Good video...I was really wanting you to go thru the reconditioner. I am about ready to try...It is the only thing i have not used yet so i will let you know.
What do you do if none of the buttons on the box work? There's no error codes or signs on the screen. I've tried 4 different batteries. It at least turned on for around 5-10 secs but now it won't do anything.
This means your battery is fully charged and the charger will only charge to keep the voltage up. The (FLO) Float mode is where the voltage on the battery is maintained at approximately 2.25 volts per cell, or 13.5 volts for a 12V battery.
Before trashing this unit if it doesn't charge a very low voltage battery try three or four cycles of the engine start routine without trying to start the engine waiting 5 to 10 minutes between each cycle eventually the voltage may come up. That particular cycle does not since the current level of the battery it just pumps maximum charge into it for a minute. Anyhow it worked for me three Three cycles and I was able to just start charging my dead battery
@@jamesbusse1543 that was smart! Giving it full power a few times would help it bring up the charge on that dead battery! Great idea to run it a few times until it had enough charge to do a regular charging. Thank you for the tip!
ON THE OTHER BATTERY CHARGE, IT WILL CHARGE ANY DEAD,DEAD,DEAD BATTERY. THIS MODEL IS NOT CONVIENT FOR CONSUMER. IMAGINE YOU BROUGHTTHIS MODEL AND START YOUR CAR IN AN EMERGENCY
