You're DIY builds are top notch, some are better than the accessories being sold in the stores. You save us guys a lot of money, much appreciated bruddah..
Only a true craftsman puts a cutting board on a drop cloth to prevent it from getting scratched too bad, Damn good job son. You are an inspiration for sure...
I live in Winston Salem, NC. Every year from April thru August we have a city event called Bulky Item Pick Up. People can put just about anything on the curb during their week. We go around and pick up conduit, plastic pipe and all kinds of things. It is a DIY paradise. Enjoy your videos. Keep it up.
You are a good man ! You have a bunch of great ideas ! I saw your video and I just ordered a big chunk of plastic off of Amazon and it will be here in a couple of days ,and my neighbor friend got a 1/4 by 20 tap set , I got a half inch rod that I am gonna drill and tap for a sis bolt and it fits in my oar lock just right ! I want to thank you again for your great ideas , for us people that ain’t got a lot of money .
OUTSTANDING BROTHER!!!!! That looked every bit as professional as any of those $100+ cutting boards that are out there!!! Sure beats the two 3/4 pieces of plywood that POP and I use!!! That was outstanding!!
This is another great DIY👍🏻 one thing I would add is a small opening towards the back for the water to drain out when I spray the board with the hose. Thank you! Don't stop posting 👍🏻
Thanks to your video I made a custom cutting board for my boat. The total amount for materials, including a seat mount and side mounted organizer, was $150. The cutting station turned out fantastic and looks like a factory operation for my Lowe boat..
That's awesome man , hey you think you could send me a picture of it , I would love to see your work brother . My Email is on my about page if you ever need it . It's keiff32@hotmail.com I really appreciate you watching buddy and if theres anything I can fo to help you out or anything you'd like to see I'll fo my best
Good that's what I make em for, I'm the same way when I watch other ppl work , my brain starts thinking of all kinds of stuff lol . Thanks for commenting brother
Just made me a fancier version that holds 2 drinks and 5 shot glasses for entertaining and cooking on the new swim platform .. I only used 1 1/4 long #6 screws lol
Thanks for the video. I made a slight modification some people might find useful. I used a heat gun and peices of wood to bend one of the sides in about an 1.5in by 5in in length. This "clean" outside of the board spot is where I drilled spots for a knife, pliers, and quick connect so I can hang the towel I wipe my hands with.
I really appreciate your time for making this video! I'm in the same predicament not wanting to buy a new one now I don't have to I'm going to build the one you just showed us
It wasn't a hard build but something I noticed after making 8is you can buy 3/4" cutting board I bet that would work even better , I appreciate you watching and commenting, the feed back really helps me brother
Cool board, needs a slot on one side to let water and slime to drain off the board, I have one that I use to clean fish and cut bait, mine doesn't have sides like yours does ! I can fix that now. Thank you . Keep them coming .
nice project and we use a lot of the UHMW plastic in our machine shop. I wanted to hand you a deburring tool, hehe. one thing for people to watch out for is sometimes its best to use a dull drill on plastic because a super sharp tool can "grab" in the soft stuff. great looking end results
Thank you that means a lot coming from you , I appreciate you watching and commenting I love feed back so if you see anything you would change or something you'd like to see let me know
A cooking platform check I'll put that on my list of things to do haha , I appreciate it buddy , I got a favorable comment from the toughest critic haha
I appreciate that more than you know , I always tell my buddy only ppl that edit good notice good editing when they see it lol so back at ya lol . When I watch other ppl videos I'm paying more attention to the way they edited it , than the actual content , I learn allot watching other peoples work
Another good video,I made my cutting board,too. a few years ago, should have made a video of it ,you can see it in some of my videos, I have it mounted on a seat post at the back, works real good, your will work good too.
I figured you have made away least one your a very crafty guy , it wasn't too hard to make but I can think of some things to improve it next time , thank you for commenting Mr Anthony
Ronnie Carrasco thank you Sir I appreciate that more than you know brother , I enjoy making em , and I appreciate you watching and commenting. If you have something you want to see let me know I try and read all the comments and feed back is always welcome and helpful brother
@@FishinNStuff did you make those rod holders on your boat or did they come with the boat. I have a center console boat and was thinking of adding some rod holders to the sides of the console. Just wondering.
I made my rod holder bases the monster rod holders are mounted to ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gzPNhMPYrrg.html But the other ones that I store my rods in kind of like the ones on a center console I bought on Amazon they are stainless steel
I really like the Grizzly boat line , and I love my little boat but I'm in the process of upgrading and decided to go with a SeaArk mainly because there live wells to be honest, my le boasts going to be a center console so I may be doing some videos based around that soon as I get it lol
I am making my own leaning post because SeaArt leaning posts just plain out suck and if you have a tracker you might find it interesting because tracker center consoles don't even have leaning posts
Maaaaaan that is AWESOME!!!! You going to having every man watching this out in the garage trying to make something lol .... Man i like that cutting boarding for real. Now let me go see what i have out here that i can mess up lol Fishin N Stuff
@@FishinNStuff man that's a blessing!!! I been out of town etc and its been raining and water levels up then down etc so I haven't gotten out as much but I do need to edit and put a video out but I'd rather be fishing lol man I cant wait to get out there this weekend..how did you do out there?
