BMP Forward Facing Manifold is INSANE!!!

Подписаться 1,1 тыс.

Просмотров 23 тыс.

50% 1

BMP Manifold and charge pipe kit:
www.precisionr...
Instagram-
/ the_fuel_channel
Installed a forward facing BMP aluminum manifold and charge pipe on the Single Turbo N54 Powered BMW 135i. Had to modify the Fuil-it fuel lines, power steering, vacuum hoses and much more.
My current mods:
Ghassan Automotive engine
-Carrillo rods
-JE pistons
-Upgraded rod bearings
DocRace ST precision 6266
BMP Forward Facing Aluminum Intake Manifold
BMP Charge Pipe
E92 M3 LSD Differential
White Line Differential bushings
E92 M3 Axles
3.5” Custom one piece aluminum driveshaft
Wedge 93oct and E85 custom tune
Fuel-it stage 4 LPFP (Dual Walbro 450s -6 fuel lines)
Flex Fuel sensor
Fuel-it PI with Bosch 750cc injectors
PI split second controller
15PSI Hobb’s switch
Precision Raceworks coils
NGK 97506 Spark plugs
Wot box
VSRF 7” intercooler
VSRF Chargepipe
TIAL blowoff valve
TIAL Wastegates
BMS OCC
RB External PCV with Mishimoto OCC
Index 12 injectors
Aluminum radiator
Active Autowerks exhaust
Spec stage 3+ clutch and SMFW
H&R premium Coil overs
Apex arc 8 wheels
Federal 595RS RR tires
GFB 3 Electronic boost controller
RTD Short shift kit
Alcantara flat bottom steering wheel
LCI headlights
Black roof wrap
Carbon Fiber trunk lip
Black M3 mirror caps

Авто/Мото

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@Drshaqueal 3 года назад

Nice Invisible flames!

@billywolfe4086 Год назад

I punched this manifold and had to return it because it did NOT fit in a 335xi looks dope im actually getting mine put in next week.

@blrn54 3 года назад

Polishing turbos is a bit old school. You will have to re do your fuel map after installing intake manifold so dobt go beating on it straight up. I had to up all my fuel scalars after installing Plazmaman one.

@BVonBuescher Год назад

Prob too late, but I go with paint. I just bought some Cerakote, they have a ceramic coat that air dries no oven needed, and it is equivalent to a powder coat. I plan on doing my engine, oil pan, and any other areas I can access while my engine is out. I’ve got a zinc/copper color, red and matte black to work with!

@famousmidnight 3 года назад

The FF manifold is worth is just for looks. so much cleaner

@hitstothebrain3288 3 года назад

I got the same one in black for my single 135i, makes everything look better in the bay!

@TheFuelChannel 3 года назад

I agree, huge difference!

@Salvantos 3 года назад

What did you do to extend the throttle body vacuum line to reach properly

@ronellpemberton5402 3 года назад

Paint the manifold! 💪🏾

@el.africano2156 2 года назад

Can fit that intake in 135 is n55 custom or modificación parts

@pindypkkung 2 года назад

This make better looking and durability.

@88budz 3 года назад

That monster is nice but it's like nearly 300 calories, the ultra fiesta is banging imo and like 15 calories

@e46m3lol 3 года назад

I think you should powder coat the turbo and manifold pink!

@TheFuelChannel 3 года назад

Hahaha

@jerichotomlin5356 4 месяца назад

This is an old video but im having the same problem with the rad fan. What did you end up doing?

@e46m3lol 3 года назад

Looks bad ass!

@jurzyjohner432 3 года назад

Are you serious bro? You purchased a beautiful piece and now you want to paint it ok, you just of just left it stock in that case, It looks great as it is.

@TheFuelChannel 3 года назад

Lol

@LMLracing 3 года назад

Were did you get the harness extension for the Throttle body???

@grvyrdgang5672 3 года назад

I want to Install this style manifold on my E36 but I don’t understand how the idle control valve and the fuel rail lines would work

@bamsr9051 3 года назад

I have a few questions for you. 1. You change the fuel line to AN fitting? 2. The 2/3 vacuum line to which hose? 3. Cable to throttle body need to extend?

@TheFuelChannel 3 года назад

1-Yes 2- one to my bov, one to fpr, one to oil catch can 3-Yes

@Bad_m340i Год назад

Did you install the phenolic spacer?

@Xx5oulTak3rxX 3 года назад

What’s the update on the power steering bracket location how’s it looking

@dejandadude 3 года назад

i've never heard a bmw sound like a civic

@BVonBuescher Год назад

Haha … beat me to it! I was wondering what the hell was going on, then I saw the pull string in back and if all made sense!

@tony.nextlevelrides 5 месяцев назад

I have the same manifold to install, did you run into any issues with the throttle body being rotated 90 degrees clockwise? tune remained the same?

@whaws 5 месяцев назад

Where did you buy this? It’s sold out everywhere/backordered

@tony.nextlevelrides 5 месяцев назад

@@whaws I got it used off the N54 group in the states.

@whaws 5 месяцев назад

Which group by chance? Are you referring to a Facebook group? In a bunch that I check daily and can’t seem to find anyone ever selling anything decent

@Gongdeadman 3 года назад

I didn’t see any flame from that civic

@obiedaatiyani409 2 года назад

Link to the coils bracket please?

@baautosgarage528 Год назад

Does the aluminium manifold fits on bmw n52

@troy335i3 2 года назад

How much more horse power does The manifold gives you

@DSWGamingMCSG 3 года назад

Where does the fuel like from the port injection to on connect to the rail? Did u have to make a custom one or did u use the one with the fuel it kit

@TheFuelChannel 3 года назад

Connects to the back, and had to make a custom one or you could pick one up at precision raceworks

@mperez9745 3 года назад

Have you or anyone else done a before and after dyno of the manifold?

@TheFuelChannel 3 года назад

I have not

@dolphinfan1493 3 года назад

Hey, bro i just got the manifold for my 335is installing now, Can you tell me the size is the last bigger port of the 4 on the back of the manifold and what did you run the bigger port with the big vacuum hose to? are you using it with your pcv setup?

@TheFuelChannel 3 года назад

I think the bigger one was 3/8 and I use it with my pcv.

@wrecker4267 3 года назад

What fuel pressure regulator system is that? I see you have fuel it lines but down day Wich FPR

@TheFuelChannel 3 года назад

It’s Fuel-it as well.

@samp7288 3 года назад

Do you have a video on your catch can setup?

@TheFuelChannel 3 года назад

No, but I have the kind I have on the description

@ginette1u1suck 3 года назад

Hey bud, Im in the same situation as yours on the radiator and rad fan. Can you tell us what you ended up doing? I also have a csf rad and will be installing the forward facing intake from bmp soon. Thanks man

@ginette1u1suck 3 года назад

I just saw that you shaved the shroud, you have a picture by any chances to see how much that needs to be trimmed? Thank you

@TheFuelChannel 3 года назад

Sent me a message on IG, I’ll see if I can take a picture now. Didn’t take a picture while it was off. The_fuel_channel