BMW R1200gs Adventure 2007 transmission spline lub & final drive rubber boot gaiter replacement

Подписаться 6 тыс.

Просмотров 62 тыс.

50% 1

How to replace, change final drive rubber boot flexible gaiter, lubricate transmission spline on a BMW R1200gs adventure
Follow us on Facebook: / frogsangelslondon
BMW R1200GS Adventure 2008/2009 Maintenance & services playlist: • BMW R1200GS Adventure ...
BMW R1200GS ADV 2008 Valve clearance and engine oil change: • BMW R1200GS ADV 2008 V... BMW R1200GS Adventure 2008 final drive Oil change: • BMW R1200GS Adventure ...
BMW R1200GS Adventure 2008 front brake pads change: • BMW R1200GS Adventure ...
BMW R1200GS Adventure 2008 air filter change: • BMW R1200GS Adventure ...
BMW R1200gs adventure 2008 broken fog light replacement: • BMW R1200gs adventure ...
BMW R1200gs Adventure 2008 Head light bulb clip holder repair: • BMW R1200gs Adventure ... BMW R1200 GS Adventure 2008 Fog LED light and fuse change: • BMW R1200 GS Adventure... BMW R1200GS Adventure 2008 swingarm gaitor rubber boot repair: • BMW R1200GS Adventure ...
BMW R1200gs changement du soufflet de cardan et transmission, змена карданных сильфонов і трансмісіі, смяна на карданните синдроми и трансмисия, promjena kardanskog remenja i prijenosa, změna kloubového měchu a přenosu, skift af cardan bælge og transmission, kardaani lõõtsa vahetus ja ülekanne, kardaanipalkeen ja voimansiirron vaihto, Wechsel des Kardanbalgs und der Übertragung, αλλαγή των φυσητήρων και μετάδοσης της cardan, breyting á kardanbelg og sendingu, cambio del soffietto cardanico e trasmissione, カルダンベローズとトランスミッションの交換, 카르 단 벨로우즈 및 변속기 교체, kardāna silfonu maiņa un transmisija, kardaninių dumplių ir transmisijos keitimas, bytte av kardangbelgen og transmisjon, zmiana mieszków kardanowych i przekładnia, mudança do fole cardan e transmissão, schimbarea burdufului cardanic și transmiterea, замена карданного сильфона и трансмиссии, zmena kardanového vlnovca a prenosu, menjava kardanskega meha in menjalnika, cambio de fuelles cardán y transmisión, byte av kardanbälgen och transmission, เปลี่ยนเครื่องเป่าลมและการส่งผ่าน cardan, kardan körüklerinin değişimi ve şanzıman, зміна карданного сильфона і трансмісії,

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@scottdavies9336 9 месяцев назад

The service manual mentions that after swinging the final drive up and engaging the driveshaft and replacing the bolt. the lock nut is not reusable and only a new nut should be used. I reused the old nut as you did with locktite and I noticed later that the nut came loose and backed off. The service manual was correct and we should use a new nut.

@DudeGuyWho 2 года назад

You guys put out some of the best content (e.g. good video angles and lighting, stating each tool/fluid needed and torque spec as it happens, neither too slow or fast and no obnoxious music background etc.) Only thing I'd suggest would be a single list of all the items needed in the descriptions or a link to google doc or your business page showing the needed items. Depending on your business model, it might help drive added revenue by bringing people to your pages.

@1KemosabeLarry 2 года назад

Best clarity video of ANY! LIGHTING, cameraa, aim at work and, and specifics are gtrat. No mudahe conversation, as your camera man speaks clearly with his lens!

@mmaaddict78 2 года назад

Thanks for the great video. I used it as a guide while performing this service on my bike yesterday. Noticed the front boot had some cracks that were not all the way through yet. I ordered the boot and will replace it the next time I grease the final drive. I'm sure I'll be watching this video to refresh my memory when it comes time to do the job again.

@FrogsAngelsLondon 2 года назад

You're welcome. Glad it helps. 👍

@allanthebiker 3 года назад

Got to say that was one of the best final drive servicing videos I have seen. Okay I have a R1200RT, but the principles are basically the same. Nice one.

@FrogsAngelsLondon 3 года назад

Pretty much the same indeed. Glad it helps!

