BMW M47 / M57 EGR VALVE & COOLER DELETE 

This is by far the best egr delete video. Thanks

All that is needed is clean the valve and block the 6mm I'd vacuum hose works a treat on the M47R

On US you have to have tune to run thus setup but makes major difference. You have to get intake as well or you will be smoking...

Did you have to code anything out of the ecu?

Nice video and so helpful ! I cant understand what’s the difference between deleting egr . And deleting the egr and the egr cooler . I have an bmw x5 m57n and I love it I am planning to do the delete !

Anyone who is worried about climate change or emissions should not be watching these videos. If you want to improve your life keep watching here.

This is how you record and explain mechanical stuff! Great channel and content, keep up the good work!

In my opinion best way is just to remap so valve always stays closed and than you don't need to remove anything and on inspection it will look like EGR is on and there is no way of telling that it has been moded.

Was thinking about it myself. Just replaced my two stats thou so probably leave it till summer. Great to see you starting on the oily bits😄

GREAT and for the engine light? OBD?

Is a remap needed after EGR delete?

does it affects co2 gas emition ??

is it maybe i delete the egr cooler and not the egr valve itself

Is it going to work if I first take it to a shop to switch it off from the software and then remove the EGR myself? Great video as always George!

As a relatively new owner of an E61 535d, can I ask what the purpose/benefit of doing this is? Thanks

Will this throw an error up without a map?

Do you have to remove the egr software also once you physically remove it?

Hi George will this kit fit on my 120d m47 engine the cooler and egr valve looks the same

will you need to drain the cooling system or did you just remove it with coolant in it and put the blanks on?

What about coolant temps?I still have the cooler and the engine works at 56/60 degrees.I think that the EGR thermostat is gone.

how does this work when it comes to MOT time?

George Sir, I've followed your very informative videos, my lad has an 320d 09 plate, he broke down, drivers side intercooler hose collapsed under load, have changed this, now found out egr valve broken, have changed this. Turbo turns very slight play. Car lacks power. Any ideas where to look. Appreciate its an unknown. Thanks

simple and clean very much appreciate

Thanks What does the socket you connect to the turbo hose do?

Hello George! I have BMW X5 e70 want to delete egr and dpf! Where are you located ?

Great job mate as usual , keep it up ! one question , in case i have an throttle body ? what should i do ? thanks

This doesn’t trigger any warning lights?

After removing the EGR cooler, does the cooling water warm up more slowly?

Did the new hose that fits the egr to intake come with the kit?

my compliments George, I also thought about removing it because I believed that the EGR was causing a malfunction on my N47D20C (240,000 km), during acceleration, only when the engine rpm reaches 1500 rpm, a net vacuum is created, as if the engine shut down for a fraction of a second. I thought it was caused by the poor electronic disconnection of the EGR due to sludge or carbon from the exhaust system, but now it is clean, like the two mass air flows: despite this, the problem remains as before. It could be a valvetronic problem, so now I would like to clean the two solenoid compartments and the filter compartments, but I can't find them! Do you know where they are located? Am I on the inaccessible side of the supply chain? If you have the answer, you would be of great help to me. thank's Andrea, from Italy

So if I do this will I have to delete the dpf as well? will it get clogged up more quickly?

Is it possible for antifreeze coolant to get into crankcase oil from EGR ?

If you remove this does the engine light illuminate, also how can we have the light reset or removed if so. Thank you

Are those coolant blanks working? Did you have any leak? I want to delete egr in my m47 and i wonder is it going to hold. Do you think adding 2 part resin glue to those blanks would be good?

Hi, I have there e90 320d I've had the dpf out and deleted, egr deleted but not blanked, swirls flaps out and a stage 1, feels a little better but deffo not 206bhp like I got told it will have, should this fix the problem? Thanks

hello where to find this egr and cooler removal kit?

Hi there, where did you get the kit with the silicone hose? Not listed on Darkside. Thank you.

