Boat Oil Change: 1999 Nautique

Подписаться 11 тыс.

Просмотров 35 тыс.

50% 1

This is a 1999 Ski Nautique with a 5.8 liter PCM.
I walk you through the whole process to changing out your impeller. This boat that I am using is a 1999 Ski Nautique with the Ford Pleasurecraft (PCM) 5.8-liter engine. Many models and engines may have a similar set up like this engine.
Here is the IMPELLER I used:
amzn.to/2pQD4pC
Check your manual to make sure this impeller would fit yours.
Please support the channel by subscribing. goo.gl/nD3r4v
Subscribe!! goo.gl/nD3r4v
If you enjoy the content and want to help me with my projects, you would make a huge difference by making a small donation. Thank you: PayPal.Me/justi...
Hello Everyone, my name is Justin White. Ever since I was young I was always fascinated with how things work. Wherever I am going, I constantly look at how and why something is working the way it is. With my RU-vid channel, I am able to give accurate and credible videos to the viewers. Cluengineer or "Clue in engineer" is a guide to a solution. Many of my videos are how to, fix it, and explanation. Come join the community and subscribe, like, and share.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@keithcofer5515 3 года назад

Hey Bud, I also have a PCM 5.8 liter HO and have been doing all my service for 25 years. You do everything exactly like I do, and you are spot on with your technique. You are a master, especially considering your age!

@92813justin 3 года назад

Thank you Keith!

@pfettig77 4 года назад

Ha! I'm 42 years old and I still yell "dad!" too when something is stuck.

@92813justin 4 года назад

Haha, I had to keep that part in their. It was too funny

@keithwilliams2766 7 лет назад

I like your paper towel in the plastic baggie tip. I'm going to remember that one.

@92813justin 7 лет назад

Thank you! It really helps keep your boat clean.

@Robcadams1974 2 года назад

Couple things. Can you do a video on changing transmission fluid and I noticed you have a depth finder. Where is your transducer mounted?

@josephadvincula6636 4 года назад

Justin, thank you for all your videos. Got my 2002 Air Nautique 196. This is my first boat, and I'm a little bit scared in doing what your doing winterizing your boat. But as I watched your video, it gives me a little bit of confidence of doing it. Sure saves me allot of money if I do it myself. Pls keep up the great videos, very informative. Greatly appreciated as well, all the info & advice that you give out. Thank you so much.....

@92813justin 4 года назад

Joseph Advincula, if you follow these videos you will be set. It saves you a lot of money and a piece of mind it was done right. Thank you for the amazing feedback. :)

@nickatnightime 3 года назад

Awesome instruction! Clear and concise. Your the best!

@92813justin 3 года назад

Thank you!

@erico6247 4 года назад

Good job man! I love watching your videos as you explain everything step by step as it should be done! Great job kid!

@92813justin 4 года назад

Thank you! I just uploaded spark plug install video if you are interested: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9cdRj45kiaw.html

@kens3475 4 года назад

Nice work. This engine is a little special - it needs zinc in the oil. I only run valvoline vr1 40w in my gt40.

@flite26 3 года назад

My boat shop recommended this too, and he also said use 20/50 if you can get it. I got it for $30 on amazon for a 6 quart case. Just did my first oil change to winterize...

@ChrisThompson167 3 года назад

@@flite26 thanks for that. Ordered

@andrewcronin5544 3 года назад

Love watching your videos man. I also have a ski nautique! Was wondering if you’ve started a tik tok yet with all these great boat how-to vids?

@hankhenry9199 7 лет назад

Good job Justin, keep up the videos. Have you ever removed the transom seat? If so, how.

@92813justin 7 лет назад

Thank you, Hank Henry. The videos are coming every week. I have removed the rear seat plenty of times. This is a great suggestion and I will make a video on how to remove the back seat.

@EvoDave42 5 лет назад

Hank, the rear set may seem 'stuck in place because the rub rail cushions interfere with the seats movement out. The seat will come out, but it needs to be finagled a bit. I have friends with the same boat, and they all seem to come out differently. I use cardboard wedged between the rub rail cushions and the rear seat to keep the rear seat from cutting into the rub rail upholstery when I wrestle the seat out. That rear seat design is pretty lousy ! Part of what makes it funky is the allowance for the ballast tanks. Even with that, I don't see why it could not have been better designed to 'lift' out vertically like the old Mastercraft Prostars !

@rodchristopher6900 4 года назад

hey, love the video! was wondering what kind of oil filter did you get and where did you get it? thank you.

@Ronix24Wake 6 лет назад

Hey mate great video love your work .. just wondering did you warm up the boat without hooking up a hose to the impeller can you warm it up without doing that ..

@92813justin 6 лет назад

mitch b I did not start the boat without any eater. It's called a fake a lake. Check out my video on it!

@Ronix24Wake 6 лет назад

CluEngineer thanks mate

@Rob-qd6nh 3 года назад

I have a question. I have a 330 pcm Excalibur engine. The steering is hard when turning left but soft when turning right, only in the water though. Out of the water it turns normal. A friend said to check the power steering fluid by belt tension. I look but can’t seem to find a steering pump. Or maybe just can’t see it because engine sit low in the back of boat. Do these engine have power steering pump and fluid.

@92813justin 3 года назад

Ski nautiques do not have power steering. It the pressure only when you are moving? If so there is a trim tab on the rudder you can adjust.

@Rob-qd6nh 3 года назад

@@92813justin thank you very much. Yea my rudder have 3 tabs. On it. Now that you say that... I remember seeing my dog biting on the rudder where the tabs are at. How and is it easy to adjust or should I take to shop, for professional. Thank you a lot

@JLHarper711 3 года назад

How do you get the center drain plug out of the center of the boat? I have a older 1986 Marlin i can see it but don’t know how to get the thing out. Thanks

@92813justin 3 года назад

I reach down in a weird angle and unscrew it. Be super careful when your engine is hot.

@JLHarper711 3 года назад

@@92813justin I got it thanks bud love the videos

@TheRandrx2 4 года назад

If you take off the oil fill cap, it may drain faster.

@92813justin 4 года назад

TheRandrx2, I usually do that. I also sometimes pull the dip stick out a little.

@andresherrera398 Год назад

What type of oil are you using?

@92813justin Год назад

SAE 40 Pennzoil

@ChiliStyles 5 лет назад

Song at 40 seconds?

@gerardomolinari6640 4 года назад

Great video thx!!!!!

@92813justin 4 года назад

You bet!

@samhansen527 6 лет назад

How did you find a TSC1 with 230 hours? Ski it Again? Boat trader? I'm hoping to be in the market for one of these exact boats (I'd prefer a 1998 or 1999, but would be okay with a 1997) within the next couple years and really want to find one that's in this nice of shape.

@92813justin 6 лет назад

Sam Hansen I purchased this boat with 60 hours a couple of years ago. This boat was parked under a carport for 3 years and never saw it move. I ended up emailing him to see if he was interested in selling it. Turns out he did and it has been such a great boat! Go with nautoque!

@samhansen527 6 лет назад

Awesome. Great find! I ski behind a 1998 Ski Nautique with a GT40 very frequently and love the hull. I have skied behind a lot of boats and enjoy my time behind my club's 1998. Within the next few years, I'd love to pick up one of these or a 1995-1997 MasterCraft ProStar 190, but I'd prefer the 'Tique. Thank you for doing all these maintenance videos.