BINK Looper Tutorial - Scripted Looping

Подписаться 2,6 тыс.

Просмотров 59 тыс.

50% 1

🌍 Support me on Patreon and join my Discord server: / connorshafran
BINK Looper is a free Ableton plug-in used to facilitate advanced looping techniques. With this device, you can pre-program loop length, as well as the amount of time it waits before triggering the loop. Using neighboring effects channels and dummy clips, you can also use this technique to automate effect automation in real-time (and eliminate cross-channel bleed).
*CORRECTIONS & CLARIFICATION*
- I didn't mention it anywhere, but make sure your global quantization is set to 1 bar.
- The "Stop" function on Bink Looper is for stopping the clip directly after it's recorded. Toggling that on will keep the clip from playing back immediately.
- I didn't mention this in the video to save time, but I find that it's good practice to delete/move the source files of your Dummy Clips so that Ableton can't find them. Rather than playing a silent clip, it'll be playing the empty shell of a clip.
- In the last part of the video, I labeled one of the long dummy clips incorrectly. The clip on Audio 1 (EFX) should say "Open 8 - Mute 8 - Open Forever."
Download BINK LOOPER here: www.binkbeats.com/binklooper
I also recommend watching this video on BINKBEATS' setup:
• Binkbeats: Live Setup
Many thanks to Frank Wienk / Binkbeats
intro - 00:00
bink looper controls - 02:29
dummy clips - 04:18
order of operations - 05:23
getting started - 09:17
bleed / two-channel setup - 13:43
automating effects - 18:55
stopping and starting clips - 20:14
summary - 24:17

Видеоклипы

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 246

@connorshafran 3 года назад

Update: I'm very happy to see that this tutorial has been helpful for so many people, and I still believe it teaches many of the fundamental aspects of scripted looping; however, I'd like to point out that I no longer use Bink Looper in my live performances. I've switched over to a plug-in called ClyphX Pro that offers all the same features with a more convenient UX and workflow. It also allows for scripted quantization (with % accuracy and % swing) and real-time loop transposition (i.e. I can program in key-changes in the middle of my songs), two big features that I'd always wanted to have. For those of you looking for a free plug-in to try out, Bink Looper might be the way to go. For anyone wanting to perform scripted looping live on stage, I DO NOT RECOMMEND Bink Looper, as it is known to glitch from time to time. Even a 1% failure rate is not tolerable for live situations. If you're comfortable spending a bit on ClyphX Pro, I highly recommend the investment.

@miguelpulido1683 3 года назад

Will you do a video on ClyphX?

@connorshafran 3 года назад

@@miguelpulido1683 It's been on my to-do list for a while, but I haven't yet figured out how to present all the concepts in an efficient way.

@mathiasscheitzeneder1685 3 года назад

Hi Connor. Thanks for your great video. Could you make a video about Clyphx Pro - especially about clip quantization? How can you automatically quantize a clip right after recording without having to press anything?

@connorshafran 3 года назад

@@mathiasscheitzeneder1685 I use the "waits" function to delay the "clip qntz" command so that it happens within 1-2 beats from the moment the loop is finished recording. The qntz command must be sent to the clip after it's done recording, or it won't work.

@mathiasscheitzeneder1685 3 года назад

@@connorshafran perfect. Thanks. I try my best to do it myself. May I contact you again if I have another question? As Miguel already said, an overview video about Clyphx Pro from you would be extremely cool.

@thisisalantaylor 2 года назад

Great tutorial. no fuss or stress and lays out the fundamentals perfectly. Thanks for sharing.

@melodaddies8137 3 года назад

I don't know what is more impressive your video about the bink looper or your music. Thx for the Inspiration!

@patrickjones4250 4 года назад

BRILLIANT this is the best video I've seen on this process.

@StringBard 4 года назад

I searched for this functionality for weeks. Thank you so much

@KyleHarrismusic 3 года назад

This was a fantastic tutorial. Thanks for putting the time and energy into making this. I use ableton to automate my arrangements with sensory percussion, think I could definitely use looping as a more consistent component of my songs!

