No video :(

BMX Bike Sizing - Understand Frame and Part Geometries

Подписаться 34 тыс.

Просмотров 1,5 тыс.

50% 1

🚨 Helpful Resources for BMX Nerds ➡️ linktr.ee/dougsterbob
💬 Join the BMX Nerd Network: geni.us/nerd-network-invite
❓ | Ask your BMX Questions
📸 | Show off your bike
📈 | Learn new tricks
⭐️ | Join a thriving community
Request a BMX Recommendation: geni.us/bmx-match-maker
0:00 - Intro
0:51 - Frame Specs
7:46 - Stem Specs
10:48 - Bar Specs
16:53 - Rims and Wheel Specs
19:35 - Freecoaster & Cassette Specs
21:36 - Crank Specs
23:47 - Forks Specs
27:15 - Tire Specs
In this video, I go over every single BMX spec that matters so that you can make an informed decision when making upgrades for your bike.

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@Dougsterbob 2 года назад

Enjoy BIG BOOK OF BMX SPECS!! Email me if you have any questions. douglas@dougsterbob.com

@sn0fx 2 года назад

26:00 big tip here, I stick with odyssey forks because they have a full 180mm steer tube, most other forks are in the ~165mm range, so if you want to ride a tall setup, go Odyssey.

@treeratkomolwejakul 2 года назад

Im using an Odyssey R serie fork, which has a long steerer tube length. I had to cut it out around 12 mm. to make my life easier. Thanks for many good bmx contents that you do. Have a great day.😃

@xxtingyxx9497 2 года назад

My BIGGEST regret thus far. I should have waited for your three recommendations in my inbox. Bought a kink gap 20.5 and a day later got your recommendations. You had me on a 21 because of my weight and size. Meh, brushed it off. Got my bike, felt great on flat ground, then I got it in the air. Second jump three broken ribs and pulled muscles galore. Super twitchy in the air and it cost me. Rebuilding the bike at 21 while I heal up for the next 4 weeks. Brand new rider and I should have listened. At 34, the ground hurts much worse than I remember at 22

@XxFarrinxXv2 2 года назад

I am so glad I found your channel. Quality content.

@jasonkris3374 2 года назад

I definitely needed this video 💯

@bro1456 2 года назад

20.3 is my first bike but i moved to 21 inch but the standover is 7 inch but its quite controllable

@jimmyjohnson866 2 года назад

Also with bb height, if its high enough you can do switch crooks with a 28t sprocket. While if your bb height is low your sprocket could hit the rail.

@Bmxr1991 Год назад

Back in 07 I built a standard 250s, 21 inch, 74.5 head tube. Fl stem and 8” bars, I ran odyssey r32 forks with 14mm dropouts and a profile 3/8 female front hub with no adapters. No bike ever felt as good as that one did. Do you think the 3/8 axle in a 14mm fork drop out could have made it steeper like a 28 offset or vice versa? Been wondering and occasionally thinking about this for about 15 years. 😶