Тёмный

BMW X5M F85 S63 Pure turbos stage 1 install step by step with pictures 🔥🔥🔥🔥 

Bimmer and Duramax maintenance and upgrade channel
Просмотров 7 тыс.
50% 1

My factory turbo wastegates were shot (major shaft play), and I thought i might as well get stage1 turbos from pure turbo. They were very helpful and informative, so far very happy with the purchase. They also provide better wastegates vs stock, make sure they send you units with updated wastegates. Heres a step by step on removal and replacement, parts list used (its been a month since install and my amazon crush washers hold up 💯 lol). I replaced factory plastic coolant T with a brass one, and used silicone 2.75” hoses for intercooler to turbo in place of factory rubber ones.
Overall install was easier than i thought, realistically its a full day job , make sure everything torqued to spec and double check everything, otherwise not bad of a job at all.
These turbos offer more solid pull throughout the rpm range, drivability is very close to stock, i am very happy with these amd definitely would recommend for the money. Car will adapt to the turbos, but you can retune as well if the need arises.

Опубликовано:

 

6 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 34   
@skillz1855
@skillz1855 28 дней назад
Those washers will hold forever only different is the oe won't fall off during installation. Great work
@Dentprotony
@Dentprotony 26 дней назад
Yes 0 issues still
@AutoLust
@AutoLust Год назад
Yet another great informative video! This channel is going to take off 🚀🚀🚀
@Dentprotony
@Dentprotony Год назад
Thanks Kory, hopefully will pick up more views and subscribers, i have a few more videos ill be adding shortly! Appreciate all the support!!!
@AutoLust
@AutoLust Год назад
@@Dentprotony No problem at all and thanks for always supporting the AutoLust channel as well!
@adityaprakashdevdogra8657
@adityaprakashdevdogra8657 10 месяцев назад
Thoroughly enjoyed this very informative & well put video. 👏
@jyuen801
@jyuen801 3 месяца назад
What's size crush washer did you use from the Amazon kit for the oil feed line? Also where did you get the intake silicone couplers and size?
@Dentprotony
@Dentprotony 3 месяца назад
I used variety pack from amazon, one of them fit well. Silicone is think i got it from intake couplers or silicone couplers.com sprry its been a while, i don’t remember exactly, it was 2.75 dia 3 inch if I remember correctly, but not 100% sure sorry
@djlazarek5830
@djlazarek5830 Год назад
Does it look like there's enough room for a 3" elbow to a 3" pipe in place of the factory intake boot? I have a set of new oem s63 turbos I want to machine the outside of the intake on the compressor housing to fit a 2.75" x 3.00" elbow on and use a 3" 45 degree carbon fiber pipe to goto the air filter housing using a 3" x 3.25" coupling
@BMW_xDrive
@BMW_xDrive 11 месяцев назад
wow what video. worth to watch. i have questions; i have diesel car bmw x6 g06. is it possible to make it sound like v8?
@Dentprotony
@Dentprotony 11 месяцев назад
Im afraid i wont be able to suggest how to improve the sound of your x6 sorry
@BMW_xDrive
@BMW_xDrive 11 месяцев назад
@@Dentprotony i will figure out bro.
@alexadamovych3640
@alexadamovych3640 Год назад
Can we get the parts list? Part numbers? Thanks
@Dentprotony
@Dentprotony 11 месяцев назад
Ill try to make it, but at some point in the video i show all the part numbers i think
@ericbilt25
@ericbilt25 2 месяца назад
How does the car perform with these Stage 1 turbos? Did it make a difference overall?
@Dentprotony
@Dentprotony 2 месяца назад
More linear/consistent pull throughout rpm range, feels solid. I cant say difference is insane but definitely feels solid
@ericbilt25
@ericbilt25 2 месяца назад
@@Dentprotony Nice! Good to know. Custom tune or just ots? I just sent mine in to have them converted to the Stage 1. The wastegates were rattling and hopefully they send it back with some new actuators.
@Dentprotony
@Dentprotony 2 месяца назад
@@ericbilt25 make sure they replace the wastegates (forgot on mine on first try), i run bpm stage 1 tune
@ericbilt25
@ericbilt25 2 месяца назад
@@Dentprotony Glad to know you’re on a stage 1 flash. You don’t get overboost with the catless dp’s? I’m currently on the stage 1 flash, but haven’t ran it yet with the turbos or catless dp’s.
@eddieclarke463
@eddieclarke463 7 месяцев назад
why didn't you wrap the downpipes?
@Dentprotony
@Dentprotony 7 месяцев назад
They have high temp coating already, no need to wrap over it
@mikane24
@mikane24 Год назад
stock clutch and engine ok with the pure stage 1?
@Dentprotony
@Dentprotony 11 месяцев назад
Yes, stage 1 improves the flow throughout the rpm band thats all
@taemookgang9973
@taemookgang9973 2 месяца назад
안녕 f86 x6m turbo upgrade 할수있어? 구매하고싶어 링크걸어줘
@BullyM6
@BullyM6 11 месяцев назад
Even tho the wastegate actuator arms were loose on stock turbos you’re still able to use them on the pure’s? I’ve been looking everywhere for a new set and can’t find them. Are they able to be tightened?
@Dentprotony
@Dentprotony 11 месяцев назад
Wastegates were loose, not the actual vacuum actuator. The bushing that the wastegate slides in was wore pretty bad, the actuator hole had a very minor wear, otherwise everything was working well and functioning as intended with the new turbos
@BullyM6
@BullyM6 11 месяцев назад
@@Dentprotony ahh okay so the problem is with the flap and bushing not the actual arm itself. I appreciate the clarity boss 🔥 good video. Gonna use it when I do my swap.
@Dentprotony
@Dentprotony 11 месяцев назад
@@BullyM6 make sure pure sends you turbos with updated wastegates. They didn’t on the first set they sent me
@BullyM6
@BullyM6 11 месяцев назад
@@Dentprotony is that an extra charge or just a request? I’m gonna get it, I’m just wondering.
@Dentprotony
@Dentprotony 11 месяцев назад
@@BullyM6 they supposed to do it, but mustve missed it somehow during rebuild process. Their slop was at least as bad as what my stock turbo had or even worse. But they handled the situation correctly
Далее
BMW S63 Engine | Common Problems & Reliability
12:19
Просмотров 18 тыс.
I Did This With Coffee! 🤯☕️ #shorts
00:22
Просмотров 272 тыс.
DESTROYING SUPERCARS IN BMW X5 M COMPETITION!
14:39
Просмотров 613 тыс.
BMW X5M X6M F85/F86 ceramic controls upgrade
10:39
Просмотров 2,2 тыс.
CAN WE MAKE PSHHH NOISES ON THE X5M??
8:58
Просмотров 3,8 тыс.
5 Things I HATE about my BMW X5M
7:17
Просмотров 77 тыс.
BMW X5M F85 REAR BRAKE CALIPER UPGRADE
14:26
Просмотров 9 тыс.
BMW M5 - Blown ENGINE Teardown  What went wrong ?
33:37
I Did This With Coffee! 🤯☕️ #shorts
00:22
Просмотров 272 тыс.