pi but that seems to be unable to boot off the SD card because it has MMC storage. So now I need to find a 24 V power supply to test this although I am led to believe I might be able to use a 12V one too but I cannot verify. I so wish that there were better resources online as in actual people willing to respond to questions. It used to be like that with forums, but these days you can either ask under videos like this in the hopes that somebody cares or go on Reddit and be ignored for the most part or if someone answers, they don't read the question or just tell you to do it their way because that's better anyway. O tempora, o mores. I seem to be entering the "get off my lawn" age...
@Shifter_Fitter
@Shifter_Fitter Год назад
Thank you .
@message2prateek
@message2prateek Год назад
Waiting for your review of Sovol SV06
@matteyles7466
@matteyles7466 11 месяцев назад
Your videos are awesome, may I ask do you need a pie adaptor to install the CB1 operating system?
@getHornbied
@getHornbied 4 месяца назад
Thank you for the video. I have a BTT Pi TFT50 V2.0 and was wondering if the install for the screen is the same?
@muhammadakmalfadilah3273
@muhammadakmalfadilah3273 3 месяца назад
can you do tutorial how to connect m8p with fly sht 36 pro with can bus
@jjkproduction
@jjkproduction Год назад
Great video again! I have similar setup and I cant get 24v on Bed-out connector. Is there some jumper somewhere or do you have route 24v power to bed power connection? I think that I will take that relay control signal somewhere else.
@edivaldoarantes5562
@edivaldoarantes5562 Год назад
Você poderia mostrar como fez as ligações dos cabos, ssr e outros ?
@andersonrincon3460
@andersonrincon3460 Год назад
I can with the m8p blanket resume a print if the power goes out
@johnlytle6633
@johnlytle6633 Год назад
I have converted my Anycubic Pro to Klipper using the PAD 7 and the stock mainboard. Thanks to your video, it was fairly easy. Would using the PAD 7 and a different mainboard, like the SKR 3 or Octopus, have made this easier?
@24KG24
@24KG24 Год назад
Part cooling on Reborn 2 is already bad at stock firmware. Not sure what they thougth when they designed it.
@kazolar
@kazolar Год назад
Great video. Wonder how the setup for the accelerometer would go with this board? Looks like there something similar to a 40 pin header on the Manta, so I would assume that it would work the same as with the PI. Also would be curious how canbus setup would work with this board. Is it USB only? or is it compatible with a waveshare board? From what I see there are 2 USB ports, but their documentation says 3, where is the 3rd?
@user-fq7yb2vq2r
@user-fq7yb2vq2r Год назад
Please do this for the flying bear ghost 6!!! There's nothing about that printer on klipper in English only Russian. Please Please 🙏
@samschultz6106
@samschultz6106 9 месяцев назад
Would you be able to upload your printer.cfg I am doing this same build and it would be extremely helpful to save me some time
@Piccyman1
@Piccyman1 9 месяцев назад
I noticed that your microsteps were set at 32 and not 16, how did you set this on the board?
@quarkpix
@quarkpix Год назад
Wondering any English group on the Reborn 2? Can't find much info
@byronkavanaugh1427
@byronkavanaugh1427 11 месяцев назад
This is an Amazing video, I am doing the same to The Flying Bear Reborn 2 at my job here at The Dinosaur Company, Im running into an ADC out of range, I may have to replace the heater sensor? did you run into the same issue? Thanks so much 😃
@byronkavanaugh1427
@byronkavanaugh1427 11 месяцев назад
I got it, Had the HB and TH wires swapped, fixed it in printer.cfg
@message2prateek
@message2prateek Год назад
Is there a way to add an additional stepper driver to an existing board? If not which will be your budget pic for a board that supports 5 stepper drivers?
@williangomesarruda2972
@williangomesarruda2972 Год назад
Hi, thanks for the video, did you was able to use an input shaper sensor in the board such the adxl345 or another one ? if yes how did you manage to do that in this board? my board doesn't boot with the sensor in the sp1.
@joshsmyth130
@joshsmyth130 Год назад
every time I start thinking about doing something with my printer, this channel either already has a video for it or one comes out in the next day or two. It's kinda creepy. Awesome, but creepy, lol.
@BarfusWOW
@BarfusWOW Год назад
I just bought one of these controllers for my crappy TRONXY corexy...
@randomgrenad346
@randomgrenad346 Год назад
Will you be reviewing the new P1P as well?
@AuroraTech
@AuroraTech Год назад
Yes, having it for a while and already using it. Works really well just like the X1 without the enclosure, but no time to review it yet, may post the video in Jan or Feb.
@south02m
@south02m Год назад
What do you do with all the printers you review?
@fiqabumm1
@fiqabumm1 Год назад
Hi maybe you will be able to help me. I am trying to order m8 with cb1. But on biqu it dosent mention if the board is v1 or v1.1(with canbus) and is CB1 v2.2 ?
@24KG24
@24KG24 Год назад
Any update on the cooling issue?