@ryanweaver3910 4 года назад

I've only just watched the intro and I had to stop to say thank you!!!!!!!! Back to the vid, now.

@krismadaus4305 4 года назад

Such a helpful video. I was so excited when I saw BINK Looper last year, but I couldn't get it to work for me. I think your explanation will get me there. Thank you!

@kittensinkmusic 4 года назад

fantastic video! and "practice" is exactly correct. i used the bink looper (and clyphXpro) in my 2019 set but had to figure most of it out on my own because i didn't have the benefit of this thorough tutorial. great job!

@sinatrabone 3 года назад

You're a gentleman and a scholar! And I actually mean those complements -- this is very helpful, and it's so kind of you to share it for free. I'm still early in my live looping journey, but as I continue to dive deeper, I'll take some private lessons from you.

@danpottage7717 3 года назад

It's incredible that the bink looper is free, but this tutorial is sweet as hell. You and bink are making my dreams come true, man. Thanks!!!

@dantehu3594 3 года назад

From the first day I saw Binkbeats, I knew that's something I would love to try. Thank you so much for putting up the work.

@iszlu 2 года назад

I’m so happy you made this video. I’ve been searching for this kinda thing for years!!!

@PhillWard 4 года назад

Thankyou for this, brother - just what I needed. Fills in all the gaps in what's currently available from Ableton and Binkbeats :-)

@TaylorMcDonaldMusic Год назад

Thank you so much for these videos! Such incredible knowledge and experience poured out here. I cant believe you only have 2k subs. I hope to see that grow.

@ShortP1089 Год назад

Mate this video was eye opening. Thank you so much, you have no idea how much you just impacted my thought process of how i want to go live with my music.

@davidhallowell3457 Год назад

Incredibly well organized and effective teaching. The Bink Looper is daunting, but simple enough when explained the you’ve laid it out. This is exactly what I want to do…so thank you very much for the inspiration! I’ll subscribe and watch your work. Maybe I’ll come back for some private learning…let’s see. Cheers.

@mcg42387 3 года назад

dude, like everything you have posted, it is so crisp and well put together. i just want to say thank you for your work and for sharing it. this has insipred me to really rethink a lot of things and i am going to have some great fun re imagining the live process

@connorshafran 3 года назад

cole gillespie I’m very happy to be able to help. :)

@lyosun9876 3 года назад

Dude... you're a legend. I can't even imagine the amount of time you spent learning this technique. This is great help. Thank you !

@connorshafran 3 года назад

I have more gray hairs than when I started, that's for sure.

@Gregorydavidmusic 4 года назад

Man, thank you so much for this tutorial, have been looking for a comprehensive tutorial on Bink Looper for about a week! 🤙

@connorshafran 4 года назад

i'm really glad to be able to help! i've had so many people tell me that they couldn't find a tutorial, so it just seemed right to make this :)

@user-bp6tn7ys8x 4 года назад

Thank you for a such detailed tutorial!! It’s just awesome!

@MalacaMusicLab 4 года назад

This is brutal! thank you so much for making this!

@AndrewEldridge 4 года назад

Extremely well done, Connor. You have created a great resource for everyone that I wish I had when first starting with Frank’s plugin.

@connorshafran 4 года назад

thanks! yes i definitely wish i'd had a tutorial as well. i spent so much time going frame by frame through that binkbeats/ableton video, trying to figure out how to route everything. hopefully this will save people some time!

@AndrewEldridge 4 года назад

connor shafran I remember doing the same. At least 1,000 views from that tutorial have to be mine.

@StuartwasDrinkell Год назад

this has smashed my head right in but i want to know it - brilliant tuition my friend... love your stuff too!

@AlishaTodd 3 года назад

Wow! This is incredible, so clearly explained. Thank you so so much!

