Boat Transformation | See the "Start to Finish" Transom Replacement on a Bertram Moppie!

Подписаться 232 тыс.

Просмотров 32 тыс.

50% 1

Although I didn't have shop time this week, this is still something that I wanted to put together to see the progression of the transom upgrade / replacement start to finish in a single video :-)
Hope you enjoy as much as I had fun putting this together!
Have a great weekend and as always thank you!
Support the companies that help to make these videos possible (their products are the best out there, otherwise I would not be using them!!) Learn more about them below:
- Totalboat: www.totalboat.com?sca_ref=3262338.9r8aHUCXrZ
- Alexseal Yacht Coatings: bit.ly/2tdNzZKA...
- SoftSand Rubber Nonskid Discount 10% OFF when you use code BWT10
www.softsandrub...
* Order Total Boat Supplies HERE and Help Support Boatworks Today with your purchase!:
www.totalboat.com?sca_ref=3262338.9r8aHUCXrZ
** Looking for help with your project? Check out my Patreon page for consultation options!
/ boatworkstoday
*** Need help choosing the best resin for your project? Download our fiberglass Resin Guide:
bit.ly/2PCr72e
**** Subscribe To This Channel!!
www.youtube.co...
***** Shop our Amazon store for the materials used in this video!
www.amazon.com...
There is additional content and ad-free versions of these video’s available for Patreon supporters! Please click below to find out more!!
/ boatworkstoday
#BoatworksToday #TotalBoat #Alexseal

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@josephk2958 Год назад

Watching the transom rebuild little by little over the course of months did not do justice to the amount of work it was. This vid puts that in perspective. Very well done!

@michaelhanewich245 Год назад

You could hang a Series 60 Detroit on that transom now.

@rockyrf3 Год назад

Andy love watching you an learning new things. I’ve worked on boats all my life (not as extremely as you). I always am learning and appreciate you showing all you do. Great job an Thanks much. Rocky 👍

@zacharywinters9413 Год назад

I remember all of that.

@copperheadmarine 3 месяца назад

Was it converted to outboard power?

@michaelspooren9213 Год назад

The transom is done, great work. ❤️ I just don't quite understand why the Cusa plates don't go all the way from starboard to port

@boatworkstoday Год назад

it would have covered the Id tag for the boat :-/

@dnomyarnostaw Год назад

@@boatworkstoday huh? I just watched you cover the tag of the boat with glass, wondering if you needed to do something official

@trinitytoo Год назад

@@dnomyarnostaw Fibreglass is transparent; cousa is not.

@stevewalkup6569 Год назад

One of the best time lapse video you made

@murataydn7513 Год назад

Ellerine sağlık dostum bu işi gerçekten prfosyonel yapıyorsun.

@ashtonwilliams7309 Год назад

That transom will NEVER need to be replaced again! Lol great work andy

@hullhealersboatworksrestor4377 Год назад

What blades are you using on the multi tool? They seem to work great. The ones I used to order are impossible to find.

@exoc1 Год назад

I love watching someone who knows his stuff work! And im a bit allergic to see people mixing wood and plastic, this makes me like this rebuild even more. : )

@agentorange2554 Год назад

When the wife won't shut up, just crank up the chainsaw........I've always said that!!!! LOL

@StonyRC Месяц назад

LOL - you are "infuriatingly" ingenious!!!! Some of the methods you use to either measure, pattern or adapt the components you use would NEVER occur to me. You make it all APPEAR to be so easy ... and it's NOT. Thank you for posting so much content.

@sailingyachtrocknroll8402 Год назад

Just found out something really cool. I was watching an episode of The Duracell Project and Mads stated he kept his rollers in an acetone bath. I had a roller clogged with cured epoxy so left it in a plastic pot of acetone for 3 or 4 days after winch the epoxy had comply softened. All I had to do is scrape it off with a screwdriver and it’s as good as new. Every days a school day! Love you new workshop. Cheers Ian

@sammie6791 11 месяцев назад

Sweet baby jesus! You could hang approximatly 7.5 bajillion horse power off that thing. Very neat work all the way through. Compliments to the chef.

@212caboose Год назад

I hate to admit this, but I've forgotten exactly how much work and effort has gone into this transom replacement! It's certainly been a trip!