@govertvanlieshout1668 3 года назад

Met deze video durf ik dezelfde reparatie ook bij bij mijn motor uit te voeren 👍👍👍

@jshbrwr 2 года назад

Thank you for posting this. This one and your other one have been super helpful while I worked on my '12 GS....so far so good! I'm putting it back together now. Also, I love the no talking, and text showing what size tool and torque is needed...very good!

@timmusaka9577 3 года назад

Thanks buddy for the perfect video! My local BMW dealer wants $650 for labor and $85 for a part. NO WAY!!! I'll do it myself soon.

@FrogsAngelsLondon 3 года назад

All you need is a few tools, a bit of time to spare and the job is done. Make sure you tighten the left swing arm bolt to the correct torque setting. The initial torque is 10Nm as shown on the video. All the best mate. 👍

@golanmoto 4 месяца назад

very well-done job, excellent video, I have an R1200R 2007 and it's basically the same, BMW made some homework on those bikes so on the new models you do not have to disassemble the whole rear arm in order to extract the driveshaft and that is a beauty. I managed somehow to replace the boots and grease the splines without taking off the rear arm...but it was not easy to connect back the shaft to its place.

@denisthek 2 года назад

Thanks for putting in the torque specs, love your home made tool with the allen. Also like that you show what you are using, I am a big fan of Loctite 243. Thanks again good job. Denis Kerechuk.

@FrogsAngelsLondon Год назад

Thanks 👍

@kevincollins9466 3 месяца назад

Excellent video. Thanks for taking the time to make it. It is very helpful and confidence inspiring.

@kevindewet5659 Год назад

I'm planning to replace the rubber boots on my 2007 GS. Excellent tech instruction. I'm confident to tackle the task. Shawn said it as it is. A big thank you, Frogs Angles

@FrogsAngelsLondon Год назад

You're welcome. Make sure that the swingarm is torqued properly using a 12mm Allen key and a 30mm socket as shown in the video. If you live in the UK, you can buy a long 30mm socket in Halfwords and make a hole with a disk cutter. No need to buy an expensive BMW dedicated tool. I can send you some photos if you want.

@kevindewet5659 Год назад

@@FrogsAngelsLondon Thank you for kind offer, however I live in South Africa. I am a retired Auto mechanic and will make a plan. Many thanks.

@GoodkatNW 4 года назад

Just found your videos, and they are an absolute godsend Please keep it up, you are much appreciated

@FrogsAngelsLondon 4 года назад

Cheers buddy will try my best 👍

@alaindenninger659 4 года назад

Another great video!!! Next, alternator belt, break fluid, air filter and with all the rest done à few months ago, that is a fully serviced bike, cheers my dear

@FrogsAngelsLondon 4 года назад

Comming soon buddy. Cheers

@rigggs1994 4 года назад

You have saved me an absolute fortune with many of your videos. Thank you

@FrogsAngelsLondon 4 года назад

You're very welcome mate. I use the Haynes manual a lot and I bought myself the BMW service manual CD rom which gives plenty of photos on how to do things. Real saver. A bit of tools grease and lub and off you go!!!.

@davewillis2036 2 года назад

Awesome Video,people like you are worth their weight in gold, I have to do this job shortly, discovered it today 😔Only tool I haven't got is the slide hammer, what size is the thread that you screwed the pin into ?

@1745vlad 2 года назад

Very useful video! Thank you so much!

@edmian3567 4 года назад

Another excellent video...👏♥️...Game enough to try it on my own now....

@FrogsAngelsLondon 4 года назад

Give it a go mate and enjoy it! 👍

@britfin007 5 месяцев назад

Excellent video!

@rickjones8159 2 года назад

Excellent, just what I was looking for...thanks

@FrogsAngelsLondon Год назад

Glad it helped!

@DudeGuyWho 2 года назад

Excellent high quality video! Thank you! My only thought to improve it would to be add more direct lighting and perhaps tools/replacement seal names (affiliate links?) in the description. Regatdless, this is awesome and well-made content. Thanks much!

@FrogsAngelsLondon 2 года назад

Thanks mate. Need to invest in video equipment. Hope it helps. 👍

@DudeGuyWho 2 года назад

@@FrogsAngelsLondon....I actually think it is pretty good. Lighting was usually sufficient. I bought a NEBO HIGH BRIGHT 6000 which plugs into a regular lamp socket and allows for changing angles - only $40 in US.