@nachobilbao3975 4 года назад

Thank you so much, perfectly explained, detailed, sequenced... just perfect! :)

@pepepeeppepepepeppep 3 года назад

FANTASTIC tutorial. Thank you!

@abelromijnibus Год назад

amazing tutorial, thanks so much for taking the time to explain all this!

@guitarbeats8926 4 года назад

Thanks for the thorough indtructions. I had to figure it out by looking at stills of the video, s by Frank himself. Great job!

@martindelzotto5841 3 года назад

congragts! incredible tutorial. i will start with this technique., some month from now i hope showing my progress. Thanks and Regards From Argentina.

@cislunarofficial6015 4 года назад

I must thank you man. Never thought that something like this cloud be done. You should do a screen recording video on Ableton while you playing your stuff!

@JoshPearson 4 года назад

Awesome video! Super helpful. Connor, you rule! Thank you!

@harsha_sree_t 4 года назад

Thanks for sharing! Fantastic video and great attitude.

@SkyFawkesOfficial 11 месяцев назад

Yoooo came back to say I just dropped my first Live Looping performance video and it was largely due to this video! Thank you for such a detailed tutorial

@holamellamoboza 2 года назад

Thanks so much for this tutorial, so smooth and easy to understand basic concepts around this great plugin. I'm working on my own template and i think color is a big thing when it comes to organize things visually... but i noticed two things: 1- When the monitor is set to "In" on a track, the clips won't show any color but grey. 2- If you follow this advice Connor is giving in the description box: "I didn't mention this in the video to save time, but I find that it's good practice to delete/move the source files of your Dummy Clips so that Ableton can't find them. Rather than playing a silent clip, it'll be playing the empty shell of a clip. " you don't get any clip color neither. In this particular scenario, what i found to be an alternative is to record a silent line and set the clip gain to -inf. Just in case someone is going crazy trying to find out what happens with clip colours.

@hansjckerkhoff 7 месяцев назад

Great. Straight to the point. Thanks.

@alexanderlipan948 8 месяцев назад

Thank you so much!!! This is exactly what I was looking for!! ❤🙏🤘

@felipebonilla7679 7 месяцев назад

Huge thank you! Greetings from Bogotá, Colombia.

@Shikijaku 3 года назад

20:14 this is so precious. i found it extremely hard to tackle this problem. loved the video and the age of mythology music you're making as well ahaha

@thiagokanan 4 года назад

Thanks for the video, quite a complicated process but will give it a go... !

@AndreaFilippoLongo 4 года назад

Thanks, that made some things clearer. Cheers!

@theorncampbell4432 3 года назад

BINK+Dummy Clips+Randomiser+envelope assignments+Effects rack = WOW!

@dostarczanty 3 года назад

You're an Angel man, thanks a lot and Sending Best to you and all yours!

@judaspriestzou 4 года назад

This is so helpful. Thank you sir!

@sardellosound 4 года назад

Thank you so much! This is the exact tutorial I needed. Bink’s explanation on Ableton’s channel is a little hard to follow at times. I would love to talk handpan with you as well!!

@connorshafran 4 года назад

Glad it helped! Hit me up on instagram messages, I'm always down to talk handpans (and DCI/WGI).

@dkijc 2 года назад

This has been soooo helpful. Thank you!

@ethanmiska6975 4 года назад

Great video. Very granular!

@somdesobra 4 года назад

Que maravilha!!! This is Wonderfull!! Thanks.

@bboygurhan 3 года назад

Connor you the man Thanks bro Thats really cool honestly

@Josephshanks7 4 года назад

Thanks a ton this was perfect

@DandelionLakewood Год назад

Amazing! This is great.

@morizanova 10 месяцев назад

Thanks for making this video

@felixraphael268 Год назад

Buddy! Thanks so much. Gamechanger!

