Blind Spot Sensor Calibration on a Hyundai | Check BSD System 

Thanks for the content.In Canada Kia wanted $1650.00ca for the rear passenger side sensor.I found one online and installed it myself.The body shop suggestion is a great tip.If i can clear the codes i can have the car certified here and start to drive it.2017 Kia Forte with less then11000Kms

I have 2020 Hyundai Elantra sel and having same problem. Dashboard warning light has triangle with exclamation point in it. Also car does self check and has diagram of car and pointing to rear sensor on dashboard. Took it to get it calibrated and warning light went off but came back on when drove car a few minutes. Right rear bumper has abrasion like a car just grazed the bumper but it's noticeable. Thanks for the video

Hello, do you know if most scanners sold on amazon are able to recalibrate the BSD system like yours did?

I would like to by a scanner for at home use. What function do I need to look for when buying the scanner that will let me know whether or not it can calibrate BSD?

Hi good day wat scanner can I use to do the calibration is there a budget scanner I can use ? Can you please help me

What name exactly for the scanner I can use it for 2014 Hyundai sonata to do same calibration

great knowledgeable video - thanks for sharing

Do you have a shop in Ontario Canada? Does anyone know where can i show my 2024 Hyundai Elantra with the same issue... Somebody bumped on my rear right bumper and now the rear parking sensor doesn't work the blind spot doesn't work.

My car has the same problems. I resat but come back again and again. I think I need to change the also. How much do you charge if I change?

Hi, I have a 2016 kia optima SXL Turbo and looking for desperate help!. I replaced the whole panoramic sunroof assembly because it was broken (front windshield too) but after person Replaced it (SUNROOF ONLY), I had all these sensors turned on (right after used one was installed) CHECK ENGINE, AIR BAGS, LANE DEPARTURE, THE EXCLAMATION POINT ONE INSIDE A TRIANGLE, ABS, EPB, STEERING WITH EXCLAMATION POINT, PRE COLLISION, (CHECK SMART CRUISE CONTROL SYSTEM). Also, I have no back up camera or any camera working , nor speedometer or odometer, gas gauge or temp gauge working or blinker displayed when I put it on. Also no dome lights or mirror lights working. All this happened as soon as the guy was done with the sunroof replacement, Keep in mind the original front windshield was still on because it was going to be replaced the following day by someone else. Also, when it was broken, NO LIGHTS WERE ON AT ALL. So now the sunroof guy is blaming the Calibration on the front windshield but AGAIN, They all turned on when he replaced the sunroof (plus he couldnt get it to work and started pulling out fuses by steering). IDK What to do! He keeps saying the sunroof had nothing to do with the lights coming on...WILL RECALIBRATING IT TAKE CARE OF ALL THIS??? PLEASE HELP!

Hi dear eng can i install orignal bsd system on kia sorento 2016 with out traction control i install it but error time can out signal abs esp esc can skip this error the system work in display screen note check bsd system i made calbration but error need the esc sysem pls help me

Thanks, Singh

Am I BDS system went out on Friday And I was an accident in November and didn’t have issues but then all of a sudden it came on and started working yesterday for some reason didn’t do anything didn’t have them re-calibrate it and now I’m taking it to the dealership to have them re-calibrate it are they gonna be able to re-calibrate it even though it’s back on again

Thank you very much!

Hello I have 2021 Hyundai sonata but tried calibrating it its saying software missmatch how can you help

Hey. I took my car into the service department where I bought it because I am getting that same BSD ck signal. They said that it looked like someone backed into my back bumper and it damaged the control to the BSD. They told me Hyundai wouldn't warranty it because it had been damaged. They quoted me almost $800 to replace and calibrate it. They told me the calibration would take 6 hours and they would charge me $110 per hour labor for that. In this video it looks liked you calibrated it within minutes. I think they are trying to cheat me. What do you think?

Do you have any idea about frequency band for front radar Hyundai Sonata limited 2016??

