Black Walnut Epoxy Inlay Charcuterie Boards

Подписаться 16 тыс.

Просмотров 34 тыс.

50% 1

We made some epoxy inlay charcuterie boards out of black walnut! This is a fun and easy project that would make a great gift! Let me know what else you'd like to see in the future!
Enjoy!
EQUIPMENT:
Westcott Ruler: amzn.to/3qXVEvm
Machine Square: amzn.to/3e0b7WB
Mini GluBot: amzn.to/3k2Ac7c
10" Makita Chop Saw (the small one): amzn.to/3qyfJqY
10" Compound Miter Saw (the big one): amzn.to/2ZgI8Gf
Clearmount Miter Saw Station: framingsupplies-shop.com/clea...
Table Saw: amzn.to/3mkTVwV
Wood Glue: amzn.to/2HlA4OU
Clamps: amzn.to/2KRWZTC
Sander: amzn.to/3lY5tG0
Yeti Mic: amzn.to/3jSJEXu
Camera: amzn.to/2Gxp2W9
LINKS:
Everything we have to offer:
www.sammacydesigns.com
Check out Starbond Products here: www.starbond.com/?
rfsn=5517429.dfd513
- - Enter SAM10 for 10% off site wide! - -
Mike Farrington's Double Taper sanding disc:
www.mikefarrington.com/dt-dis...
Black Tail Studio's edge beveling technique:
• No Router Edge Profile...
Never miss a post! Sign up for our newsletter:
view.flodesk.com/pages/5f6235...
SOCIAL:
sammacydesigns
ali_macy123
sammacydesigns
sammacydesigns.com/lifeoutsidetheshop
All MUSIC
epidemicsound.com

Хобби

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@chrisydawn Год назад

I am jealous of your shop, very ,very nice.

@SamMacyDesigns Год назад

Thank you very much! Took me about 5 years to save up and put it together

@MrAngrytom Год назад

I have been hobby CNCing for about a year and a half. That card board cutout to set your zero is brillant. I will need to remember this.

@SamMacyDesigns Год назад

Thanks! Glad it was helpful for you! Happy CNCing 😃

@brentncindy9023 2 месяца назад

@@SamMacyDesigns Just ordered a CNC so ZERO experience here ....and glad I saw this comment because I saw the cardboard, and couldn't figure out WHY you did that. Can you explain?? (I DO know why setting zero is important. Just couldn't figure out why you'd do it on the cardboard and not the work piece). Thanks

@joshuabray37 Год назад

Those look great! Thanks for sharing.

@SamMacyDesigns Год назад

Thanks for watching!

@montewoods4766 2 года назад

Nice work my brother!

@SamMacyDesigns 2 года назад

Thank you! Cheers!

@zacharyshaver4325 4 месяца назад

Your shop is awesome

@SamMacyDesigns 4 месяца назад

Thank you! I'll be doing a shop tour in the next few weeks so keep your eyes peeled for that 😀

@chrisj9008 Год назад

Great vid. Well produced. And love my track saw.. I need a short track though.....liked your cardboard reference trick for the cnc.

@SamMacyDesigns Год назад

Thanks 👍 The short track for the track saw is super handy, great for crosscutting boards

@robertdunham8677 Год назад

Just what I wanted to see. Thanks for sharing!

@SamMacyDesigns Год назад

Glad you enjoyed!! Cheers!

@robertjohn527 Месяц назад

I was amazed to see you used oil based polyurethane to seal the wood around the pour. Does that work well for you? I’ve seen many videos where woodworkers will use the actual epoxy as the sealer. Have you tried that method?

@TWC6724 2 года назад

The boards look great. A small propane (or butane) torch or even a heat gun carefully waved over the epoxy will get the bubbles out. What CNC is that?

@SamMacyDesigns 2 года назад

Thank you and great tip! I'll try that next time. The CNC I have is a I2R8 and I think it's the same as the Axiom 8. I got it a few years ago and I'm super happy with it! Seems like it's a "pro-sumer" machine

@chadcarter2026 Год назад

Nice job on the video. Did you settle on a better epoxy for these inlays? You mentioned looking for something with a longer cure time to reduce bubbles.

@SamMacyDesigns Год назад

Thank you! And yes I did, I found a slow cure epoxy from total boat that cures up to 3" thick which means it take a longggg time to cure. It worked great, no bubbles and I added about double the amount of pigment to the mix

@doug9121 11 месяцев назад

Hey Sam, great video. Question first time seeing the sander used to take off epoxy instead of cnc machine. What sandpaper are you using and is that because it was a light epoxy pour. Thanks again.

@SamMacyDesigns 11 месяцев назад

I used 150 grit up to 320 but I think if I had to do it again I would heat it up with a torch and scrape it off with a razor and then hit it with 320! The sand paper clogged pretty bad….it became a bit gooey so in hindsight I don’t know that I would recommend taking the bulk of it off with sand paper 😂

@lloydbannister8062 Год назад

That turned out awsome dude what was that that you put in the Resin

@SamMacyDesigns Год назад

Thank you! It's a mica powder that you color resin with, this one is the color "pearl" . I think i originally just typed in "white mica powder" on amazon and found it. If I had to do it again I would add a bunch more to make it less transparent!

@Pintosonic Год назад

Tabletop epoxy are usually formulated for a deep pour. So when you use this type of epoxy for a shallow pour, it either takes a much longer time to cure or remains tacky unless you apply external heat. What you need is a low viscosity ( to prevent bubbles) shallow pour epoxy.

@SamMacyDesigns Год назад

I have both types of epoxy and this one said use for anything 1” or less. I also have a deep pour epoxy which can cure up to 3”. I think I must have screwed up the mixture on this or something

@WildPitchDesigns 2 года назад

Great project as always, keep up the good work Sam. Btw, where did you get that apron?

@SamMacyDesigns 2 года назад

Thank you! Here’s the link to the apron, I love that thing and it’s super affordable! huckberry.com/store/readywares/category/p/70072-tool-apron?htm_adsource=shopping&htm_admedium=googlep&htm_adcampaign=shopping-all-acquisition&htm_adcontent=acquisition&gclid=EAIaIQobChMIyOCK4e6R-AIVdzizAB3AhQGWEAQYBSABEgKiM_D_BwE

@WildPitchDesigns 2 года назад

@@SamMacyDesigns Just ordered one. Thanks a bunch man!

@SamMacyDesigns 2 года назад

@@WildPitchDesigns No problem! I hope it works for you!

@midnightsun2483 Год назад

@@SamMacyDesigns I just ordered one too

@Zufoto19091979 Год назад

Great job! Is the epoxy food safe?

@SamMacyDesigns Год назад

It is, and so is the finished I used. Rubio Monocoat

@JackonGzc Год назад

Awesome video! What tool path and bit did you use for the carve?

@SamMacyDesigns Год назад

Thanks! The tool path I used was just something I drew on my IPad and I used an Amana Tool RC-1142 from Tools today for the carving portion of the build. Hope that helps!