@Bearfootinboots 4 года назад

Thank you! I just got ableton 10 standard and have been making the transition from looping with a pedal to looping with software... reason I made the switch is because I wanted to be able to do more and create living compositions as opposed to being limited to one time structure. I was trying to figure out how to delay recording and bring things in and out and was having trouble... thanks to this video I think I’m going to get the bink looper plug in and invest my time learning this technique... steep learning curve but it will be worth it. Cheers!

@coffeetoaststudios6576 4 года назад

Hi! can u explain how u add bink looper to ur Ableton 10 standard? when I drag it on a time line there is an Information "this device is not avible in this version of Live" did you have a problem with that?

@AykutBilir 4 года назад

@@coffeetoaststudios6576 I've got no problem while installing for Live 10. Anyway it should ask you to optimize itself for newer version and you should simply click yes. Hope it helps.

@user-bp6tn7ys8x 4 года назад

@@coffeetoaststudios6576 As I understand Binklooper is a Max for Live device, so It will not work with Ableton Standard

@RachelKCollierRKC 4 года назад

WOW Connor NICE ONE DUDE xxxxxxx

@jordanphilippe1438 3 года назад

Wouah, thanks for this great tutorial !

@Fexart 2 месяца назад

Dude this is genius! thanks!

@alexismartin7302 6 месяцев назад

Great tutorial thanks

@troydean7454 3 года назад

I love you Connor Shafran - thank you.

@theboytheycalljonny1 3 года назад

Lovely. Thank you!

@francesco5061 Год назад

thank you so much!

@0101119976 4 года назад

this is very interesting ...thank you genius

@vagoguy 4 года назад

great tutorial

@cleciorimas 4 года назад

Amazing!

@warminstrel2284 Год назад

Awesome, been using Live since start but only dabbled in looping as all the toe tapping and button pushing made the whole thing too much... this leaves you to just play. Insane... Edit: All started well and worked as described though i've noticed the metronome start to miss ebats after about 24 bars... causes an 8 bar loop to record as a 7 bar loop!

@JeffreySaxophoneTallNewton 2 года назад

I'm a Jazz musician and am trying out Abelton for looping long form songs (e.g., Jazz standards, 32 bars). I have Abelton Lite and "Looper" is only on the full version, so I got that trial. I have the Akai APC4oMkii control surface. Without using Looper, it is virtually impossible to make the parts play together, i.e., to have the high hat actually on 2 and four... Sure, I can post record input the bars beats 16ths to be the same, but that's pretty "out there" for looping. Since I'm using MIDI instruments for keys, I figured Abelton might be the way to go. Just got full version and Looper last night. Stumbled across this Bink plug in. Ideally, I'd just play (NO metronome or quantization; I have great time and have been playing Jazz for decades), and then record the next part without setting in advance the number of bars, but it just doesn't seem possible with Abelton. There is always a delay before it starts to record, no matter what I do. Does one use Bink INSTEAD of Abelton's Looper? I don't need the full Ableton (nearly $400 USD) except for the looper). Would this Bink or the ClyphX Pro solve these problems? Thank you very much!

Год назад

Great tutorial Connor, thank you very much. Quite relevant topic and very carefully explained. Congratulations! Could we say that the whole point of this video is to automate almost everything instead of mapping MIDI notes and pressing many buttons in a live performance? I am a kind of newcomer to Ableton Live, so it seems that there is a monumental effort to programming every automation for a whole live performance…but it may worth it, right?

@zpurpz 3 года назад

Interesting stuff

@dmob549 4 года назад

Subscribed! Thanks, this vid was much appreciated after trying to understand Bink's naming convention for my personal use, you helped clear up and answer a lot. My understanding is to use this as a template after creation for use of composing other recordings. It would be great if you had a template for us to download.

@connorshafran 4 года назад

following along with this video should set people up with a good starter-template. if i offer a pre-made template, it discourages them from learning by trial and error, which i believe is essential for mastering this technique.

@dmob549 4 года назад

@@connorshafran not exactly, as they probably won't use your exact set up, just used as a place to start. It would prob even keep questions from going unanswered as most youtubers don't have time to answer every comment.

