รีวิว Anleon S2 IEM GEN2 แบบละเอียด เป็น wireless in ear monitor system ที่ราคาและคุณภาพ น่าสนใจมากครับ
สอบถามเรื่องต่างๆได้ที่
FB:Santipap Rattanapol
IG :boss_rattanapol
ยินดีให้คำปรึกษาครับ
The examination stage originated from the 1960s, and the ROCK band still Noisy found that if each player can hear each other, the sound, performance is better. Or newer ones, send only MIX TO FLOOR - floor standing speakers on the stage "MONITOR SPEAKERS" TO Ful fill this Desire. These Wedge-shaped Speakers Create ERA Audits But They Are Large, Noisy, and Sound Limited One Place . Now, wireless in-ear tire pressure monitors allow you to hear the sound you want to hear without affecting it. These comfortable speaker systems that change the WEDGE class "ear" monitor.
property:
Stereo mixed with type, put in ear detection and able to be fully heard, the most accurate sound detection, compared to traditional MONO mode.
Both MONO and stereo, convenient operation, MIX function
Wireless system, more complex system lines, but more flexible
Wireless 6 frequency system, can support up to 4 systems simultaneously, use without interference.
Carrier options Frequency range: 526-535 MHz.
Specifications:
Type: Wireless Tire Pressure Gauge
Model: S2
Product weight: 483g transmitter, 95g receiver . approximately
Frequency response: 20Hz - 18 KHz
Antenna: 1/4 wavelength
Power supply transmitter: DC9V / 300mA
Built-in transmitter, audio limiter
RF transmitter Power output: 10 mW
RECEIVER Standby time: 12 hours 1.5 V 2XAA batteries not included
Use distance: within about 50 meters, outdoor 100 meters
Carrier options Frequency range: 526-535 MHz in the US in general
note:
1. Excessive use of this system may result in permanent hearing impairment and low volume use as possible.
2. If you do not use this product for a long time, please remove the battery.
3. Please note that there is no battery included in the package.
4. Please allow a little error due to manual measurement.
5. Color monitor may be different. Thank you for understanding
Rear panel transmitter:
on / off button: change power, turn on and off;
Input L:Receiver signal via XLR cable and stereo mode, signal sent to the left channel;
Input R: receive the signal via XLR cable and stereo mode, signal sent to the right.
Receiver design:
LCD screen: display frequency, channel and battery level
Antenna: The antenna receives RF signals from the transmitter.
Status Indicator: Green indicates that the battery is working correctly.
Headphone jack: Yes
Ports and Volume KNOB: Yes
Frequency adjustment button: Yes
Battery compartment: Yes without batteries
12 сен 2024