14 crappie 5 largemouth bass and 3 white perch and threw back 2 crappie that was too small , but we had fun , I think in another week or so they will be on fire , I love that spring bite
@@FishinNStuff 😯😯😯😯😯 man you killin it brother!!! Brother its raining yet again here so the water levels are all over the place so i cant go to some of the places i want to ... One of these days im going to visit NC ...we have only been there through the mountains of the Smokeys but not really really in NC.
Why did you make it so small? You should have used the old one to cut the sides in the back. A little sanding or a heat gun would have taken all the scratches out of it. Cut little rabbets out of the spare blocks so you have a place to slide your knife into. But make them length wise so the knife slides in and foreward. Make sure you cut a couple half round holes in the bottom of the backboard for drainage. In one of the corners drill two 1/2" holes about 2" apart then cut the middle out so you have a place for pliers or scissors. Looks good though
It's just a demo of what you can do , the video is for ideas not how it had to be done , I'll most likely make another one when my new boat arrives. Thinking of one for the track system
Love the DIY projects. What ya got for a pontoon rod holder. What I have hangs from the bimmine top so they are somewhat protected from the Florida sun. Thanks for the videos.
diy kayak cutting board would be awesome to see… i have a wilderness systems recon 120hd and trying to figure out how to build a cutting board to cut up bait on the gulf coast of florida!!
Just made one myself and that cutting board plastic is some tough stuff to drill through but got it done now to figure out where to mount it on my little catfish boat
Hey Keith, you did an Awesome job with that cutting board!!! When I was still driving big truck locally I useta get that cutting board. I believe it was piedmont plastics in Charlotte and another place in kings Mtn.. I actually give it all away 😃. Hey brother have a good one my friend. ☆Jay☆ 👍👍
Thank you brother, that physic is pretty expensive I've heard any way I would just buy a big cutting board off Amazon and use it personally. I always appreciate your comments buddy
SK's CRAPPIE Catchn Adventures thanks brother , speaking of crappie lil that's where I'm headed now I love spring time crappie fishing , I appreciate man , I a take some of your pointers and go to work on em
Found your video because I decided go buy some HDPE to build one myself and I was stuck choosing what to pick for a mount. I think I'm gonna keep looking for a rod holder mount or build one myself but definitely a great video
Something like this RAM MOUNTS (RAM-B-101U-CIP1 1" Diameter Ball Mount with 2/2.5" Round Bases That Contain The Amps Hole Pattern www.amazon.com/dp/B00JUW632S/ref=cm_sw_r_cp_apa_i_xf3WDbYV3NQVV
@@FishinNStuff That's actually exactly what I'm looking for in terms of the ball mount, thanks! Going to find a way to mount it to some aluminium pipe for the rod holder.
That's a good idea , you could use some pvc with a cap in the end abs and bolt it to the cap , you can even heat the pvc and press it in the rod holder so it's tighter
Like the idea think I'll use the router make some channels for sides and back insetem half inch little bit silicone under and some screws should be good
Good idea for cut bait and could actually be smaller for that.. It probably would need drain holes slots in the back of the board where it meets the backboard and a tilted mount to mount it in your rod holder where it could drain the goo overboard.
I think I talked about it on this video . I made it before I started RU-vid to weld on ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LfLW9mC3shw.html
Just out of curiosity what screws did you use to mount it to the seat platform? The reason I ask it because they didn't go all of the way through the board. 3/4 inch I'm thinking? I've watched so many of your videos. You are one crafty dude!
Another way to secure the sides and back is to use liquid nails “Fuze It’s” it holds just about every thing and if you drill small holes in the the material it will even better hold and never rust!
I really appreciate you watching, that means a lot too me . I just try and help ppl plus I love too build stuff lol . This is the Link to where you can get a stick or if you want something special leave my wife a message and let her know ok www.etsy.com/shop/PebsPrettyfuls?ref=search_shop_redirect
I would but I work a lot already and RU-vid is like a second job lol I would rather make DIYs so people can save money and make they're own . I appreciate you commenting though brother it encourages me buddy
Built one for my minkota I pilot, used similar plastic 3/4 inch thick, used a hole saw to cut a hole the size of the shaft and screwed it to a flat piece to make a t beam the width of the gunwale then screwed it to the gunwale, next cut a small piece to cover the top of the t beam put 1 screw in one side so you can rotate it out of the way when you deploy. I'd add a pic but the boats in storage for winter.
I think you should give it a try , I have to take my time and sure things look good because I'm doing it on camera , but let's face it... it's a cutting board , it'll have blood and guts all over it lol . You can do it brother . I appreciate you watching and commenting it's ppl like you that encourages me man . Send me a picture of it after your done via . Email or FB I've been collecting em of off other ppl might do a video one day of em
That's all you need , in fact that's all I had for years , my garage is behind my house and its not all that lol I've got a drill press I bight my wife for Christmas and a small welder . But its nothing like a professional one lol
Well you'll be able to make a dang awesome cutting board with all that lol . I appreciate send me a picture of what you come out with man keiff32@hotmail.com
Rick Bokern i work in the construction trade doing fire sprinkler systems...they had pieces left over doing the stalls in the bathrooms...so i got a sheet
Any edges that are not going to be in contact with a surface hit it with a router. Or if you just want a light curve lightly hit it with a heat gun or a torch but go easy.