@antonioaugustovaladares4356 2 месяца назад

Excellent video. Thanks

@ianrice8622 Год назад

great camera work and explanation of tools fluid and important torques 👍

@FrogsAngelsLondon Год назад

You're welcome

@pete_boy71 Год назад

nice vid. but very laborious, just pull the kardan out the back and it`ll work fine...👍

@philippepougneaud1047 2 года назад

Magnifique job.... Merci

@Flowsalvador 3 года назад

Thanks...!!! Excellent job.

@FrogsAngelsLondon 3 года назад

Thanks for the comment 👍 hope it helps

@pixelotix 2 года назад

Awesome video. So there are no crush washers or gaskets needed for this service? What general grease were using on the swing arm bearings and boots?

@robinsongguitars Год назад

After watching this I appreciate my simple chain drive bikes. What were the engineers thinking???

@FrogsAngelsLondon Год назад

Well the good thing is that you don't need to oil the chain every 200 miles.

@martinwood76 Год назад

Great video cheers

@kevinriley5847 2 года назад

Like several other commenter, I too am grateful for the concise and helpful video. And... I also am wondering if you could comment on what kind of grease you are using on the assembly? The ends of the boots? Thank you!

@danielribera2484 2 года назад

Gràcies, es un video molt educatiu; com tots els que fas.Seria bo que posessis la referència dels productes que uses o un enllaç on trobar-los.

@shades32uk 2 года назад

Very informative video , thanks for posting 👌

@FrogsAngelsLondon Год назад

Glad it Helped

@The3osforos 4 года назад

Perfect video! How long did it take to do the whole job?

@FrogsAngelsLondon 4 года назад

Thanks buddy. Count an hour altogether. An hour and a half with a cup of coffee or 2 hours with a nice break in between.

@tizianocrivellari9702 2 года назад

Sono indeciso bmw 1150 gs 50000 km del 2000 controllerò le cuffie del cardano però e euro 0 fatemi sapere qualcosa

@1ferdovic 10 месяцев назад

Perfect

@girandoachave6548 3 года назад

do you have any videos on how to change the front suspension oil? I need to change my GS oil, but I never did. I would like some tips. Congratulations on the video. I am from Brazil. Hugs.

@pulimedmed757 2 года назад

You have to put glue and not grease in the part where you cleaned to insert the cap.

@hansspitsbaard3667 Год назад

Good video! Is that new tie wrap used to keep the rubber boot in place?

@flexjay87 2 месяца назад

What is up with BMW and Torx head bolts ?

@raimundopenha2109 Месяц назад

SERVIÇO TOP

@fcoleroy3965 Год назад

Lleva 180ml

@keithrobinson5752 4 года назад

Very useful , but what are you using for the rubber boots grease wise ?

@FrogsAngelsLondon 4 года назад

Any rubber silicone grease would do really

@maresfr4 3 года назад

Hello, what kind of grease it is used for the spline and brop shaft? thanks in advance. greetings from México.

@FrogsAngelsLondon 3 года назад

Castrol Molub-Alloy White 'T' paste that can be found on Ebay easily.

@maresfr4 3 года назад

@@FrogsAngelsLondon thank you very much

@edmian3567 4 года назад

Mr Frog (can I call you that).... when I service FD and grease the spline, can i extract the shaft at this point to grease the spline at the drive end? Moly grease..... your thoughts would be appreciated... school of thought on the web is 60% for spline, I am in Australia... does get rather hot, i will be guided by your instruction... thx Ed

@tizianocrivellari9702 2 года назад

Officina bmw costo dell operazione chi fa da se fa per tre

@peterdewaele5698 2 года назад

what for grease youse you ( ceramique grease ?)

@nothingofmatters 3 года назад

Why you didn't add oil from the same drain hole

@FrogsAngelsLondon 3 года назад

Well nothing prevents you to do it that way. Try it and let me know how you got on!

@nothingofmatters 3 года назад

@@FrogsAngelsLondon I fill it like you did 😁, thank you for this nice vedio

@FrogsAngelsLondon 3 года назад

@@nothingofmatters very simple job that should be done regularly. Glad it worked for you. All the best my friend.

@dukeaug6165 2 года назад

传动轴抹的是什么

@보라-e9r 4 года назад

최고

@FrogsAngelsLondon 4 года назад

의견 주셔서 감사합니다

@ironhorsegladiator5034 2 года назад

Totally unnecessary, unless the bike was recovered from a river where it was submerged there for a week. Liked and Subscribed, the dealer would have charged $3,000 or more just in labor for what you demonstrated doing here.