@edingcnc7685
@edingcnc7685 Год назад
Hi, i didn't see you programming the manta board firmware. isn't it required?
@skylumz8423
@skylumz8423 Год назад
I am wanting to design prototype parts quickly I have a basic ender 3 now with a few upgrades. It is painfully slow. Was wondering if it would be best to buy a core xy printer and installer klipper or just by the p1p... budget is 800$
@hashbringer975
@hashbringer975 9 месяцев назад
if privacy isn't that big of a deal, then get the Bamboo lab.
@rv7tt
@rv7tt Год назад
Great video, I too have had issues with the stock board and firmware. I'm think this the the best solution for the MKS issues. I'm saw an earlier post with a question, likewise I don't wish to be rude. If anyone could provide insight it would be appreciated.... The MKS board came with two types of stepper drivers TMC2225s for four axis motors, and one 2209 for the extruder. Did you reuse the stepper drivers in this installation or is there an advantage to using the two types?
@AuroraTech
@AuroraTech Год назад
I didn't reuse any of the drivers, I want to use that MKS board on other machine, but I should just connect a classic LCD screen and recompile Marlin firmware instead of using their buggy screen firmware.
@rv7tt
@rv7tt Год назад
@@AuroraTech Excellent thoughts, thanks again!
@aaronfoster5680
@aaronfoster5680 Год назад
I'm planning on doing this exact upgrade for my Reborn 2; is there any way you can share the STL you used for the screen holder?
@quarkpix
@quarkpix Год назад
Wondering if you can share any English user groups on the reborn2? Just kind of hard to find info in English
@la77y8
@la77y8 Год назад
@@quarkpix I'm trying to sharpen my Russian and Chinese, too...
@adamfilip
@adamfilip Год назад
did the heatsink fan die?
@f1hotrod527
@f1hotrod527 Год назад
I have an original CR-10 that prints very well. I will be doing some mods to it, (micro swiss all metal hot end, belted Z, fang cooling duct). I would like to get a second printer, and like you, I think the bed slinger design is flawed and would prefer a box frame, and core XY. My question to you is, what core XY printer would you recommend? The flying bear reborn looks very good mechanically. But I think this upgrade you have done makes it much better. So at a price of $560 plus the cost of this upgrade, would you consider this a top value for the money? I will be printing engineering materials, and materials with carbon fiber, my parts are mechanical in nature. Would I be better off saving for the Bamboo labs X1? The Bamboo P1P seems like a good value, but I don't believe that can do the carbon filaments. The bamboo X1 probably can print quicker, but I am not as concerned with all out print speed (I still want faster printing that typical bed slinger). The flying bear also seems like it is more upgradable and modifiable. You have also done reviews on other core XY printers. What would you recommend for $500 to $700 for a core XY printer capable of high temperature materials like nylon and PC, and carbon fiber filaments?
@AuroraTech
@AuroraTech Год назад
It's too many works to do with this flyingbear reborn 2 upgrade. If I need a good Corexy, I would just go for the BambuLab X1 carbon or even the P1P would be a much better option. For the P1P, you just need to change to a hardened steel nozzle to print PA-CF which is available for around $15.
@f1hotrod527
@f1hotrod527 Год назад
@@AuroraTech Reborn 2 is $375 right now. $390 with a flexible build plate and bed leveling probe. You can do these upgrades and still be under the bambu lab stuff.
@alteredworks
@alteredworks Год назад
I'm about to install this board and everything I've read says to pull the VUSB jumper before powering the board with 24V from the power supply or you'll fry the USB controller. Did you need to pull it? I ask because obviously you're using the USB for the screen.
@AuroraTech
@AuroraTech Год назад
The USB-C used to power the board is connected to a 5V 3A adapter.
@sanketss84
@sanketss84 Год назад
were there any wifi issues with the CB1 ?
@thepyromaniac78
@thepyromaniac78 Год назад
I installed this on my twotrees sp5 and I am unable to heat the bed. The temp reads correct but it never heats up. Checking with multimeter there is never power going to the bed out side of the connectors. Should there be?
@jjkproduction
@jjkproduction Год назад
I had same problem. I programmed different output to heat bed. I choose next nozzle heater output and programmed that to control that solid state relay. That works great and bed is now heating.
@carbide1968
@carbide1968 Год назад
so easy grandma can do it.
@kalliroth5984
@kalliroth5984 Год назад
HDMI Not Support????
@WEEDTHEHABIT
@WEEDTHEHABIT Год назад
tft35spi?
@jmwetterene7459
@jmwetterene7459 Год назад
bonsoir peux tu m'aider je veux installer une ip fixe pour la cb1 comment faire merci jm
@Eng.Rastkhadive
@Eng.Rastkhadive Год назад
Hi can you help me? I Bay this
@Jbobonline
@Jbobonline Год назад
Aurora the wise ❤. Will it be rude of me to ask a specific question about Klipper? I’ll ask and please free to ignore if you are too busy - I will not consider it as being rude. Here it is: When using klipper, in order to achieve fast print speed, do I simply slice the model with higher printing speeds? Or does klipper “do some magic” with my gcode?