@user-bp6tn7ys8x 4 года назад

It would be great if you show how you arranging one of your compositions, at least a small part)) like, if you prepare some “song scheme” before put everything in ableton and positioning clips etc. Again! Awesome work!

@connorshafran 4 года назад

This tutorial is coming soon!

@mikeamada3611 4 года назад

THANK U SO MUCH

@ellococaseros 4 года назад

Gracias!!!

@jafalamusic 3 года назад

Hi Connor (or anyone else who has helpful feedback!), this is great! I've been trying to recreate your workflow here with Clyphx Pro, and haven't always been successful in Session view; I am, however, able to make everything happen with X-cues in Arrangement view. Is that the best way to approach the "Binkbeats" flow w/Clyphx Pro? I'd rather work in Session view, as it makes more sense to me with multiple songs, but I'll keep plugging away with Arrangement view if you think that's best. Thanks again!

@mathiasscheitzeneder1685 3 года назад

Thank you for your video. One question. Is it possible to automate the quantization of the clip directly after the recording of the loop or do I have to make another dummy clip for that in a new scene? Thank you for your answer!

@curtiskelley1318 4 года назад

Hey Connor! Great video man - thanks so much for making this! Wondering if you ever record multiple sound sources at the same time via BINK Looper? for example, live drums. I'm running into an issue where the scene selector automation doesn't seem to reading when recording 5 mics on a kit.

@connorshafran 4 года назад

I do record lots of channels simultaneously. I would need more info from you to know how to fix the issue.

@JoHouse533 Год назад

Love the guitar you are using in the beginning, would you mind sharing which brand it is? HSS offsets are not easy to come by...

@Light1SiderPCMusic 2 года назад

Where was this video, when I start looping five years ago... But ALK2 looks better... To sad it's dead. Anyway, many thanks for this video! Good luck in your creations!

@vanharte4445 3 года назад

Hi Connor, thanks for the upload! Just sent you a message via your website. Thanks heaps.

@kamilchosta5526 3 года назад

That's cool! Does blink looper work with Ableton Live 10 Standard or do I need Suite?

@HarmonyWithHunter 3 года назад

ah. well, this starts to answer my previous comment's question. gonna have to delve into this now, looks like...

@connorshafran 3 года назад

Bink Looper is one way to do this for free. If a small price tag doesn't scare you off, look into ClyphX Pro as another option.

@hansjckerkhoff 7 месяцев назад

As said: Great vid. Good explanation. Only one question. Every former track is still armed after arming the next track. As long as you're using different midi instruments for input, this doesn't matter. But if you want all the input from the same midi device it's becoming a little messy. Changing the prefs doesn't affect this. Any idea to solve it?

@danieleors4938 2 года назад

hey Connor, your tutorial is fantastic, thanks for that! I have AL11 Standard, do you confirm I ll need the Suite version to run Bink Looper? I get the "This device is currently not available in this version of Live", so do you confirm I need to upgrade? thanks so much in advance

@l.ongman 4 года назад

thank you for the great tutorial! Have you encountered any latency issues when the structure and the effect chain are growing?

@connorshafran 4 года назад

Hey Longman no, but i do try to use as few plug-ins as possible (which can spark creativity), and stick to the standard ableton & m4l devices to keep the cpu stress low. i also use a very fast thunderbolt interface to get my round-trip down to 5.8ms / 128 samples (on my old 2013 macbook).

@333stoner333 3 года назад

Hi Connor, Great video - very clear and detailed tutorial! I'm finding that my audio channels are being very temperamental when I trigger the loop using the dummy clips - only about half the time do they actually activate the loop, whereas my MIDI track loops work fine. Do you have any ideas as to why this is happening? It's very frustrating, particularly when I get halfway through my song! Thanks again for the great content!

