BMW 328i GM GA6L45R transmision fluid and filter replaced! (how to) 

Luv this guy!!! Very informative, and he's from America!!! LOL ;) Thanks brother you do a great job on helping us work on our BMW's 2012 328 ix e91 3.0 natural aspirated.....

Good video, thanks for the tip on how to differentiate between the ZF and the GM transmission. That ring problem also isn’t mentioned in any other video.

Thanks for making the video. I don’t have a pit where I can work under the car so I’ll have to jack up the car and do it with limited space. I’ll comment when I’m done.

Wow, I need a service pit ... great video!!

Nice video,thank you

Basically the same thing as with the zf transmission. But that filter seems to be a pain in the ass to change! Good job!

Im excited for the power too man

I have changed the oil BMW 325i gm 6l45 box , 120 000km with all spares from agents. 2 years ago, I get jerky down changes sometimes, any ideas? What could be the cause the old oil and filter were in excellent condition.

Thank you

i got Transmisson fluid deteriorated code and it shakes at 40 mph i got a 07 328i e90 any advice ? would changin the fluid + pan nd filter help my situation? is aluminum pan the way 2 go?

Hola, tengo un BMW 318i y cuando voy en marcha y disminuyo la velocidad como para pasar un obstáculo o para detenerme hace como un leve desplazamiento podría llamarse, me pregunto a qué se debería? Muchas gracias de ante mano!

Can Total MV LV ATF which is suitable for Dexron 6, Mercon work in a 320i E90 LCI BMW GM Gearbox

How to get an update for this?

Hey man I have the same transmission, in my 2010. I am looking to do shift solenoids, are they same as ZF tranny.

What did you do to add 300hp?

i thought the rear wheel drive 328i had plastic pans??

Thanks from Russia

I changed just oil and only 3L 800ml. Done all the temp/gears car on level ground. Filled with running engine on 40c gearbox temp. With scanner

How many quarts of oil do you need

Greetings, guys. Can someone share a link or P/N for this transmission filter

I recently did transmission fluid and filter change on my Bmw LCi 320i which uses same GM transmission. Drained transmission fluid came out extremely black brown so I was worried may be I did mistake and may be after filling new fluid I will get slippage. magnet was ok with normal sludge or debris no metal shavings so it was sign of relief. Fluid came out only 4 Litres but filling back @ 45C it took 5.5 Litres I don't know why. I used AcDelco pan gasket Part No. 24225800 which was half the price of BMW genuine gasket(original gasket is also AcDelco made for BMW). Filter is also available in AcDelco but price was same as Genuine BMW so bought Meyle filter. To surprise shifting was really smooth and unnoticeable before fluid change I had harsh shifting between 2 to 3 and 3 to 4 that cure the problem and now I have silky smooth shifting between all gears. I preferred using ATF Kandell Dexron6 .

Where you add fluid?

if you want to avoid removing the sealer ring for the filter you can remove it from the new filter and reuse the original one. other than that everything was correctly done

First time changing transmission fluid, nonetheless replacing a transmission filter, car drained 6.5 liters, and put in about 4.5 liters in, and 3 more liters when started up, and ran thru the gears (2 person job), and I’m worried I put too much in, any thoughts?

great video, what was the km on the car, the old oil looks fine to me

Did you replace the gasket,I have the same transmission and I'm dealing with a leak, was gonna just replace the gasket for now. Can't afford the full kit.

what year is the car that you are doing the work on? If I'm going to attempt this I want to make sure that I'm doing the job the CORRECT WAY! Pleas let me know thank you for your time.

About how much would this cost ?

How long did it take you to do all the work in the video? Thanks

What year 328i was this car you're working on?

Great video 👍 problem with the automatic transmission transmission Faulty drive moderately possible to continue journey Reduced acceleration Have checked by near bmw service Then a message appeared on the crash detector Code 0056c5 EGS: Shift valve B: stuck in off position Code 0056BF Clutch gears 12 3 and 4: neutral test my BMW 320 I 2008 Transmission GM Number GA6L-45R chassis Number D A B V G 99050V C81681 Thanks

what is the torque spec on those bolts, by the way, did you replaced them? Thx

did u use gasket sealer for the pan gasket?

Good work! which year is your car?

How much did it cost you to get that service pit installed? Seems very useful and probably costs less than a lift, no? Great video by the way

Não mostro como por óleo novo

No gasket needs for oil pan?

The best tipp was with the plastic or metal pan for the transmission.

How many Letters the transmission takes with you ?

What fluid did you used. Dexcron vi?

a question did you put the oil on the car? or did you put the car off?

How is running?

Hello, my name is Pepe Cuál es tu my name???

Im feeln like you got some sketchy ass brick lift

Bullshit I have a metal pan and there is only an electrical connection where the fill plug should be

“yeah” lol

I thought you weren’t suppose to change the trans fluid…

How many liters did you put in?

Bad automatic transmission!!! Very very low resource of gidrotransformator friction pad. second problem is mechatronic.

Much better gear box then the shitty gf transmission.

is this car xdrive?

This is not a GM transmission. It's a ZF transmission made for GM (and other brands).

Dracula Trans Service $249.99

Заливал такое масло в эту АКПП, крайне не рекомендую. Появились вибрации при медленном разгоне. Лучше FEBI

Where did you fill it ? Poor video