Do ya have to map it out? Or will it still run the same once blanked? I've blanked mine and since is running poor with code 1613 smooth running control with no other codes any help I'd really appreciate cheers

Thanks for this video, will definitely be doing mine! Can I just ask, will this kit fit on an LCI 525d?

Any idea on the size of the red caps to close pipe?? Once cooler is removed

Greate work, easy to follow..

Hi bro, do i have to do a egr off map on the bmw e90 320d m47 2005, the engine is without dpf from fabric?

I got my egr mapped out, now I'm looking to delete the egr cooler and thermostat. I read somewhere online that there were cars originally without an egr cooler, so it got me thinking is it possible that there was a return pipe without the connector for the egr cooler, but I can't seem to find anything. The only thing I could find is the normal version 11 53 2 249 779 and 11 53 7 802 630. As for the lower radiator water hose, I think there are two versions, 11 53 7 789 718 - with the connector for the egr cooler, for the second version I found two different part numbers, 11 53 7 787 916 and 11 53 2 249 779 - both without the connector for the egr cooler. If there is a lower radiator hose shouldn't a return pipe without an opening for the egr connector also exist (shown at 6:28)?

Do you know size of the blanking caps? :)

my bmw e91 m47 is already remapped can i still remove my egr valve and cooler? will there be any issues?

what size silicone tube goes on it?

I have a 535d E60 egr delete but the egr cooler and thermostat is still there, I've had no issues but is it better to remove and blank the cooler?

More freebies. Smashing it lad

Hi George, A couple of questions please... So there is no need for any software mapping to avoid errors when deleting this? Also, I understand the MOT tester can't see the removal due to engine covers hence should pass the MOT, but are the emissions okay? MOT doesn't test of NOx but without the EGR isnt there more smoke? Does this still pass an MOT?

how do you bleed the system if the EGR cooler plugs dont have a bleed screw.

Brother When you shut down the ENGINE you listen a noise from the vaccuum pipe Because you blanked the pipe Its True brother?

If you bung off the presure pipe will tht just do the same as this or is there issues with doing it that way i have 330d m57

Can anyone tell me the diameter of the res coolant pipe blanks used?

Do you need a remap to do this egr delete?

Good Vid tnx.

Hello George.I have an E83 M47TU.Can I delete EGR via software only without dissasembling all this hardware?I mean it is necessary to do all this job?Isn't the same if someone programms DDE to delete EGR function,so it stays always closed?

Is it not possible to just block the port on the exhaust manifold and leave all the EGR crap mounted so it will pass an MOT?

Good video, very helpful, what about the engine light on, do we need to remap and remove EGR, or do the engine good fonctionaliy will be impacted?

what car was this on?

Finally removing that crap and wheight

This is why want mine gone, fed up of them failing, even a BMW stat will last a couple of years at best so I'd rather have one less to worry about and have all that space on my M57 engine free and I "think" you could even change the main stat without the EGR cooler in the way after that? I had a look at darksides kit but I can't make my mind up as to whether or not it's worth the extra money over a generic kit.

George as ive said, ive just bought my 2006, X5. Do i really need to delete this ?? Today i cleaned the EGR, which was not that diff !! So why do i need to delete it, can you remind me why ????

Can these red caps be purchased separately I need some to remove the cooler !!

Hi. Did you need to bleed after doing this? Noticed you lost quite a bit of coolant. Cheers

Hi George, does the car throw a warning light when the egr is removed. I'm thinking of doing it to an e81 with n47. Many thanks.

Brilliant video straight to point. No dilly dally my name is etc thankyou so much. Car sorted. Garages rip u off telling you £700 turbo. Ur the best

Please, does anyone know the diameter water pipe blanks?

In a simple words, remooving EGR and its cooling pipe. It is enougth to stop, block vacuum pipe to the solenoid Who is in charge for EGR. And it is done.