@jackrichards1863 Год назад

Crypes⁉️hell of an undertaking‼️ you've made me curious with this of what the sheets are within the transom ? MASSive job still! I'll never attempt anything quite like it. It's so much dependable done by an experienced hand than frigging about as a novice trying to be miraculous

@theauserican3564 7 месяцев назад

Good morning. What is the products used between the coosa board and the original fiberglass transom. It’s the white paste you apply to take up any low spots between the coosa and the glass. Thanks

@nwrx247 2 месяца назад

When the epoxy resin was poured over the coosa board,in the manner it was spilt it resembled a silhouette of a lady.

@HeyUncleArt 5 месяцев назад

Great job! I been watching you for years. I see you used gel coat and laminated over it. Is that a good bond? I always grind the gel down to glass. Is it OK to leave some gel and glass over it?

@herculesbrah Год назад

Wow lots of work! I was wondering if you could give me an opinion on how i should approach my project? I have a 1996 maxum 2300 cc; The boat has an inboard sterndrive setup but the back of the boat is not flat; what would you recommend for me to do if I want to put an outboard on it? should I just cut out the the back of the transom and try to reshape the back flat and put a bracket on it? or do it where I shape it enough where the outboard can just sit on top of the transom like how new boats are made? Would love your input.

@alexalex7375 Год назад

I watched your videos very interestingly, I myself have been a seaman for more than 24 years, if you have the opportunity to learn your craft, write to me I will be very glad, thank you

@sallucido852 Год назад

Hi Andy. I am working on a project . It’s a 23 foot pro line with a flat back for the motor and I’m wondering would it be easier to go from the inside for doing the transom or Cut the outside off?

@Allan-pyrotechnics Год назад

I have a question on how to replace my transom on a 1970’s Chrysler skier how can I send u a pic

@abuomar7756 Год назад

thank you my friend really it's great i wish you happiness

@gillesgomez3091 Год назад

What a huge amount of work. I don't even remember when you started to work on this transom. Now it's easy to understand why so many boats with a rotten or just damaged transom end up in a scrapyard. It is not economically reasonable to have it fixed by a professional. This boat was very lucky to find you on her way!

@renatoramacola7966 Год назад

What type material was used for the transom...?

@marksmith296 Год назад

I have the most respect for your work, but how on earth can you wet out glass and not get it all over the place? I would have had to blanket the whole area.

@chasingsunsets380 Год назад

Wow Talk about putting a time capsule onto the amount of work that took. Fantastic. Each time you worked on it you explained what was going on and the challenges you were having. Somehow with this video, all the other videos come together in your mind as you watch and the immensity of the transom rebuild comes together and the amount of knowledge you have put out is gathered together as a whole. Thanks for the series.

@TheOjoneso 5 месяцев назад

Hi Andy. What thickness coosa did you use as wellas final thickness and did you use laminating polyester throughout until the very end? Great job brw. Thx

@beefcakes27 Год назад

I'll have what Andy had for breakfast..

@Starboatbuilder Год назад

Hi Really great Vlog - could be even better than the 3-part on rudder fix. Keep it coming

@yepyep340 Год назад

Whoa! BEST VID EVER! thank you.

@martinmicallef4847 Год назад

What is that yellow hand held cutter your using to cut the cloth with?

@hecdc7703 Год назад

Looking great. Nothing like a job well planned and done.

@slagletoby 4 месяца назад

You need to wear a Bob Ross wig for an episode.

@akja9188 Год назад

What a journey now onto the fun stuff! Newer and better pastures

@cptsearay8100 Год назад

Where can I purchase that battery operated shear?

@nossrc5638 Год назад

What is the white liquid Cabosil ????

@kencarter3616 Год назад

You're an artist.

@jrehtil1494 Год назад

Great editing job

@scottcates Год назад

Superb work

@skipbaker529 Год назад

Awesome!

@exactodo Год назад

Specchio di poppa a regola d'arte

@fridolfmane1063 Год назад

What compels this dude

@blackbeardboatworks242 Год назад

Looks Great! I'm going to steal your chainsaw idea! lol.