@connorshafran 3 года назад

Hard to know without looking through the set in detail. I recommend starting with a very small project and seeing if you can design it "bug-free" before moving onto full songs and live sets. Hope that helps.

@troydean7454 3 года назад

This is truly awesome thankyou. How do you automate changing scenes?

@connorshafran 3 года назад

In most of the videos I have online, I trigger the scenes manually by pressing a button. Recently, I've switched over to using ClyphX Pro, and I trigger the scenes automatically with locators in arrangement view.

@GosseScherstra Год назад

Great tutorial! I have a question. I can only select the first eight scenes with the scene selector (in the automation control). Is that normal? Thnx!

@0101119976 4 года назад

i just watched the video and i am very happy and thankful for you i just feel something is missing i have live 10 and i dont know why on the efx channel the clip is not the same as in your video . it has a grey color even when i change the color and when i copy it ,it is pasted without the automation, it looks as if it is not activated like in your video what am i doing wrong...i followed every step and dont bother if u get instagram msg too hehehe

@samsmith6521 4 года назад

Thank you so much for taking the time to share all this hard-won information.. Just a quick question... What are you using to trigger and move thru scenes while you are playing? All the best..

@connorshafran 4 года назад

i've experimented with different techniques. in my last video, i launched the scenes using the push 2 controller, but it only works well if there aren't many scenes. i generally prefer to map the scene-launch button to a physical button somewhere, like a midi controller (with it set to automatically move to the next scene after launching).

@samsmith6521 4 года назад

connor shafran Thanks Connor.. And congratulations on the beautiful production that is Attention Compression.. A great tune and a beautiful looking video..

@SamVerleN 4 года назад

Thanks for your tutorial, I personnaly use clyph x to do same things but with scripts (to avoid recreating dummy clips doing always the same actions). Very interesting approach too for the effects management, I think I will use it in the future. How do you manage your drum recording sound card latency ? With the quantization after recording ?

@connorshafran 4 года назад

The latency issue was a huge problem until I got myself a Presonus Quantum interface. Even on my clunky old computer, I get 5ms round trip at 128 samples. That's still barely enough to feel a tiny, tiny bit of latency when I'm playing hand percussion, but I've learned to play around it.

@SamVerleN 4 года назад

@@connorshafran Thanks for the information, I did not know this interface, my focusrite has a bigger latency because of the DSP processing. I think I will try to make the exchange :). I guess you also have chosen your processing plugins for their latency. I would be really interested to discuss more about it with you if possible. Here are some first experimentations I did with my set-up : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HreMZjnLyfQ.html

@rattamahattab9154 Год назад

This is a very nice Tutorial. I just wonder if there is a good way of using the Session view for a complete Live-set or if this gets too messy. I like the Arrangement view a lot for live backing tracks and by looping I want to reduce these backing tracks. But completely changing to Session view I cannot imagine yet, maybe just because of my limited Ableton experience..

@connorshafran Год назад

These days, I mostly use ClyphX and a combination of arrangement view and session view.

@TaiWyban 3 года назад

I haven’t reached the end of the vid yet but it seems like this is all stuff you can do in ableton with the built in “looper” and automating the “state” in arrangement view. Right? Am I missing something?

@somdesobra 4 года назад

Hi, I'm seeing it again and again! About the mute utility, were we able to put 01 (one) mute in a rack for all the tracks? turning on and off with the rack chain?

@connorshafran 4 года назад

Felipe Fiúza - Som de Sobra if i’m understanding correctly, you want to use a dummy clip to automate the mutes on every track simultaneously. to do this, i use a “pre-master” channel. all of my efx-channels flow into busses, which flow into the “pre-master” bus. i use long dummy clips on these busses & pre-master to do group/master muting.

@cleciorimas 4 года назад

Thousand thanks for this video! I remember asking for it! I'm getting ready to record my first session. Still organizing ideas. Do you suggest anything else? 1) Choose instruments, input channels, define the composition. 2) Organize the order of operations. 3) Practice / record a preliminary session to pre-mix and define automations. 4) Record!