I did exactly as in the video, I have a problem though with the vacuum hose, it makes a sound for a couple of minutes every time I turn off the engine. Can you help me with that?

Did u have to reprogram so the eml didn't come on?

Hello there. After canceling the egr, downshifting started to be slower when it came to the slope, also the downhill engine brake does not work anymore, the gear shifts seem to be cumbersome, why?

Is it possible to do an EGR delete without removing the DPF or should these be done at the same time?

HELLOGeorge, i had a split in the large intake hose that fits on to the EGRpipe, but when i started the engine after fitting new hose it was sucking the new pipe in, any sugestions, Geoff, ie super videos.

Заєбісь відео, гарно все показав

Can you do this if you have a dpf filter fitted? 530d E61 LCI

My question could be a really stupid one: isn't it enough to just blank the vacuum hose that goes into EGR?

Good video But don't need to actually spend money on those red caps to blank coolant. You can just leave the original hoses and insert some big screw inside this is how i done it works perfectly

After delete did i still need the prasure convertor valve ? If i can block the vacum before not after it ? Or i will get code and one more question i did softuare egr delete and psy delete and i get code for emissions 4501 how to remove it ? Thanks

can you please send me a link to purchase the kit , your videos have taught me alot thanks mate

@GeorgeAusters At 3:58, Does that vacuum hose need to be blanked does any one know?

Your lucky mate i have to buy everything and tell people that companies send them me free

Domanda dove posso trovare i tappi rossi 🤔

Where is the best place to map it after her removal and how much it cost

Had you cleaned your egr prior to doing this video?

is it possibile to just close egr vacuum hose,and make egr not working,instead of regular egr delete procedure ?

do you need to remap ? or it only needs to be fizical delete ?

Hi, i have an M47TU2 on an 2006 E90 318d. If i remove the EGR Cooler, do i have to worry about the DPF Regenration? Or can i just remove the whole thing and i have nothing to reprogram? Many thanks!

In Germany this has several consequence if detected: tax evasion, because emission reduced cars enjoy lower taxation, loss of insurance coverage because of loss of general operating permit. Cannot recommend..

Hello man, I own a BMW 118d N47 but stopped by on this video to tell you that I learned a lot more than I already knew and when I next go to the mechanics I will make sure I put it into use. Many thanks! I wish you all the best in future, subscribed.

Hey🙂 I saw your another video,when you remove/delete the swirl flap from the M47...and now,I'm watching this one. Could you help a bit?: Have to delete the EGR+Cooler also,if already removed/deleted the swirl flap?! Many Thanks Your Help👋

I noticed you but the vid fitting the cooler plate, you probably cursed like hell trying to get it in 😆

I know is an old video but - instead of complete removal of the system I saw someone used a semi-blanking plate on exhaust pipe with a 7mm hole - the goal was to reduce the amount of recirculation gas without triggering the check engine light and still reduce the temperature in combustion chamber - any experience with that?

I threw away my bmw e46 320cd egr for 20 €. All that was needed was to egr delete the kit without ejecting the hoses and then to block the hoses with 18mm screws 😅

Need a reliable honest person for remap PLEASE !! Bmw 320d 2006 I'm in Birmingham

Hi George will this kit fit on my 120d m47 engine the cooler and egr valve looks the same

badass guy in did you know the problem you are the real deal chapeau bas mon gars real precious advices and tips

Hi George will this kit fit on my 120d m47 engine the cooler and egr valve looks the same

Siemanko wymontowałem egr i chłodniczke egr i zaslepiałem jak kolektor wydechowy w zestawie który kupiłem oprócz grubej blaszki była uszczelka I też ja zamonotowałem a teraz nie wiem zdjąć ją bo widzę każdy daje tylko blaszkę?

But is good to explain the stuff overall

Please are thère any video about deleting egr for 2.2 chevy captiva or cruze (deleting and let the egr on engine)