Thank you very much for this video....I have the same problem, yesterday HDMI output 2 stop working with no reason...I think I have to change the ic as you did in your video!! can you give me the name of ic in order to take it
I have the same problem too. I replaced the chip but problem not solved. But only one day 2nd port worked. But that day 1st port not worked. Only one port worked each time. Also i have a doubt if it is coming from atem firmware....
@@Smediaproductions hi if ics for outbut check filter and check ics for input and out but sometime working if short cable or some tv this mean ics need replace
Hi Bro, my both the outputs ports are not working, it because of short-circuits at my place, is it ok to replace both the IC's or do i need to check other compnents as well for the same issue and where do you stay, if the place is near me will directly come to you for replacement
Hello. Amazing video. I have an issue with my HDMI input. A couple of months ago before I could purchase an optical fibre cable, I decided to use a regular hdmi splitter to extend signal. And even since then, my input 2 stopped working. Can this ever be fixed ? Other input are working perfectly as well as the output. Only issue is that I can’t seem to detect a signal with channel 2 even with an optical fibre cable. Would greatly appreciate a response.
@@diego.ferraz hi you mean dust here in egypt if clear the dust after 1 hours the fan will insert again and why you focused clean and leave the repair ? Strange.
Hello, can you tell me I have atem mini extreme iso, audio from all inputs and also line microphones does not work? Which microcircuit needs to be changed? Or how can I repair it?
@@sedeco99 Thank you for helping me name the IC to replace the HDMI out port. Currently, I have an error that the HDMI in 1 port is not plugged in and cannot be received. I have tried replacing the IC and still have the same problem. Do you know how to fix it?
Hi, how can get in touch with you directly? I have atem mini iso pro and pc doesn't recognise it when connected through usbC! Also hdmi output keeps flickering! Alsi it doesn't reflash any more!
I have an ATEM 4 m/e Production Studio 4K and it is recognized by the computer but then says "Unknown Switcher." Only the fans come on but no lights and all the outputs don't work. The software control says it needs an update but when I do the update is the says "Update Failed! Please check connections and try again." I have tried with a Mac and PC and multiple different cables. I think it got disconnected during an update and has corrupted software on it. Is there any way to fix that?
this need check the voltage first to see if all power working fine or not and inside you can see small press down it and power and try to update again to see cpu good ordead
Can I get the contact for your location in Egypt, I can send over my ATEM MIN Pro with one port damaged by electricity from audio system. I was connected to a live band, I was going through a Rodecaster Pro II and the power damage the HDMI port that was connected to an LED Processor which also got damaged. Send me your email we can talk from there I am in Uganda