@sailingenki2038 Год назад

Hi, really appreciate your channel its helped a lot during my restoration of an old danish1968 jupiter 40 motorcruiser. I've almost completed a 10ft by 3.5ft swim platform with steps either side using your fibreglassing techniques so thanks for that! Question, do you have any videos on repairing the Hull paint work? There's a few scuffs that need filling etc but mainly OK, just like to know how to go about getting it ready to repaint. Thanks

@JimDorn Год назад

Damn!! Completely forgot about you whipping out the chainsaw

@Otrepiena Год назад

Veramente bravo !!👍

@robertschulke1596 Год назад

Amazing job and first rate results. For all the work though, wouldn’t it have been easier to just cut the transom off and build a new one?

@renatoramacola7966 Год назад

The dark gray stuff

@davidhall1779 Год назад

if I had only watched the combined before amd after video I would think you did this project in a day or so. Lol but I didnt. watched every single update as you went along. that was a lot of work in and around a whole lot more. thanks for bringing us all along. still want to see you finish it off though.

@iknownothingaboutsailing5308 Год назад

I love your channel! Wish you put out videos weekly. Kinda gone missing in action

@danielturco5809 Год назад

This video made the journey seem virtually painless. I've enjoyed watching the process and admire how you were able to maintain momentum, after the hectic year you have had. It looks better than factory- maybe you should get a plug and craft a boat from scratch, the way they should be built!

@davidmontgomery1016 Год назад

That was a cool view of the work. Enjoyed it. Just one question. Is there still a green smudge on the bow? Every time you use it as a background it bugs me to see that beautiful, shiny blue hull with that spot on it.

@daveevans7438 Год назад

Great job Andy! Very skillful. Not only in the execution but in the setup and staging of products and material to get the most efficient working time.👍

@brettwillis728 Год назад

You make it look easy lol

@lifeofdave1237 Год назад

Great recap Andy 👌 a lot of hard work and sweat went into that for sure. Hell, makes me want to rip my transom out now 😂

@bernardchartier1636 Год назад

You are thé best!!!

@dougmacleod1942 Год назад

Great compilation of the work on the transom, thank you for sharing.

@romnorte Год назад

Awesome job. Is the name plate still visible? It looked like you laid two layers over it.

@danlucci9246 Год назад

Are you going to show the hull stringer termination you started last week?

@BPratto Год назад

Have been watching this rebuild for what seems like forever, thanks for putting all that went into it a start to finish video

@ruaraidhmcdonald-walker9524 Год назад

Ready for stern drives now then? 😉

@prussiaaero1802 Год назад

Big thumping Hamilton Jet from NZ would be nice!

@prussiaaero1802 Год назад

Really groovin to the sound track on this one!

@dennisjordan8992 Год назад

Beautiful Skills!!!

@boatworkstoday Год назад

Thank you!

@stevejackson4136 Год назад

Your work is excellent. At the end, why didn’t you preset the tabs like earlier? I am in the process of rebuilding a 1979 Checkmate Enchanter. Thae multi tool is an excellent tool but LOUD! I bet my neighbors will call the law on me before I get done.

@stevejackson4136 Год назад

Prewet

@richardtharp1608 Год назад

Very Good and Necessary Video to catch Us up, Thanks Andy .. Is the transom Finished Outside as well is my Question.. Thanks

@boatworkstoday Год назад

technically yes but I'll be re-painting everything at some point :-)

@PBVader Год назад

Awesome way to show the big picture.

@ascott6804 Год назад

That's not going anywhere!! Like art!

@FireCrowsWorkshop Год назад

Damn, how long have you been at this project now? But the result is looking good!

@boatworkstoday Год назад

Too long, but there have been a lot of changes for us the past couple years and the boat had to take a back seat for a while

@yepyep340 Год назад

@@boatworkstoday yeah, only moving, buildout, room additions, drive way, I think a business start up, SNOW! dude! You deserve a vacation!

@oldwillie313 Год назад

How many years did that take?

@stefanoskolettis Год назад

😵‍💫😵‍💫😵‍💫

@donaldpetrey3064 Год назад

Amazing progress Andy

@johnq5284 Год назад

Awesome Maestro.

@rumnboats7612 Год назад

looks awesome, will that be enough to hang all the outboards off of though not going to top or tied into sides?

@1982mako224 Год назад

Love the channel but no way would I want that work done on my Bertram if I had one. The stringer ends have me shaking my head too. If its a lake boar though it might be fine.

@boatworkstoday Год назад

Oh, just wait ;-)

@rumnboats7612 Год назад

@@boatworkstoday :)