Great friend ! That’s just the same I need to do on my Mazda 6 2014, my old Autel scanner says the same “missing calibration” but mine has not that function, here in Mexico can get the Autel MX880 if you have some time some day to check specs about it I would aprecciate so much, I can’’t find info if this scanner has that function, thanks for sharing, regards.

What scanner is it?

Before you try replacing the sensor, try just pressing on the sensor to sit it better in its bracket ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lgixiTwyFCA.html I think these sensors just move slightly on the bracket when the car goes on poor road or pothole (or get bumped in car parking), and the sensor moves very slightly which causes the computer to see it misaligned and the system shuts off

Is there a less expensive Autel Scanner System than the MS908S/Pro that will re-calibrate the "BDS" on my 2015 Hyundai Sonata? Thanks, DS

Do I clear blind spot error on dashboard after Installation of new blind spot radar

I have a 2018 Elantra GT. The BSD error message has popped up twice in the last month. Got it fixed once and it's back. Back to the dealer I go I guess

Hi, I took my Hyundai to put on a hitch and the shop zip tied the trailer hitch wiring to the BSD module harness and the service BSD came on. I saw on RU-vid thats a no, no. So I re routed the trailer wiring and zip tied them to the frame of the car, now I have to re calibrate the module. I called the shop and the said they don't have a tool to recalibrate the module to take it to the dealer, I don't want to give them the money to do something like that. So I was looking for the MS908 but they are no longer available, do you think the MS906 do the job?

Tanks bro!!!

thanck you

i have same problem on mine.i have 2018 Elantra.if i calibrate it.its good for 8 to 10 days.but bds light come back again.help would be appreciate it.

I replaced driver side mirror in my 28 teen sonata Now I get a triangle with the! Telling me to check BSD system what type of OB DE to do I need to get that has the capability to reset the system. A replacement mirror is blind spot detector capable is this common when you replace mirrors that you have to calibrate the mirror?

Can you please share the name or link to buy the software you are using?

My car is doing this right now. Only 20k miles. I can restart car and it works again for short while. Sensor mounts getting slightly loose?

Love you

How disable BSD? My kia sedona 2016 have not bsd but I bought speedometer for sxl(my kia is ex) without bsd. Every day I must cancel information "check bsd system" Is possible reprograming? speedometer via obd?

I bought a used blind spot module for my Telluride so I need to get it calibrated

Could you please tell what soft do you use in this video?

My 2018 toyota corolla blind spot flashing on the dashboard how should I do with that please ?

Can bsd system stops a car from moving

Hi where are you located? Im in San Diego, I have a mazda3 what I get that BSM message only after 5 min of driving, it works fine the first few minutes and it the same every time I start the car back up again

Hi, I have purchased the part and I need to know how much does that cost for calibration. I also need to know where can do that I live in Anaheim, California. could you help me?

Hello is this the ms908s or ms908s pro? Do I need the j2534 for this?

2020 tells me to drive above 45 kmph for 1 hour. After doing the coding. Nobody got time for that. But driving anyway and usually these take 15 mins, but nothing yet 😢

hey are you in Canada I need to have my calibration done my mechanic could not get my sensors to work.

Can you do that on a 2019 jetta VW?

How to calibrate drive motor position sensor

I have the same issue and nobody helped me solve it. 2017 sonata shows the same error “missing calibration “ but when I calibrate it, it comes back in a very short time. What should I do? The car damage is in the left back, Does it effect if the radar isn’t in the right place, like 1 cm or 2 away??? And how can I adjust it ?? Is there any way I can do that???

Hello. Badly need your help. I would appreciate it.

Hey! I recently got my mirror fixed by a local mechanic and now it says “CHECK BSD SYSTEM” (after paying $100 for the mirror and then $63 for the mechanic to put it in). I called the dealership and they said it would take $175 to fix whatever the problem is ... please help 😩

I have the same problem now

Barangnya dmna,si ahbee tanya

Variant coding should be done first before calibration.

Can you do this with the im608