@mr.spongylikeaboss4987
@mr.spongylikeaboss4987 Год назад
No, it doesn't do any "Magic".. you need to setup your speeds in your slicer. However, the rest of your printer needs to be able to sustain high speed printing. Especially the cooling fans and ducts. I can tell you that a stock Ender 3, is not a good candidate for high speed printing.
@Jbobonline
@Jbobonline Год назад
@@mr.spongylikeaboss4987 Thanks. And yet, I’m supposed to get “some” improvement, no?
@Shifter_Fitter
@Shifter_Fitter Год назад
@@mr.spongylikeaboss4987 With the Rails ,extra's,and the frame from 2 of them one could be made that would .Belts would be a issue .I dislike belts though .A drill press for the new holes.A few drill-out templates fo the types of frame printed before tearing apart the Enders. Sorry ,stream of a new plan . Thank you . Made me Re-Org. Sounds like a good Winter Plan...It's -16c here .just warmed up from -25 ...But my Truck will be frozen..Sorry ,drifted , Thanks for the new plan direction .
@MrGerhardGrobler
@MrGerhardGrobler Год назад
@@Jbobonline a stock ender should give about 20-30mm/s extra with no loss in quality. I got a 20mm/s upgrade just by replacing my stock motherboard with a new BTT motherboard
@oleurgast730
@oleurgast730 Год назад
Actually main advantage is "input shaping", as it compensates for ringing because of resonances. Depending of the printer you can get twice to four times speed and acceleration - if the printhead can keep up with flow and part cooling. So to say it simple: You can use max speed and acceleration your printer supports without klipper anyways - but with massivly improved prints as ringing is mostly gone. Faster with same quality. For higher flowrate the most simple upgrade is a bondtech cht nozzle. On stock printer it wouldn't help much on common 0.4 or 0.6 mm size, as you can not make use of higher flow due to ringing. With klipper a CHT is very useful. Still, going higher speeds you might to need better cooling if printing PLA.
@jzagaja
@jzagaja Год назад
Can I adopt Aurora?
@robotogamer7220
@robotogamer7220 Год назад
First 😅✌️
@edvandorobson
@edvandorobson Год назад
CB1 wifi BUG BUG BUG
@petereriksson4115
@petereriksson4115 Год назад
Bahh, just buy a Bambu Lab and print on without all this stone age BS.
@zorabixun
@zorabixun Год назад
I don't think it is a good idea to force the printer to print with so high speed 😁🤪 Remember how the 3D printers work !! They put layers of liquid plastic on top of each other, it's not like drawing lines with a pencil, these layers have to fit exactly on top of each other and connect very well to form a strong structure. 3D printing is not about speed, but about precision and durability of the printed material. I use the original Ender 5 Plus printer and the prints are beautiful, very smooth as velvet, and the durability is the best, comparable to layer welding. Maybe for mass production in a factory Klipper is good, but for work at home, family hobby, and project prints ... Marlin is perfect and gives beautiful results .... best regards.
@mr.spongylikeaboss4987
@mr.spongylikeaboss4987 Год назад
Wow.. you are so wrong.. on many levels. The high end printers all use Klipper now. She has had more 3D Printers than you ever will, and this girl has forgotten more about 3D Printers than you will ever know.
@oleurgast730
@oleurgast730 Год назад
Actually resonance compensation and preassure advance are the key components for more precision. So with klipper you can get higher speed on same quality or better quality on same speed. Actually you might have missed the part she simply copied resonance compensation of a pre-made profile for this printer; so resonance compensation is on. Not optimal way to do so (you should always measure the individual mashine) but already great results. There are of course limits in speed and acceleration the printer is capable of, and limits to flow and part cooling. But mostly you do not reach theese limits without klipper (or another input shaper). She also showed limits of the hotend due to flow and quick fix by incresing temperature. As the printed object did not realy part cooling (no overhangs) this works. But as a better solution, a Bondtech CHT-Nozzle would be a nicer solution - and also incresing cooling capacity.
@Brombay
@Brombay Год назад
I'm impressed. Great Information density. Very on point and interesting
@24KG24
@24KG24 Год назад
Any update on the part cooling issue?
@jjkproduction
@jjkproduction Год назад
I printed on thingiverse thing:5844058 air ducts and it help a lot. I can easily print benchy 250mm/s on 5k acceleration. These are way better than orginals.
@24KG24
@24KG24 Год назад
@@jjkproduction May I ask for the Speed Profile please?
@jjkproduction
@jjkproduction Год назад
I think that I used same profile than this Aurora Tech video on that monitor support print but I use that 5k accelaration.
Далее
Upgrade Your Fans With Klipper Firmware
9:22
Просмотров 33 тыс.
REFLEX CHALLENGE vs FOOTBALL MACHINE 🙈😱
00:24
Просмотров 2,6 млн
I will never talk about Z wobbling ever again !
10:53
Просмотров 462 тыс.