Saludos desde Ciudad de México me dio mucho gusto encontrás este video ya que Yo tengo un BMW Z3 2.8 y luego ni en la agencia de bmw saben la que se les puede hacer a las autos.
1. Car Engine and cluster data tESt 1.0 XXXXX VIN number (last 5 digits) tESt 1.1 XXXX K number tESt 1.2 Cluster Part number tESt 1.3 XXYYZZ Coding (XX)/diagnosis (YY)/bus index (ZZ) tESt 1.4 WWYY Week/Year of cluster manufacture (ww/yy) tESt 1.5 HH_FFF Hardware version (HH) and Software version(F.FF) tESt 1.6 FFF_CC E Injection Status, number of cylinders (CC), engine factor (E) tESt 1.7 XX_YY CAN-version (XX) and KI-revision index (YY) tESt 2.0 -- Cluster System Test - Activates the gauge drivers, indicators and LEDs to confirm function 3. Service Inspection Data tESt 3.0 LLLL Used fuel in liters since last Service Inspection tESt 3.1 DDD elapsed days since last Service Inspection 4. Fuel Consumption tESt 4.0 XXX Instant fuel consumption per 100km (X.XX liters /100km) tESt 4.1 XXXX Instant fuel consumption per hour (XXX.X liters /hora) 5. Distance Gone Consumption tESt 5.0 XXX Average mileage (XX.X liters/100km) tESt 5.1 KKK km to refuel (KKK km) 6. Fuel Level sensor inputs in liters tESt 6.0 LLLRRR Left and Right fuel level sensors (Left LL.L liters, Right RR.R liters) tESt 6.1 LLL Total tank level averaged (LL.L liters) tESt 6.2 LLL S Indicated value (LL.L litros) ans Satus S: S=1= Both sensors OK S=2 = one sensor failure S=3 = input not readable 7. Temperature and Speed tESt 7.0 TTT Coolant/Engine temperature (TTTºC) tESt 7.1 TTT Ambient/Outside temperature (TT.TºC) tESt 7.2 RRRR Engine speed (RRRR rpm) tESt 7.3 SSS Vehicle speed (SSS km/h) Input value in HEX form tESt 8.0 HHH System voltage ADC-Value Hex code tESt 8.1 LLLRRR Values HG left/HG right tESt 8.2 HHHHHHH Value brake degradation sensor (000=o.k.) tESt 8.3 HHHHHH Coolant/Engine temperature Hex Code 9. Battery tESt 9.0 VVV Battery Voltage (VV.V Volts) tESt 9.1 282035 ¿? tESt 9.2 044_34 ¿? tESt 9.3 0110 8 ¿? tESt 10.0 Country of destination. tESt 11.0 FFFF06 Cluster code tESt 12.0 Not used tESt 13.0 Gong Test-press trip button briefly to test chime. (if it is installed) tESt 14.0 000000 Errors memory (hex) 15. Status cluster I/O-ports (bit codes) 0=low; 1=high tESt 15.0 101010 105.0 tESt 15.1 001010 105.1 belt contact, seat belt fastened=0; tESt 15.2 111010 105.2 ignition lock contact, key inserted=0; tESt 15.3 000010 105.3 door contact, door open=0; tESt 15.4 101010 105.4 clock button pressed=0; tESt 15.5 101110 105.5 SI reset=0, for reset=0; tESt 15.6 101011 105.6 EGS transmission failure=0 Others tESt 16.0 1234567 ¿? tESt 16.1 ¿? tESt 17.0 HHMMSS time? tESt 18.0 Not used tESt 19.0 L-On / L-Off (to unlock, press button when "L-Off" to unlock functions in range 3-18) tESt 20.0 1000 Average fuel consumption correction factor tESt 20.1 xxx9 Sets ones position tESt 20.2 xx5x Sets tenths position tESt 20.3 x12xx Sets hundredths positionÇ tESt 21.0 rESEt Reset software ¡ it resets OBC settings supposedly tESt 0 End of test
MUY BUENA INFORMACION Y NECESARIA, DONDE PODRIA CONSULTAR LA LISTA DE LOS CODIGOS QUE ESTAN EN EL VIDEO, O PODRIAS SER MAS EXPLICITO DE QUE MOVER PARA DAR VER LOS CODIGOS Y TEST EN EL CLUSTER
