BMW E87 1 Series 2006 - Replacing Rear Electric Window Regulator 

Thanks for the video. My E87 window regulator broke on the exact same spot as shown in the video. 🙈

Thank you so much, had exactly the same problem with my window last Saturday, called the panel beater, he didn't show-up, decided to check it out myself, found your video and my window is working fine, did it my self. Unfortunately I couldn't find a used mechanism, had to order one from BMW, cost me equivalence of 142 pounds (I'm in Botswana), and that doesn't include the motor, had to take the old motor and fit to the new mechanism. Point is, I'm still thankful because you made your video practical and to understand.

fixed mine thank you for the help!

I just changed my regulator. I found this video very helpful and instructional. Especially the removal of the door trim. I would not have known to use that much force. Thank you.

Made easy to follow and also explained well. I feel I could confidently do the same watching this.

Thank you! Great video, easy to follow, cant wait to install mine and save some money!

Excellent job thanks. i opened my window in 5 min with your help.

Very good description, with your help I spared a lots of money, thx😊

Excellent easy to follow description & video; many thanks.

Hi I found your Video very informative and easy to follow. I have bmw 118d Mport E87/N47 2008 5 Door Hatchback and whilst driving the OSR DOOR glass dropped down and would not go back up. So i followed up your instruction and got stuck whilst I was undueing the Torx20 screws, the top screw I managed to open but when I was attempting to unscrew the bottom screw I found that the previous owner had tightened it so very very hard and have used a power driver and found the screw head was stripped/chewed up. I tried all different methods to unscrew using rubber band but to no avail, it is very very difficult being the screw located inside like a tube, I have tried drilling the head in anticlockwise and then used the AM TECH screw extractor in anticlockwise, also used the SPEEDOUT EXTRACTOR int he same manner but to no avail. So hence I have drilled the head out but still no sign of coming apart from the metal door frame (I did opeened up all the plastic pins which holds the panel in place and pulling up ans away from the top horizontal clips etc). Do you think the white plastic part which takes up the screw behind the panel would have melted during the heat generated from drilling? I dont not think so, I may be wrong? Any suugestion/feedback would be greatly appreciated, Thanking you, Regards Raj

Thank You for this vídeo. Today I need to check it out the Pilot rear window.

Well done video, easy and clear instructions...

Thanks for this video, yesterday I open my back door and change the windows system, I found quite difficult to unplug the windows button but apart from that everything go smoothly . Thanks again you save me a couple of hundred euros. Btw I order the windows replacement on ebay and worked perfectly. 👍🏼👍🏼👍🏼

Super nice! Thanks.

Thanks a lot, quite useful clip and Job done , yayayaya 😍😃😃😃

Thank you verry much Sir!!!!

Very useful thanks

Grazie per il video

Had mine done today but when you close door the window doesn't click upto top small gap? Does it need realigning?

You could use a hair dryer to warm up the tack abit.

Hi thanks for video, I have exactly the same issue, do you have the part number for the widow motor array in its entirety for replacement? Thank fully my glass survived!. Cheers

Hi help me,what is problem, front passenger window button not going down,only up,but driver side button working down and up good!??bmw 118d 2007

The window won’t let me pull it up and it tries to pull itself back down. Would you know why or how I could fix this problem. I tried to use the window button to help wind it up but it would just make a cracking noise inside the door

Is the e87 windows regulator same as e90.....by the way great video sir...

Who else broke the clips on their window switch? It’s not easy to get out (on my e87). Probably easier to leave the switch in the door trim, and use a bit of string or something to stop the weight of the trim damaging the switch cable. That’s a faff, but better than having to order a new switch because you broke the clips 😢

👌👌👌👌👌☘☘☘❣