@connorshafran 4 года назад

Clécio Rimas sounds good. you’ll hammer out the workflow the more you do it. i recommend starting with unimportant compositions (that won’t break your heart if done poorly). work out all the major kinks before moving on to serious projects. good luck!

@cleciorimas 4 года назад

Thanks Bro! An ally to me is Clyphx scripts. It help me in the order of operations ... allows hands free. The focus now issue is to improve performance by playing the instruments. This, as you say, bring improvement in the workflow

@cleciorimas 4 года назад

my video ... some small mistakes, but happy with the first experience =D I used the utility in the instrument channel (in the fx channels the signal was not completely muted) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-paB9KMBkhk8.html

@axel_fagerberg 4 года назад

I learnt a lot from this video! Thank you. I'm struggling with this one thing though. I want to play on a channel and keep playing while I activate the dummy clip that starts the recording. But, as soon as I activate the dummy, I get no audio through the channel, even though it's armed. What am I doing wrong? Thank you in advance!

@connorshafran 4 года назад

When you play the dummy clip on your source channel, it will cut off the audio flowing through that channel. That's just how Ableton works, unfortunately. Ideally, you can just launch the dummy clip earlier (before you start playing) and add a delay to the loop. If that's not possible for some reason (if you're using Bink Looper while improvising), I would use two duplicate channels- one for allowing the audio to pass through uninterrupted, and the second one to record the loop (while muted). Once the loop is recorded, toggle off the mute on the second channel to hear it play back.

@GrantEllman 3 года назад

Hi Connor. Thanks for this very valuable tutorial. Do you prefer this method or ClyphX Pro for scripted looping, and why?

@GrantEllman 3 года назад

Nevermind! I see your pinned comment now saying that you've switched to ClyphX Pro. Thanks :)

@dwii.oficial Год назад

Hi Connor, could yoiu please help me with Bink? I setup my first midi track and when It goes to the second one ( both MIDI ) start to play both instrument ( keyboard + bass ) at the same time. I tried to Setup arm on and off but no success, after start record the first Dummy clip the arm didn't goes off. what you think is the best idea here to ARM one by one in the exactly moment ? Thanks for the attention!

@DanSonenberg 4 года назад

Great video. I am struggling a bit though. It works fine without a delay, but for some reason when I add the delay the clip won't launch. I know I have it positioned correctly (between arm and loop length). When I set the delay, everything looks good. But then after I try to run it (and it doesn't work), the red circle by "launch" is no longer red, but a hollow circle. What could I be missing?

@wiktorchojnacki9746 2 года назад

Hi, did you manage to figure it out? I'm having the same problem

@wiktorchojnacki9746 2 года назад

Ok I think I got it, looks like your issue might be the same. Make sure the short dummy clips aren't set to "looping", which they are by default.

@tomahzo Год назад

Very nice tutorial! One thing that would have been helpful in knowing, though, is that not only does the clip quantization have to be turned off (like you said at 11:18) but the global quantization needs to actually be set to something reasonably coarse, like 1 bar or at least 1/4. I had it set to 1/16 and that caused the recorded notes (I'm using the midi version of bink looper) to be offset by 1/8T into the produced clip. Very strange. Probably because the clip recording automation does not have time to trigger the new clip recording in time to catch the incoming midi notes with such fine quantization. If the clip starts recording X time too late then all the notes are offset by X in the resulting clip. I'm running Live 11 so maybe that affects things too. Thanks again!

@connorshafran Год назад

Yeah, I forgot to mention that. I put it in the video description but it's not so obvious.

@InfiniteCosmicSleep 5 месяцев назад

I have a problem with the delay function. If i have the delay turned on(and in the right position in the dummy clip)The binklooper won't let me record using the dummy clip unless i start the clip at the exact same time session view(e.g. Pressing space to start with the clip pre selected) If i do not do this and press the dummy clip mid performance, the clip never starts recording at all.